Re: [PATCH v9 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 02 Jul 2024 22:12:34 +0800
Yasin Lee <yasin.lee.x@xxxxxxxxx> wrote:

> A SAR sensor from NanjingTianyihexin Electronics Ltd.
> 
> The device has the following entry points:
> 
> Usual frequency:
> - sampling_frequency
> 
> Instant reading of current values for different sensors:
> - in_proximity0_raw
> - in_proximity1_raw
> - in_proximity2_raw
> - in_proximity3_raw
> - in_proximity4_raw
> and associated events in events/
> 
> Signed-off-by: Yasin Lee <yasin.lee.x@xxxxxxxxx>

Hi Yasin, A few comments inline, but rather than waste time getting you to do
a v10, I've made the following modes. Please check them (it wouldn't be the first
time if I've messed something up with 'trivial' tidy up!)

With this change set applied to the testing branch of iio.git.
I'll be rebasing on 6.11-rc1 once available at which point this will be in the togreg
branch and picked up by linux-next.

Thanks,

Jonathan


diff --git a/drivers/iio/proximity/hx9023s.c b/drivers/iio/proximity/hx9023s.c
index e3f3fee2c94a..63e3b56d4f4c 100644
--- a/drivers/iio/proximity/hx9023s.c
+++ b/drivers/iio/proximity/hx9023s.c
@@ -312,16 +312,19 @@ static int hx9023s_interrupt_disable(struct hx9023s_data *data)
 static int hx9023s_data_lock(struct hx9023s_data *data, bool locked)
 {
 	if (locked)
-		return regmap_update_bits(data->regmap, HX9023S_DSP_CONFIG_CTRL1,
-					HX9023S_DATA_LOCK_MASK, HX9023S_DATA_LOCK_MASK);
+		return regmap_update_bits(data->regmap,
+					  HX9023S_DSP_CONFIG_CTRL1,
+					  HX9023S_DATA_LOCK_MASK,
+					  HX9023S_DATA_LOCK_MASK);
 	else
-		return regmap_update_bits(data->regmap, HX9023S_DSP_CONFIG_CTRL1,
-					HX9023S_DATA_LOCK_MASK, 0);
+		return regmap_update_bits(data->regmap,
+					  HX9023S_DSP_CONFIG_CTRL1,
+					  HX9023S_DATA_LOCK_MASK, 0);
 }
 
 static int hx9023s_ch_cfg(struct hx9023s_data *data)
 {
-	u8 reg_list[HX9023S_CH_NUM * 2];
+	__le16 reg_list[HX9023S_CH_NUM];
 	u8 ch_pos[HX9023S_CH_NUM];
 	u8 ch_neg[HX9023S_CH_NUM];
 	/* Bit positions corresponding to input pin connections */
@@ -336,10 +339,11 @@ static int hx9023s_ch_cfg(struct hx9023s_data *data)
 			HX9023S_NOT_CONNECTED : conn_cs[data->ch_data[i].channel_negative];
 
 		reg = (HX9023S_POS << ch_pos[i]) | (HX9023S_NEG << ch_neg[i]);
-		put_unaligned_le16(reg, &reg_list[i * 2]);
+		reg_list[i] = cpu_to_le16(reg);
 	}
 
-	return regmap_bulk_write(data->regmap, HX9023S_CH0_CFG_7_0, reg_list, HX9023S_CH_NUM * 2);
+	return regmap_bulk_write(data->regmap, HX9023S_CH0_CFG_7_0, reg_list,
+				 sizeof(reg_list));
 }
 
 static int hx9023s_write_far_debounce(struct hx9023s_data *data, int val)
@@ -387,17 +391,17 @@ static int hx9023s_read_near_debounce(struct hx9023s_data *data, int *val)
 static int hx9023s_get_thres_near(struct hx9023s_data *data, u8 ch, int *val)
 {
 	int ret;
-	u8 buf[2];
+	__le16 buf;
 	unsigned int reg, tmp;
 
 	reg = (ch == 4) ? HX9023S_PROX_HIGH_DIFF_CFG_CH4_0 :
 		HX9023S_PROX_HIGH_DIFF_CFG_CH0_0 + (ch * 2);
 
-	ret = regmap_bulk_read(data->regmap, reg, buf, sizeof(buf));
+	ret = regmap_bulk_read(data->regmap, reg, &buf, sizeof(buf));
 	if (ret)
 		return ret;
 
-	tmp = (get_unaligned_le16(buf) & GENMASK(9, 0)) * 32;
+	tmp = (le16_to_cpu(buf) & GENMASK(9, 0)) * 32;
 	data->ch_data[ch].thres.near = tmp;
 	*val = tmp;
 
@@ -407,17 +411,17 @@ static int hx9023s_get_thres_near(struct hx9023s_data *data, u8 ch, int *val)
 static int hx9023s_get_thres_far(struct hx9023s_data *data, u8 ch, int *val)
 {
 	int ret;
-	u8 buf[2];
+	__le16 buf;
 	unsigned int reg, tmp;
 
 	reg = (ch == 4) ? HX9023S_PROX_LOW_DIFF_CFG_CH4_0 :
 		HX9023S_PROX_LOW_DIFF_CFG_CH0_0 + (ch * 2);
 
-	ret = regmap_bulk_read(data->regmap, reg, buf, sizeof(buf));
+	ret = regmap_bulk_read(data->regmap, reg, &buf, sizeof(buf));
 	if (ret)
 		return ret;
 
-	tmp = (get_unaligned_le16(buf) & GENMASK(9, 0)) * 32;
+	tmp = (le16_to_cpu(buf) & GENMASK(9, 0)) * 32;
 	data->ch_data[ch].thres.far = tmp;
 	*val = tmp;
 
@@ -608,7 +612,9 @@ static int hx9023s_property_get(struct hx9023s_data *data)
 				data->ch_data[reg].channel_positive = array[0];
 				data->ch_data[reg].channel_negative = array[1];
 			} else {
-				return dev_err_probe(dev, ret, "Property read failed: %d\n", reg);
+				return dev_err_probe(dev, ret,
+						     "Property read failed: %d\n",
+						     reg);
 			}
 		}
 	}
@@ -670,7 +676,8 @@ static int hx9023s_get_samp_freq(struct hx9023s_data *data, int *val, int *val2)
 	return IIO_VAL_INT_PLUS_MICRO;
 }
 
-static int hx9023s_read_raw(struct iio_dev *indio_dev, const struct iio_chan_spec *chan,
+static int hx9023s_read_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan,
 			    int *val, int *val2, long mask)
 {
 	struct hx9023s_data *data = iio_priv(indio_dev);
@@ -714,7 +721,8 @@ static int hx9023s_set_samp_freq(struct hx9023s_data *data, int val, int val2)
 	return regmap_write(data->regmap, HX9023S_PRF_CFG, i);
 }
 
-static int hx9023s_write_raw(struct iio_dev *indio_dev, const struct iio_chan_spec *chan,
+static int hx9023s_write_raw(struct iio_dev *indio_dev,
+			     const struct iio_chan_spec *chan,
 			     int val, int val2, long mask)
 {
 	struct hx9023s_data *data = iio_priv(indio_dev);
@@ -759,10 +767,12 @@ static void hx9023s_push_events(struct iio_dev *indio_dev)
 	for_each_set_bit(chan, &prox_changed, HX9023S_CH_NUM) {
 		unsigned int dir;
 
-		dir = (data->prox_state_reg & BIT(chan)) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+		dir = (data->prox_state_reg & BIT(chan)) ?
+			IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
 
 		iio_push_event(indio_dev,
-			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan, IIO_EV_TYPE_THRESH, dir),
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
+						    IIO_EV_TYPE_THRESH, dir),
 			       timestamp);
 	}
 	data->chan_prox_stat = data->prox_state_reg;
@@ -869,7 +879,8 @@ static int hx9023s_write_event_config(struct iio_dev *indio_dev,
 
 	if (test_bit(chan->channel, &data->chan_in_use)) {
 		hx9023s_ch_en(data, chan->channel, !!state);
-		__assign_bit(chan->channel, &data->chan_event, data->ch_data[chan->channel].enable);
+		__assign_bit(chan->channel, &data->chan_event,
+			     data->ch_data[chan->channel].enable);
 	}
 
 	return 0;
@@ -930,7 +941,8 @@ static irqreturn_t hx9023s_trigger_handler(int irq, void *private)
 		data->buffer.channels[i++] = cpu_to_le16(data->ch_data[index].diff);
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, pf->timestamp);
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
+					   pf->timestamp);
 
 out:
 	iio_trigger_notify_done(indio_dev->trig);
@@ -992,7 +1004,7 @@ static int hx9023s_probe(struct i2c_client *client)
 	struct hx9023s_data *data;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(dev, sizeof(struct hx9023s_data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -1001,7 +1013,8 @@ static int hx9023s_probe(struct i2c_client *client)
 
 	data->regmap = devm_regmap_init_i2c(client, &hx9023s_regmap_config);
 	if (IS_ERR(data->regmap))
-		return dev_err_probe(dev, PTR_ERR(data->regmap), "regmap init failed\n");
+		return dev_err_probe(dev, PTR_ERR(data->regmap),
+				     "regmap init failed\n");
 
 	ret = hx9023s_property_get(data);
 	if (ret)
@@ -1036,17 +1049,20 @@ static int hx9023s_probe(struct i2c_client *client)
 		return dev_err_probe(dev, ret, "regcache sync failed\n");
 
 	if (client->irq) {
-		ret = devm_request_threaded_irq(dev, client->irq, hx9023s_irq_handler,
-						hx9023s_irq_thread_handler, IRQF_ONESHOT,
+		ret = devm_request_threaded_irq(dev, client->irq,
+						hx9023s_irq_handler,
+						hx9023s_irq_thread_handler,
+						IRQF_ONESHOT,
 						"hx9023s_event", indio_dev);
 		if (ret)
 			return dev_err_probe(dev, ret, "irq request failed\n");
 
-		data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
+		data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+						    indio_dev->name,
 						    iio_device_id(indio_dev));
 		if (!data->trig)
 			return dev_err_probe(dev, -ENOMEM,
-					"iio trigger alloc failed\n");
+					     "iio trigger alloc failed\n");
 
 		data->trig->ops = &hx9023s_trigger_ops;
 		iio_trigger_set_drvdata(data->trig, indio_dev);
@@ -1054,11 +1070,13 @@ static int hx9023s_probe(struct i2c_client *client)
 		ret = devm_iio_trigger_register(dev, data->trig);
 		if (ret)
 			return dev_err_probe(dev, ret,
-					"iio trigger register failed\n");
+					     "iio trigger register failed\n");
 	}
 
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, iio_pollfunc_store_time,
-					      hx9023s_trigger_handler, &hx9023s_buffer_setup_ops);
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      hx9023s_trigger_handler,
+					      &hx9023s_buffer_setup_ops);
 	if (ret)
 		return dev_err_probe(dev, ret,
 				"iio triggered buffer setup failed\n");
@@ -1087,7 +1105,8 @@ static int hx9023s_resume(struct device *dev)
 	return 0;
 }
 
-static DEFINE_SIMPLE_DEV_PM_OPS(hx9023s_pm_ops, hx9023s_suspend, hx9023s_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(hx9023s_pm_ops, hx9023s_suspend,
+				hx9023s_resume);
 
 static const struct of_device_id hx9023s_of_match[] = {
 	{ .compatible = "tyhx,hx9023s" },


> diff --git a/drivers/iio/proximity/hx9023s.c b/drivers/iio/proximity/hx9023s.c
> new file mode 100644
> index 000000000000..e3f3fee2c94a
> --- /dev/null
> +++ b/drivers/iio/proximity/hx9023s.c
> @@ -0,0 +1,1124 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2024 NanjingTianyihexin Electronics Ltd.
> + * http://www.tianyihexin.com
> + *
> + * Driver for NanjingTianyihexin HX9023S Cap Sensor.
> + * Datasheet available at:
> + * http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf
> + */


> +
> +static int hx9023s_ch_cfg(struct hx9023s_data *data)
> +{
> +	u8 reg_list[HX9023S_CH_NUM * 2];

Array of __le16 seems more appropriate.

> +	u8 ch_pos[HX9023S_CH_NUM];
> +	u8 ch_neg[HX9023S_CH_NUM];
> +	/* Bit positions corresponding to input pin connections */
> +	u8 conn_cs[HX9023S_CH_NUM] = { 0, 2, 4, 6, 8 };
> +	unsigned int i;
> +	u16 reg;
> +
> +	for (i = 0; i < HX9023S_CH_NUM; i++) {
> +		ch_pos[i] = data->ch_data[i].channel_positive == HX9023S_NOT_CONNECTED ?
> +			HX9023S_NOT_CONNECTED : conn_cs[data->ch_data[i].channel_positive];
> +		ch_neg[i] = data->ch_data[i].channel_negative == HX9023S_NOT_CONNECTED ?
> +			HX9023S_NOT_CONNECTED : conn_cs[data->ch_data[i].channel_negative];
> +
> +		reg = (HX9023S_POS << ch_pos[i]) | (HX9023S_NEG << ch_neg[i]);
> +		put_unaligned_le16(reg, &reg_list[i * 2]);
> +	}
> +
> +	return regmap_bulk_write(data->regmap, HX9023S_CH0_CFG_7_0, reg_list, HX9023S_CH_NUM * 2);
> +}

> +
> +static int hx9023s_get_thres_near(struct hx9023s_data *data, u8 ch, int *val)
> +{
> +	int ret;
> +	u8 buf[2];
> +	unsigned int reg, tmp;
> +
> +	reg = (ch == 4) ? HX9023S_PROX_HIGH_DIFF_CFG_CH4_0 :
> +		HX9023S_PROX_HIGH_DIFF_CFG_CH0_0 + (ch * 2);
> +
> +	ret = regmap_bulk_read(data->regmap, reg, buf, sizeof(buf));
> +	if (ret)
> +		return ret;
> +
> +	tmp = (get_unaligned_le16(buf) & GENMASK(9, 0)) * 32;
Same as below.

> +	data->ch_data[ch].thres.near = tmp;
> +	*val = tmp;
> +
> +	return IIO_VAL_INT;
> +}
> +
> +static int hx9023s_get_thres_far(struct hx9023s_data *data, u8 ch, int *val)
> +{
> +	int ret;
> +	u8 buf[2];

Why not use an __le16 here?

> +	unsigned int reg, tmp;
> +
> +	reg = (ch == 4) ? HX9023S_PROX_LOW_DIFF_CFG_CH4_0 :
> +		HX9023S_PROX_LOW_DIFF_CFG_CH0_0 + (ch * 2);
> +
> +	ret = regmap_bulk_read(data->regmap, reg, buf, sizeof(buf));
> +	if (ret)
> +		return ret;
> +
> +	tmp = (get_unaligned_le16(buf) & GENMASK(9, 0)) * 32;
then le16_to_cpu() here

> +	data->ch_data[ch].thres.far = tmp;
> +	*val = tmp;
> +
> +	return IIO_VAL_INT;
> +}



> +static int hx9023s_write_event_config(struct iio_dev *indio_dev,
> +				      const struct iio_chan_spec *chan,
> +				      enum iio_event_type type,
> +				      enum iio_event_direction dir,
> +				      int state)
> +{
> +	struct hx9023s_data *data = iio_priv(indio_dev);
> +
> +	if (test_bit(chan->channel, &data->chan_in_use)) {
> +		hx9023s_ch_en(data, chan->channel, !!state);
> +		__assign_bit(chan->channel, &data->chan_event, data->ch_data[chan->channel].enable);

very long line.

> +	}
> +
> +	return 0;
> +}


...

> +static int hx9023s_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct iio_dev *indio_dev;
> +	struct hx9023s_data *data;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(struct hx9023s_data));

sizeof(*data)

preferred as then I don't need to figure out if there is a match with

data = iio_priv(indio_dev)

below.

> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	mutex_init(&data->mutex);
> +
> +	data->regmap = devm_regmap_init_i2c(client, &hx9023s_regmap_config);
> +	if (IS_ERR(data->regmap))
> +		return dev_err_probe(dev, PTR_ERR(data->regmap), "regmap init failed\n");
> +
> +	ret = hx9023s_property_get(data);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "dts phase failed\n");
> +
> +	ret = devm_regulator_get_enable(dev, "vdd");
> +	if (ret)
> +		return dev_err_probe(dev, ret, "regulator get failed\n");
> +
> +	ret = hx9023s_id_check(indio_dev);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "id check failed\n");
> +
> +	indio_dev->name = "hx9023s";
> +	indio_dev->channels = hx9023s_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(hx9023s_channels);
> +	indio_dev->info = &hx9023s_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	i2c_set_clientdata(client, indio_dev);
> +
> +	ret = regmap_multi_reg_write(data->regmap, hx9023s_reg_init_list,
> +				     ARRAY_SIZE(hx9023s_reg_init_list));
> +	if (ret)
> +		return dev_err_probe(dev, ret, "device init failed\n");
> +
> +	ret = hx9023s_ch_cfg(data);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "channel config failed\n");
> +
> +	ret = regcache_sync(data->regmap);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "regcache sync failed\n");
> +
> +	if (client->irq) {
> +		ret = devm_request_threaded_irq(dev, client->irq, hx9023s_irq_handler,
> +						hx9023s_irq_thread_handler, IRQF_ONESHOT,
> +						"hx9023s_event", indio_dev);
> +		if (ret)
> +			return dev_err_probe(dev, ret, "irq request failed\n");
> +
> +		data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
> +						    iio_device_id(indio_dev));
> +		if (!data->trig)
> +			return dev_err_probe(dev, -ENOMEM,
> +					"iio trigger alloc failed\n");
> +
> +		data->trig->ops = &hx9023s_trigger_ops;
> +		iio_trigger_set_drvdata(data->trig, indio_dev);
> +
> +		ret = devm_iio_trigger_register(dev, data->trig);
> +		if (ret)
> +			return dev_err_probe(dev, ret,
> +					"iio trigger register failed\n");
> +	}
> +
> +	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, iio_pollfunc_store_time,
> +					      hx9023s_trigger_handler, &hx9023s_buffer_setup_ops);

Trivial but preferred wrap remains 80 chars unless there is a good reason
to go longer.

> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				"iio triggered buffer setup failed\n");
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux