[PATCH 0/2] iio: adc: add support for pac1921

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add iio driver and DT binding for the Microchip PAC1921 Current/Power
monitor.

Implemented most of the features with few limitations listed in the
driver commit message.

Tested with a Pine64 host board connected to a PAC1921 click board [1]
via I2C. The PAC1921 click board embeds the Microchip PAC1921 device
and a 10 mOhms shunt resistor. The PAC1921 datasheet is at [2].

[1]: https://www.mikroe.com/pac1921-click
[2]: https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf

Signed-off-by: Matteo Martelli <matteomartelli3@xxxxxxxxx>
---
Matteo Martelli (2):
      dt-bindings: iio: adc: add binding for pac1921
      iio: adc: add support for pac1921

 .../ABI/testing/sysfs-bus-iio-adc-pac1921          |   45 +
 .../bindings/iio/adc/microchip,pac1921.yaml        |   79 ++
 MAINTAINERS                                        |    7 +
 drivers/iio/adc/Kconfig                            |   10 +
 drivers/iio/adc/Makefile                           |    1 +
 drivers/iio/adc/pac1921.c                          | 1033 ++++++++++++++++++++
 6 files changed, 1175 insertions(+)
---
base-commit: 529d2e1900642eba6df28307e26e19793e227546
change-id: 20240606-iio-pac1921-77fa0fa3ac11

Best regards,
-- 
Matteo Martelli <matteomartelli3@xxxxxxxxx>





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux