This series adds the following improvements over the current AD7606's driver implementation: - Fix wrong usage of gpio array - Fix standby that was documented as ACTIVE_LOW but handled in the driver as if it was ACTIVE_HIGH - Improve dt-bindings documentation - Switch mutex lock to scoped guard Signed-off-by: Guillaume Stols <gstols@xxxxxxxxxxxx> --- Changes in v3: - Remove the two first patches that were already picked up. - Add styling corrections. - [Patch 6/8] Improve commit message. - [Patch 8/8] Replace every scoped_guard by simple guard. - Link to v2: https://lore.kernel.org/r/20240628-cleanup-ad7606-v2-0-96e02f90256d@xxxxxxxxxxxx Changes in v2: - Change scoped guard to guard(mutex)(&st->lock). This was tested with Rob's bot condition, and seems not to generate warning anymore. - Reorder the commits for avoiding bisection issues and respect commit priority rules. - Add vdrive-supply to required properties. - Separate cosmetic changes from content ones in dt-binding descriptions. - Move maxItems changes (and plural in descriptions) to the commit that adds conditions. - Link to v1: https://lore.kernel.org/r/20240618-cleanup-ad7606-v1-0-f1854d5c779d@xxxxxxxxxxxx --- Guillaume Stols (8): dt-bindings: iio: adc: adi,ad7606: normalize textwidth dt-bindings: iio: adc: adi,ad7606: improve descriptions dt-bindings: iio: adc: adi,ad7606: add supply properties dt-bindings: iio: adc: adi,ad7606: fix example dt-bindings: iio: adc: adi,ad7606: add conditions iio: adc: ad7606: fix oversampling gpio array iio: adc: ad7606: fix standby gpio state to match the documentation iio: adc: ad7606: switch mutexes to scoped_guard .../devicetree/bindings/iio/adc/adi,ad7606.yaml | 123 ++++++++++++++++----- drivers/iio/adc/ad7606.c | 47 ++++---- drivers/iio/adc/ad7606_spi.c | 5 +- 3 files changed, 115 insertions(+), 60 deletions(-) --- base-commit: 340fa834ae229a952db04a57ed13fd5d35d75818 change-id: 20240416-cleanup-ad7606-161e2ed9818b Best regards, -- Guillaume Stols <gstols@xxxxxxxxxxxx>
