[PATCH v6 3/6] iio: adc: ad7192: Update clock config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There are actually 4 configuration modes of clock source for AD719X
devices. Either a crystal can be attached externally between MCLK1 and
MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
pin. The other 2 modes make use of the 4.92MHz internal clock.

Removed properties adi,int-clock-output-enable and adi,clock-xtal were
undocumented. Use cleaner alternative of configuring external clock by
using clock names mclk and xtal.

Removed functionality of AD7192_CLK_INT_CO restored in complementary
patch.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx>
---
 drivers/iio/adc/ad7192.c | 56 ++++++++++++++++++++--------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 334ab90991d4..940517df5429 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -396,25 +396,37 @@ static inline bool ad7192_valid_external_frequency(u32 freq)
 		freq <= AD7192_EXT_FREQ_MHZ_MAX);
 }
 
-static int ad7192_clock_select(struct ad7192_state *st)
+static const char *const ad7192_clock_names[] = {
+	"xtal",
+	"mclk"
+};
+
+static int ad7192_clock_setup(struct ad7192_state *st)
 {
 	struct device *dev = &st->sd.spi->dev;
-	unsigned int clock_sel;
-
-	clock_sel = AD7192_CLK_INT;
+	int ret;
 
-	/* use internal clock */
-	if (!st->mclk) {
-		if (device_property_read_bool(dev, "adi,int-clock-output-enable"))
-			clock_sel = AD7192_CLK_INT_CO;
+	ret = device_property_match_property_string(dev, "clock-names",
+						    ad7192_clock_names,
+						    ARRAY_SIZE(ad7192_clock_names));
+	if (ret < 0) {
+		st->clock_sel = AD7192_CLK_INT;
+		st->fclk = AD7192_INT_FREQ_MHZ;
 	} else {
-		if (device_property_read_bool(dev, "adi,clock-xtal"))
-			clock_sel = AD7192_CLK_EXT_MCLK1_2;
-		else
-			clock_sel = AD7192_CLK_EXT_MCLK2;
+		st->clock_sel = AD7192_CLK_EXT_MCLK1_2 + ret;
+
+		st->mclk = devm_clk_get_enabled(dev, ad7192_clock_names[ret]);
+		if (IS_ERR(st->mclk))
+			return dev_err_probe(dev, PTR_ERR(st->mclk),
+					     "Failed to get mclk\n");
+
+		st->fclk = clk_get_rate(st->mclk);
+		if (!ad7192_valid_external_frequency(st->fclk))
+			return dev_err_probe(dev, -EINVAL,
+					     "External clock frequency out of bounds\n");
 	}
 
-	return clock_sel;
+	return 0;
 }
 
 static int ad7192_setup(struct iio_dev *indio_dev, struct device *dev)
@@ -1275,21 +1287,9 @@ static int ad7192_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	st->fclk = AD7192_INT_FREQ_MHZ;
-
-	st->mclk = devm_clk_get_optional_enabled(dev, "mclk");
-	if (IS_ERR(st->mclk))
-		return PTR_ERR(st->mclk);
-
-	st->clock_sel = ad7192_clock_select(st);
-
-	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
-	    st->clock_sel == AD7192_CLK_EXT_MCLK2) {
-		st->fclk = clk_get_rate(st->mclk);
-		if (!ad7192_valid_external_frequency(st->fclk))
-			return dev_err_probe(dev, -EINVAL,
-					     "External clock frequency out of bounds\n");
-	}
+	ret = ad7192_clock_setup(st);
+	if (ret)
+		return ret;
 
 	ret = ad7192_setup(indio_dev, dev);
 	if (ret)
-- 
2.34.1





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux