Linux IIO Development

• Thread Index

• Re: [PATCH 3/6] iio:pressure:ms5637: limit available sample frequencies
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/6] iio:pressure:ms5637: switch to probe_new
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v5] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v5] iio: accel: yamaha-yas530: Add DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 2/2] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• RE: [PATH v3 0/3] iio: adc: xilinx: use even more devres
  • From: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx>
• [PATCH] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• RE: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx>
• [PATCH -next] iio: chemical: pms7003: convert comma to semicolon
  • From: Zheng Yongjun <zhengyongjun3@xxxxxxxxxx>
• Re: [PATCH 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: as3935: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 6/7] iio: chemical: atlas: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 5/7] iio: lmp91000: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 4/7] iio: gp2ap020a00f: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 3/7] iio: adis_trigger: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 2/7] iio: fix devm_iio_trigger_alloc with parent.cocci
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 1/7] iio: set default trig->dev.parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] Input: cyapa - do not call input_device_enabled from power mode handler
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Input: cyapa - do not call input_device_enabled from power mode handler
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: cyapa - do not call input_device_enabled from power mode handler
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 1/2] iio: acpi_als: Add timestamp channel
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 2/2] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 0/2] iio: acpi_als: Add sotfware trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 1/2] iio: acpi_als: Add timestamp channel
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 0/2] iio: acpi_als: Add sotfware trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 7/7] iio: as3935: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 6/7] iio: chemical: atlas: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 5/7] iio: lmp91000: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/7] iio: fix devm_iio_trigger_alloc with parent.cocci
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 1/7] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 4/7] iio: gp2ap020a00f: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 3/7] iio: adis_trigger: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 0/7] iio: Set default trigger device parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 4/6] iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 3/6] iio:pressure:ms5637: limit available sample frequencies
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 5/6] iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 2/6] iio:pressure:ms5637: introduce hardware differentiation
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 1/6] iio:pressure:ms5637: switch to probe_new
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: st-sensors: Convert bindings to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: kernel bug tracker
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: kernel bug tracker
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• kernel bug tracker
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: ad5504: Fix setting power-down state
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: set default trig->dev.parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 03/10] dt-bindings:iio:adc:remove atmel, adc-res and atmel, adc-res-names
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings:i2c:i2c-gate: txt to yaml conversion
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• IIO Driver for TMP117 Temperature sensor
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• RE: [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: "Pop, Cristian" <Cristian.Pop@xxxxxxxxxx>
• [PATCH v3 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v3 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: (subset) [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: adc: ad7887: add binding doc for AD7887
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: yamaha-yas: Add DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: "lorenzo.bianconi@xxxxxxxxxx" <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH 1/3] iio: dummy: convert all simple allocation devm_ variants
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: dummy: convert all simple allocation devm_ variants
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] Documentation: HID: amd-sfh-hid editing & corrections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] Documentation: HID: intel-ish-hid editing & corrections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/8] Documentation: HID: hiddev editing & corrections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/5] iio: move 'modes' initialization to core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st-sensors: Convert bindings to YAML
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• Re: [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: add custom hinge sensor support
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 8/8] Documentation: HID: uhid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 7/8] Documentation: HID: hid-transport editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 6/8] Documentation: HID: hid-sensor editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 5/8] Documentation: HID: hidraw editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 4/8] Documentation: HID: intel-ish-hid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 3/8] Documentation: HID: hiddev editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 2/8] Documentation: HID: amd-sfh-hid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 1/8] Documentation: HID: hid-alps editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 0/8] Documentation: HID: edit/correct all files
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v10 15/15] arm64: dts: qrb5165-rb5: port thermal zone definitions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 14/15] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 13/15] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 12/15] thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 11/15] iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 10/15] iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 09/15] iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 07/15] iio: provide of_iio_channel_get_by_name() and devm_ version it
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 08/15] iio: adc: move vadc_map_pt from header to the source file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 06/15] iio: adc: qcom-spmi-adc5: use of_device_get_match_data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 04/15] iio: adc: qcom-vadc-common: use fixp_linear_interpolate
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 05/15] iio: adc: move qcom-vadc-common.h to include dir
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 03/15] iio: adc: qcom-vadc: move several adc5 functions to common file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 01/15] dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 02/15] fixp-arith: add a linear interpolation function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 4/5] iio: adc: ad7768-1: remove explicit modes initialization
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 5/5] iio: magnetometer: rm3100: remove explicit modes initialization
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 0/5] iio: move 'modes' initialization to core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 3/5] iio: remove modes init for INDIO_DIRECT_MODE only drivers (manual)
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 1/5] iio: core: initialize 'modes' to INDIO_DIRECT_MODE by default
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2] iio: core: split __iio_device_attr_init() to init only the attr object
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/3] iio: dummy: use devm_iio_triggered_buffer_setup() for buffer setup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3] iio: dummy: convert events to device-managed handlers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: dummy: convert all simple allocation devm_ variants
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2] Input: document inhibiting
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 7/7] Input: Add "inhibited" property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 1/7] Input: add input_device_enabled()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• RE: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 2/3] iio: hid-sensors: Add hinge sensor driver
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 1/3] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• add custom hinge sensor support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH] iio: st-sensors: Convert bindings to YAML
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] iio: sx9310: Off by one in sx9310_read_thresh()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PULL] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: magnetometer: bmc150: Add rudimentary regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/4] iio: magnetometer: bmc150: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 1/3 v3] iio: accel: bmc150-accel: Add DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: sx9310: Off by one in sx9310_read_thresh()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: gyro: mpu3050: Store timestamp in poll function
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH] iio: sx9310: Off by one in sx9310_read_thresh()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] iio: accel: yamaha-yas530: Add DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: gyro: mpu3050: Store timestamp in poll function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: mpu3050: Use devm_ to set up buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATH v3 0/3] iio: adc: xilinx: use even more devres
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATH v3 3/3] iio: adc: xilinx: use more devres helpers and remove remove()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATH v3 3/3] iio: adc: xilinx: use more devres helpers and remove remove()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 3/3] iio: adc: xilinx: use more devres helpers and remove remove()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 2/3] iio: adc: xilinx: use devm_krealloc() instead of kfree() + kcalloc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 1/3] iio: adc: xilinx: use helper variable for &pdev->dev
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 0/3] iio: adc: xilinx: use even more devres
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/3] iio: accel: bmc150: Get mount-matrix from ACPI
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: gyro: mpu3050: Store timestamp in poll function
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] iio: gyro: mpu3050: Use devm_ to set up buffer
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx>
• [PATCH 1/2 v4] iio: accel: yamaha-yas530: Add DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v4] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v2] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v3 22/27] iio:adc:ti-adc084s021 Tidy up endian types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio:trigger: Remove re-poll logic.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND] [PATCH 1/2] iio: adc: qcom-spmi-vadc: Use right ratiometric range for 8998,660,845
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] iio:core: Introduce unlocked version of iio_map_array_unregister()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] add support for LSM6DSOP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsmdsx: compact st_lsm6dsx_sensor_settings table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/10] iio: adc: at91_adc: cleanup DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOP
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support for LSM6DSOP
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/3 v3] iio: accel: bmc150-accel: Add rudimentary regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] iio:core: Introduce unlocked version of iio_map_array_unregister()
  • From: Lino Sanfilippo <LinoSanfilippo@xxxxxx>
• Re: [PATCH 6/9] ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings:iio:samsung,exynos-adc: drop missuse of io-channel-ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/46] dt-bindings:iio:health:ti,afe4403: txt to yaml binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings:iio:adc: convert adc.txt to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/9] ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: core: Consolidate iio_format_avail_{list,range}()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: accel: bmc150: Improve ACPI enumeration support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings:i2c:i2c-gate: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] dt-bindings:iio:adc: Convert generic ADC channel binding to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings:iio:imu:invensense,mpu6050: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/11] iio: adc: at91_adc: remove platform data
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 02/10] iio: adc: at91_adc: rework resolution selection
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] device: provide devm_krealloc_array()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: fix warnings about passing signed values to %u
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 06/10] dt-bindings:iio:adc:remove triggers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings:iio:qcom-spmi-vadc drop incorrect io-channel-ranges from example
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix demux update
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings:iio:adc:maxim,max1027: Pull out to separate binding doc.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 10/10] ARM: dts: at91: remove deprecated ADC properties
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/3 v3] iio: accel: bmc150-accel: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/11] iio: adc: at91_adc: remove platform data
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 09/10] ARM: dts: at91: at91sam9rl: fix ADC triggers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 0/3] dt-bindings: yaml conversion of i2c-gate and IIO users
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio:health:afe4404: Fix naming of tx supply to match dt-bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 08/10] ARM: dts: at91: sama5d3: use proper ADC compatible
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 07/10] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [RESEND PATCH 1/2] iio:core: Introduce unlocked version of iio_map_array_unregister()
  • From: Lino Sanfilippo <LinoSanfilippo@xxxxxx>
• Re: [PATCH 6/9] ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings:iio:qcom-spmi-vadc drop incorrect io-channel-ranges from example
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] iio:health:afe4403: Fix naming of tx supply to match dt-bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 05/10] iio: adc: at91_adc: rework trigger definition
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 1/3] iio: accel: bmc150: Improve ACPI enumeration support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 04/10] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings:iio:adc:remove atmel,adc-res and atmel,adc-res-names
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: <tomislav.denis@xxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 01/10] iio: adc: at91_adc: remove at91_adc_ids
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 00/10] dt-bindings: iio: conversion of consumer drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: accel: yamaha-yas53x: Add DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 00/10] iio: adc: at91_adc: cleanup DT bindings
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [RESEND PATCH 2/2] io:core: In iio_map_array_register() cleanup in case of error
  • From: Lino Sanfilippo <LinoSanfilippo@xxxxxx>
• [PATCH 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: <tomislav.denis@xxxxxxx>
• Re: [PATCH v2 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsmdsx: compact st_lsm6dsx_sensor_settings table
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: potentiometer: ad5272: Correct polarity of reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] hts221: add vdd power regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: accel: bmc150: Improve ACPI enumeration support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Make cb a required parameter of buffer-cb
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: ad7298: convert probe to device-managed functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/11] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/11] iio: adc: at91_adc: remove platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/46] dt-bindings:iio:health:ti,afe4404: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] iio:core: Introduce unlocked version of iio_map_array_unregister()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 01/11] iio: adc: at91_adc: remove platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/10] dt-bindings:iio:potentiostat:ti,lmp91000: txt to yaml conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 0/2] Add support for ADS131E0x ADC family
  • From: <tomislav.denis@xxxxxxx>
• [PATCH 1/2 v2] iio: accel: yamaha-yas53x: Add DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: iio: adc: ad7298: rework external ref setup & remove platform data
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 2/2] iio: adc: ad7298: check regulator for null in ad7298_get_ref_voltage()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: ad7298: convert probe to device-managed functions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: FW: iio: adc: ad7298: rework external ref setup & remove platform data
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 30/46] dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Karol Herbst <kherbst@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Edward Cree <ecree.xilinx@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Edward Cree <ecree.xilinx@xxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL V2] 2nd set of IIO fixes for 5.9
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH AUTOSEL 5.9 06/33] HID: hid-sensor-hub: Fix issue with devices with no report ID
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 06/23] HID: hid-sensor-hub: Fix issue with devices with no report ID
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 3/8] HID: hid-sensor-hub: Fix issue with devices with no report ID
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/10] HID: hid-sensor-hub: Fix issue with devices with no report ID
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 03/12] HID: hid-sensor-hub: Fix issue with devices with no report ID
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 04/15] HID: hid-sensor-hub: Fix issue with devices with no report ID
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: fake ACPI IDs in the drivers
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 1/5] counter: Internalize sysfs interface code
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: fake ACPI IDs in the drivers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: fake ACPI IDs in the drivers
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: fake ACPI IDs in the drivers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: fake ACPI IDs in the drivers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: fake ACPI IDs in the drivers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: accel: bmc150: Get mount-matrix from ACPI
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• fake ACPI IDs in the drivers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/3] iio: accel: bmc150: Get mount-matrix from ACPI
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: accel: bmc150: Get mount-matrix from ACPI
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] iio: accel: bmc150: Improve ACPI enumeration support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: accel: bmc150: Improve ACPI enumeration support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Sean Young <sean@xxxxxxxx>
• [PATCH] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/1] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/3] iio: accel: bmc150: Get mount-matrix from ACPI
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/3] iio: accel: bmc150: Improve ACPI enumeration support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH v2 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH v3] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PULL] First set of new device support, cleanups and yaml conversions for the 5.11 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• [PATCH 1/1] iio: potentiometer: ad5272: Correct polarity of reset
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/46] dt-bindings:iio:potentiometer:adi,ad5272 yaml conversion
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 090/141] iio: adc: cpcap: Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PULL] First set of new device support, cleanups and yaml conversions for the 5.11 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 31/46] dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH 2/2] iio: cros_ec: un-indent block that configures motion sensor fifo
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/2] iio: cros_ec: do an early exit if not physical_device case
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 1/2] ASoC: stm32: dfsdm: add stm32_adfsdm_dummy_cb() callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 06/12] iio: buffer: re-route scan_elements via it's kobj_type
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [RFC PATCH 11/12] iio: buffer: introduce support for attaching more IIO buffers
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [Intel-wired-lan] [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [RFC PATCH 00/12] iio: core,buffer: add support for multiple IIO buffers per IIO device
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [RFC PATCH 12/12] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [RFC PATCH 03/12] iio: buffer: rework buffer & scan_elements dir creation
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC PATCH 01/12] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 1/4] device: provide devm_krealloc_array()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: <Nicolas.Ferre@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: buffer: Return error if no callback is given
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH 31/46] dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• [PATCH v6 3/5] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v6 2/5] docs: counter: Update to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v6 4/5] docs: counter: Document character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v6 5/5] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v6 0/5] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/46] dt-bindings:iio: yet more txt to yam conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 42/46] dt-bindings:iio:accel:fsl,mma8452: txt to yaml conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 40/46] dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 39/46] dt-bindings:iio:dac:ad5755: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 38/46] dt-bindings:iio:dac:ad5592r: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 36/46] dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 34/46] dt-bindings:iio:adc:ti,palmas-gpadc: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 31/46] dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 29/46] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 28/46] dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 21/46] dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 16/46] dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/46] dt-bindings:iio:health:ti,afe4403: txt to yaml binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/46] dt-bindings:iio:health:maxim,max30102: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/46] dt-bindings:iio:health:maxim,max30100: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/46] dt-bindings:iio:health:maxim,max30100: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/46] dt-bindings:iio:samsung,sensorhub-rinato: yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/46] dt-bindings:iio:potentiometer:adi,ad5272 yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Make cb a required parameter of buffer-cb
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 1/2] iio: humidity: hts221: add vdd voltage regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 0/2] hts221: add vdd power regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: hid-sensor-trigger: Decrement runtime pm enable count on driver removal
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• [PATCH v3] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RFC PATCH 00/12] iio: core,buffer: add support for multiple IIO buffers per IIO device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 12/12] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [RFC PATCH 11/12] iio: buffer: introduce support for attaching more IIO buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RFC PATCH 06/12] iio: buffer: re-route scan_elements via it's kobj_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 04/12] iio: buffer: add index to the first IIO buffer dir and symlink it back
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 03/12] iio: buffer: rework buffer & scan_elements dir creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 01/12] iio: core: register chardev only if needed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: hid-sensor-trigger: Use iio->trig instead trig field internal structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: hid-sensor-trigger: Decrement runtime pm enable count on driver removal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: core: return -EINVAL when no ioctl handler has been run
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3 v3] iio: accel: bmc150-accel: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: imu: st_lsm6dsx: fix edge-trigger interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] counter: microchip-tcb-capture: Fix CMR value check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: buffer: Return error if no callback is given
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 0/2] Make cb a required parameter of buffer-cb
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 1/2] ASoC: stm32: dfsdm: add stm32_adfsdm_dummy_cb() callback
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: hrtimer-trigger: Mark hrtimer to expire in hard interrupt context
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: yamaha-yas: Add DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: humidity: hts221: add vdd voltage regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: adis16209: remove unneeded spi_set_drvdata()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: adc: ad7887: add binding doc for AD7887
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: adis16201: remove unneeded spi_set_drvdata()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7292: remove unneeded spi_set_drvdata()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] HID: mcp2221: add ADC support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 090/141] iio: adc: cpcap: Fix fall-through warnings for Clang
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/9] iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/9] iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] HID: mcp2221: add ADC support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v9 12/15] thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH 090/141] iio: adc: cpcap: Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH v2] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7292: remove unneeded spi_set_drvdata()
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC support
  • From: rishi gupta <gupt21@xxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH] HID: mcp2221: add ADC support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v9 12/15] thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [External] Using IIO to export laptop palm-sensor and lap-mode info to userspace?
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] iio: adc: ad7292: remove unneeded spi_set_drvdata()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: accel: adis16209: remove unneeded spi_set_drvdata()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: accel: adis16201: remove unneeded spi_set_drvdata()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v2 3/4] iio: adc: ad7887: add OF match table
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: adc: ad7887: add binding doc for AD7887
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/4] iio: hid-sensor-trigger: Use iio->trig instead trig field internal structure
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v2 2/4] iio: hid-sensor-trigger: Decrement runtime pm enable count on driver removal
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v2 1/4] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/4] iio: adc: ad7887: remove matching code from driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 0/4] add custom hinge sensor support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: humidity: hts221: add vdd voltage regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] hts221: add vdd power regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 4/4] iio: hid-sensors: Add hinge sensor driver
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 3/4] iio: hid-sensor-trigger: Use iio->trig instead trig field internal structure
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 2/4] iio: hid-sensor-trigger: Decrement runtime pm enable count on driver removal
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 1/4] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 0/4] add custom hinge sensor support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v3 7/9] iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 8/9] arm64: dts: exynos: Drop incorrect use of io-channel-ranges property.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 7/9] ARM: dts: s5pv210-aries: Drop unneeded io-channel-ranges property.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/9] ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/9] ARM: dts: exynos: Drop incorrect use of io-channel-ranges
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC PATCH 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 0/2] st_lsm6dsx: add vdd-vddio power regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [RFC PATCH 06/12] iio: buffer: re-route scan_elements via it's kobj_type
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 10/12] iio: core: wrap iio device & buffer into struct for character devices
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 12/12] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 05/12] iio: core: split __iio_device_attr_init() to init only the attr object
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 07/12] iio: buffer: re-route core buffer attributes via it's new kobj_type
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 01/12] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 11/12] iio: buffer: introduce support for attaching more IIO buffers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 09/12] iio: re-route all buffer attributes through new buffer kobj_type
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 08/12] iio: buffer: add helper to get the IIO device to which a buffer belongs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 02/12] iio: buffer: add back-ref from iio_buffer to iio_dev
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 04/12] iio: buffer: add index to the first IIO buffer dir and symlink it back
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 03/12] iio: buffer: rework buffer & scan_elements dir creation
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 00/12] iio: core,buffer: add support for multiple IIO buffers per IIO device
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] st_lsm6dsx: add vdd-vddio power regulator
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v2 06/11] dt-bindings:iio:adc:remove triggers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 07/11] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 08/11] iio: adc: at91_adc: remove forward declaration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 10/11] ARM: dts: at91: at91sam9rl: fix ADC triggers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 11/11] ARM: dts: at91: remove deprecated ADC properties
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 09/11] ARM: dts: at91: sama5d3: use proper ADC compatible
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 03/11] dt-bindings:iio:adc:remove atmel,adc-res and atmel,adc-res-names
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 04/11] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 05/11] iio: adc: at91_adc: rework trigger definition
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 02/11] iio: adc: at91_adc: rework resolution selection
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 01/11] iio: adc: at91_adc: remove platform data
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: hrtimer-trigger: Mark hrtimer to expire in hard interrupt context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Counter device Interface for reading out input capture
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2] iio: accel: yamaha-yas: Add DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: adc: ad7887: add binding doc for AD7887
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: Counter device Interface for reading out input capture
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 2/2] iio: sysfs-trigger: Mark irq_work to expire in hardirq context
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 1/2] iio: hrtimer-trigger: Mark hrtimer to expire in hard interrupt context
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: core: organize buffer file-ops in the order defined in the struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PULL] First set of IIO and counter fixes for the 5.10 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings:iio:samsung,exynos-adc: drop missuse of io-channel-ranges
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] iio: core: return -EINVAL when no ioctl handler has been run
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: adc: ad7887: add binding doc for AD7887
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: adc: ad7887: convert dual-channel mode to DT/ACPI
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>