Add the coefficients for the IIO standard units and the IIO value
inside the chip_info structure.
Move the calculations for the IIO unit compatibility from inside the
read_{temp,press,humid}() functions and move them to the general
read_raw() function.
In this way, all the data for the calculation of the value are
located in the chip_info structure of the respective sensor.
Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
---
drivers/iio/pressure/bmp280-core.c | 168 +++++++++++++++++------------
drivers/iio/pressure/bmp280.h | 13 ++-
2 files changed, 108 insertions(+), 73 deletions(-)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 49081b729618..9ff26a8e85d3 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -445,10 +445,8 @@ static u32 bmp280_compensate_press(struct bmp280_data *data,
return (u32)p;
}
-static int bmp280_read_temp(struct bmp280_data *data,
- int *val, int *val2)
+static int bmp280_read_temp(struct bmp280_data *data, s32 *comp_temp)
{
- s32 comp_temp;
u32 adc_temp;
int ret;
@@ -456,16 +454,15 @@ static int bmp280_read_temp(struct bmp280_data *data,
if (ret)
return ret;
- comp_temp = bmp280_compensate_temp(data, adc_temp);
+ *comp_temp = bmp280_compensate_temp(data, adc_temp);
- *val = comp_temp * 10;
- return IIO_VAL_INT;
+ return 0;
}
-static int bmp280_read_press(struct bmp280_data *data,
- int *val, int *val2)
+static int bmp280_read_press(struct bmp280_data *data, u32 *comp_press)
{
- u32 comp_press, adc_press, t_fine;
+ u32 adc_press;
+ s32 t_fine;
int ret;
ret = bmp280_get_t_fine(data, &t_fine);
@@ -476,17 +473,13 @@ static int bmp280_read_press(struct bmp280_data *data,
if (ret)
return ret;
- comp_press = bmp280_compensate_press(data, adc_press, t_fine);
-
- *val = comp_press;
- *val2 = 256000;
+ *comp_press = bmp280_compensate_press(data, adc_press, t_fine);
- return IIO_VAL_FRACTIONAL;
+ return 0;
}
-static int bme280_read_humid(struct bmp280_data *data, int *val, int *val2)
+static int bme280_read_humid(struct bmp280_data *data, u32 *comp_humidity)
{
- u32 comp_humidity;
u16 adc_humidity;
s32 t_fine;
int ret;
@@ -499,11 +492,9 @@ static int bme280_read_humid(struct bmp280_data *data, int *val, int *val2)
if (ret)
return ret;
- comp_humidity = bme280_compensate_humidity(data, adc_humidity, t_fine);
-
- *val = comp_humidity * 1000 / 1024;
+ *comp_humidity = bme280_compensate_humidity(data, adc_humidity, t_fine);
- return IIO_VAL_INT;
+ return 0;
}
static int bmp280_read_raw_impl(struct iio_dev *indio_dev,
@@ -511,6 +502,8 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev,
int *val, int *val2, long mask)
{
struct bmp280_data *data = iio_priv(indio_dev);
+ int chan_value;
+ int ret;
guard(mutex)(&data->lock);
@@ -518,11 +511,29 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_HUMIDITYRELATIVE:
- return data->chip_info->read_humid(data, val, val2);
+ ret = data->chip_info->read_humid(data, &chan_value);
+ if (ret)
+ return ret;
+
+ *val = data->chip_info->humid_coeffs[0] * chan_value;
+ *val2 = data->chip_info->humid_coeffs[1];
+ return data->chip_info->humid_coeffs_type;
case IIO_PRESSURE:
- return data->chip_info->read_press(data, val, val2);
+ ret = data->chip_info->read_press(data, &chan_value);
+ if (ret)
+ return ret;
+
+ *val = data->chip_info->press_coeffs[0] * chan_value;
+ *val2 = data->chip_info->press_coeffs[1];
+ return data->chip_info->press_coeffs_type;
case IIO_TEMP:
- return data->chip_info->read_temp(data, val, val2);
+ ret = data->chip_info->read_temp(data, &chan_value);
+ if (ret)
+ return ret;
+
+ *val = data->chip_info->temp_coeffs[0] * chan_value;
+ *val2 = data->chip_info->temp_coeffs[1];
+ return data->chip_info->temp_coeffs_type;
default:
return -EINVAL;
}
@@ -822,6 +833,8 @@ static int bmp280_chip_config(struct bmp280_data *data)
static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
static const u8 bmp280_chip_ids[] = { BMP280_CHIP_ID };
+static const int bmp280_temp_coeffs[] = { 10, 1 };
+static const int bmp280_press_coeffs[] = { 1, 256000 };
const struct bmp280_chip_info bmp280_chip_info = {
.id_reg = BMP280_REG_ID,
@@ -850,6 +863,11 @@ const struct bmp280_chip_info bmp280_chip_info = {
.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
.oversampling_press_default = BMP280_OSRS_PRESS_16X - 1,
+ .temp_coeffs = bmp280_temp_coeffs,
+ .temp_coeffs_type = IIO_VAL_FRACTIONAL,
+ .press_coeffs = bmp280_press_coeffs,
+ .press_coeffs_type = IIO_VAL_FRACTIONAL,
+
.chip_config = bmp280_chip_config,
.read_temp = bmp280_read_temp,
.read_press = bmp280_read_press,
@@ -877,6 +895,7 @@ static int bme280_chip_config(struct bmp280_data *data)
}
static const u8 bme280_chip_ids[] = { BME280_CHIP_ID };
+static const int bme280_humid_coeffs[] = { 1000, 1024 };
const struct bmp280_chip_info bme280_chip_info = {
.id_reg = BMP280_REG_ID,
@@ -899,6 +918,13 @@ const struct bmp280_chip_info bme280_chip_info = {
.num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail),
.oversampling_humid_default = BME280_OSRS_HUMIDITY_16X - 1,
+ .temp_coeffs = bmp280_temp_coeffs,
+ .temp_coeffs_type = IIO_VAL_FRACTIONAL,
+ .press_coeffs = bmp280_press_coeffs,
+ .press_coeffs_type = IIO_VAL_FRACTIONAL,
+ .humid_coeffs = bme280_humid_coeffs,
+ .humid_coeffs_type = IIO_VAL_FRACTIONAL,
+
.chip_config = bme280_chip_config,
.read_temp = bmp280_read_temp,
.read_press = bmp280_read_press,
@@ -1091,9 +1117,8 @@ static u32 bmp380_compensate_press(struct bmp280_data *data,
return comp_press;
}
-static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2)
+static int bmp380_read_temp(struct bmp280_data *data, s32 *comp_temp)
{
- s32 comp_temp;
u32 adc_temp;
int ret;
@@ -1101,15 +1126,14 @@ static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2)
if (ret)
return ret;
- comp_temp = bmp380_compensate_temp(data, adc_temp);
+ *comp_temp = bmp380_compensate_temp(data, adc_temp);
- *val = comp_temp * 10;
- return IIO_VAL_INT;
+ return 0;
}
-static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
+static int bmp380_read_press(struct bmp280_data *data, u32 *comp_press)
{
- u32 adc_press, comp_press, t_fine;
+ u32 adc_press, t_fine;
int ret;
ret = bmp380_get_t_fine(data, &t_fine);
@@ -1120,12 +1144,9 @@ static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
if (ret)
return ret;
- comp_press = bmp380_compensate_press(data, adc_press, t_fine);
-
- *val = comp_press;
- *val2 = 100000;
+ *comp_press = bmp380_compensate_press(data, adc_press, t_fine);
- return IIO_VAL_FRACTIONAL;
+ return 0;
}
static int bmp380_read_calib(struct bmp280_data *data)
@@ -1296,6 +1317,8 @@ static int bmp380_chip_config(struct bmp280_data *data)
static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 };
static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128};
static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID, BMP390_CHIP_ID };
+static const int bmp380_temp_coeffs[] = { 10, 1 };
+static const int bmp380_press_coeffs[] = { 1, 100000 };
const struct bmp280_chip_info bmp380_chip_info = {
.id_reg = BMP380_REG_ID,
@@ -1323,6 +1346,11 @@ const struct bmp280_chip_info bmp380_chip_info = {
.num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail),
.iir_filter_coeff_default = 2,
+ .temp_coeffs = bmp380_temp_coeffs,
+ .temp_coeffs_type = IIO_VAL_FRACTIONAL,
+ .press_coeffs = bmp380_press_coeffs,
+ .press_coeffs_type = IIO_VAL_FRACTIONAL,
+
.chip_config = bmp380_chip_config,
.read_temp = bmp380_read_temp,
.read_press = bmp380_read_press,
@@ -1443,9 +1471,9 @@ static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write)
* for what is expected on IIO ABI.
*/
-static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2)
+static int bmp580_read_temp(struct bmp280_data *data, s32 *raw_temp)
{
- s32 raw_temp;
+ s32 value_temp;
int ret;
ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf,
@@ -1455,25 +1483,19 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2)
return ret;
}
- raw_temp = get_unaligned_le24(data->buf);
- if (raw_temp == BMP580_TEMP_SKIPPED) {
+ value_temp = get_unaligned_le24(data->buf);
+ if (value_temp == BMP580_TEMP_SKIPPED) {
dev_err(data->dev, "reading temperature skipped\n");
return -EIO;
}
+ *raw_temp = sign_extend32(value_temp, 23);
- /*
- * Temperature is returned in Celsius degrees in fractional
- * form down 2^16. We rescale by x1000 to return millidegrees
- * Celsius to respect IIO ABI.
- */
- raw_temp = sign_extend32(raw_temp, 23);
- *val = ((s64)raw_temp * 1000) / (1 << 16);
- return IIO_VAL_INT;
+ return 0;
}
-static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2)
+static int bmp580_read_press(struct bmp280_data *data, u32 *raw_press)
{
- u32 raw_press;
+ u32 value_press;
int ret;
ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf,
@@ -1483,18 +1505,14 @@ static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2)
return ret;
}
- raw_press = get_unaligned_le24(data->buf);
- if (raw_press == BMP580_PRESS_SKIPPED) {
+ value_press = get_unaligned_le24(data->buf);
+ if (value_press == BMP580_PRESS_SKIPPED) {
dev_err(data->dev, "reading pressure skipped\n");
return -EIO;
}
- /*
- * Pressure is returned in Pascals in fractional form down 2^16.
- * We rescale /1000 to convert to kilopascal to respect IIO ABI.
- */
- *val = raw_press;
- *val2 = 64000; /* 2^6 * 1000 */
- return IIO_VAL_FRACTIONAL;
+ *raw_press = value_press;
+
+ return 0;
}
static const int bmp580_odr_table[][2] = {
@@ -1830,6 +1848,9 @@ static int bmp580_chip_config(struct bmp280_data *data)
static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 };
static const u8 bmp580_chip_ids[] = { BMP580_CHIP_ID, BMP580_CHIP_ID_ALT };
+/* Instead of { 1000, 16 } we do this, to avoid overflow issues */
+static const int bmp580_temp_coeffs[] = { 125, 13 };
+static const int bmp580_press_coeffs[] = { 1, 64000};
const struct bmp280_chip_info bmp580_chip_info = {
.id_reg = BMP580_REG_CHIP_ID,
@@ -1856,6 +1877,11 @@ const struct bmp280_chip_info bmp580_chip_info = {
.num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail),
.iir_filter_coeff_default = 2,
+ .temp_coeffs = bmp580_temp_coeffs,
+ .temp_coeffs_type = IIO_VAL_FRACTIONAL_LOG2,
+ .press_coeffs = bmp580_press_coeffs,
+ .press_coeffs_type = IIO_VAL_FRACTIONAL,
+
.chip_config = bmp580_chip_config,
.read_temp = bmp580_read_temp,
.read_press = bmp580_read_press,
@@ -2011,9 +2037,8 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, u32 adc_temp)
return (bmp180_calc_t_fine(data, adc_temp) + 8) / 16;
}
-static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2)
+static int bmp180_read_temp(struct bmp280_data *data, s32 *comp_temp)
{
- s32 comp_temp;
u32 adc_temp;
int ret;
@@ -2021,10 +2046,9 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2)
if (ret)
return ret;
- comp_temp = bmp180_compensate_temp(data, adc_temp);
+ *comp_temp = bmp180_compensate_temp(data, adc_temp);
- *val = comp_temp * 100;
- return IIO_VAL_INT;
+ return 0;
}
static int bmp180_read_press_adc(struct bmp280_data *data, u32 *adc_press)
@@ -2087,9 +2111,9 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, u32 adc_press,
return p + ((x1 + x2 + 3791) >> 4);
}
-static int bmp180_read_press(struct bmp280_data *data, int *val, int *val2)
+static int bmp180_read_press(struct bmp280_data *data, u32 *comp_press)
{
- u32 comp_press, adc_press;
+ u32 adc_press;
s32 t_fine;
int ret;
@@ -2101,12 +2125,9 @@ static int bmp180_read_press(struct bmp280_data *data, int *val, int *val2)
if (ret)
return ret;
- comp_press = bmp180_compensate_press(data, adc_press, t_fine);
-
- *val = comp_press;
- *val2 = 1000;
+ *comp_press = bmp180_compensate_press(data, adc_press, t_fine);
- return IIO_VAL_FRACTIONAL;
+ return 0;
}
static int bmp180_chip_config(struct bmp280_data *data)
@@ -2117,6 +2138,8 @@ static int bmp180_chip_config(struct bmp280_data *data)
static const int bmp180_oversampling_temp_avail[] = { 1 };
static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
static const u8 bmp180_chip_ids[] = { BMP180_CHIP_ID };
+static const int bmp180_temp_coeffs[] = { 100, 1 };
+static const int bmp180_press_coeffs[] = { 1, 1000 };
const struct bmp280_chip_info bmp180_chip_info = {
.id_reg = BMP280_REG_ID,
@@ -2137,6 +2160,11 @@ const struct bmp280_chip_info bmp180_chip_info = {
ARRAY_SIZE(bmp180_oversampling_press_avail),
.oversampling_press_default = BMP180_MEAS_PRESS_8X,
+ .temp_coeffs = bmp180_temp_coeffs,
+ .temp_coeffs_type = IIO_VAL_FRACTIONAL,
+ .press_coeffs = bmp180_press_coeffs,
+ .press_coeffs_type = IIO_VAL_FRACTIONAL,
+
.chip_config = bmp180_chip_config,
.read_temp = bmp180_read_temp,
.read_press = bmp180_read_press,
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index 7c30e4d523be..a3d2cd722760 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -446,10 +446,17 @@ struct bmp280_chip_info {
int num_sampling_freq_avail;
int sampling_freq_default;
+ const int *temp_coeffs;
+ const int temp_coeffs_type;
+ const int *press_coeffs;
+ const int press_coeffs_type;
+ const int *humid_coeffs;
+ const int humid_coeffs_type;
+
int (*chip_config)(struct bmp280_data *data);
- int (*read_temp)(struct bmp280_data *data, int *val, int *val2);
- int (*read_press)(struct bmp280_data *data, int *val, int *val2);
- int (*read_humid)(struct bmp280_data *data, int *val, int *val2);
+ int (*read_temp)(struct bmp280_data *data, s32 *adc_temp);
+ int (*read_press)(struct bmp280_data *data, u32 *adc_press);
+ int (*read_humid)(struct bmp280_data *data, u32 *adc_humidity);
int (*read_calib)(struct bmp280_data *data);
int (*preinit)(struct bmp280_data *data);
};
--
2.25.1
