[PATCH v3 RESEND] Added AMS tsl2591 driver implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Driver implementation for AMS/TAOS tsl2591 ambient light sensor.

This driver supports configuration via device tree and sysfs.
Supported channels for raw infrared light, raw visible light,
raw combined light and combined lux value.
The driver additionally supports iio events on lower and
upper thresholds.

This is a very-high sensitivity light-to-digital converter that
transforms light intensity into a digital signal.

Datasheet Available at: https://ams.com/tsl25911

Signed-off-by: Joe Sandom <joe.g.sandom@xxxxxxxxx>
---
Changes in v3:
- Cleaned up descriptions in binding file and Kconfig
- Changed macros to be uppercase
- Cleaned up comment formatting for capitalisation and block comments
- Changed tsl2591_settings to tsl2591_als_settings as settings only
  related to als
- Return -EINVAL directly in default case to save some lines
- Consistent use of const in "compatible" check functions
- Removed mutex use in _show functions as not necessary
- Removed print's which contribute little value/have little meaning

NOTES;
- Where spaces are seen at the end of some lines, it looks like gmail
  has mangled things slightly.
- checkpatch.pl --strict remarks that mutex definition should have a
  comment above it. I agree it has little meaning, but just added it to
  satisfy checkpatch.pl :)
- For sysfs functions e.g. "in_illuminance_*", they're not currently
  prefixed with "tsl2591" because I wanted to keep things consistent
  with the other light drivers. Is this something we're looking to
  change with the other drivers too?

REASON FOR RESEND;
- Mailing lists were rejecting my outlook email, so switched to gmail as
  mailing lists seem to accept without issues.

 .../bindings/iio/light/amstaos,tsl2591.yaml   |   50 +
 drivers/iio/light/Kconfig                     |   11 +
 drivers/iio/light/Makefile                    |    1 +
 drivers/iio/light/tsl2591.c                   | 1220 +++++++++++++++++
 4 files changed, 1282 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
 create mode 100644 drivers/iio/light/tsl2591.c

diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
new file mode 100644
index 000000000000..29a53e0019dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2591.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS TSL2591 Ambient Light Sensor (ALS)
+
+maintainers:
+  - Joe Sandom <joe.g.sandom@xxxxxxxxx>
+
+description: |
+  AMS/TAOS TSL2591 is a very-high sensitivity
+  light-to-digital converter that transforms light intensity into a digital
+  signal.
+
+properties:
+  compatible:
+    const: amstaos,tsl2591
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      Interrupt (INT:Pin 2) Active low. Should be set to IRQ_TYPE_EDGE_FALLING.
+      interrupt is used to detect if the light intensity has fallen below
+      or reached above the configured threshold values.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tsl2591@29 {
+            compatible = "amstaos,tsl2591";
+            reg = <0x29>;
+            interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+       };
+    };
+...
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 33ad4dd0b5c7..07550f1a1783 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -501,6 +501,17 @@ config TSL2583
 	  Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
 	  Access ALS data via iio, sysfs.
 
+config TSL2591
+        tristate "TAOS TSL2591 ambient light sensor"
+        depends on I2C
+        help
+          Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor,
+          featuring channels for combined visible + IR intensity and lux illuminance.
+          Access als data via iio and sysfs. Supports iio_events.
+
+          To compile this driver as a module, select M: the
+          module will be called tsl2591.
+
 config TSL2772
 	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index ea376deaca54..d10912faf964 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_ST_UVIS25_SPI)	+= st_uvis25_spi.o
 obj-$(CONFIG_TCS3414)		+= tcs3414.o
 obj-$(CONFIG_TCS3472)		+= tcs3472.o
 obj-$(CONFIG_TSL2583)		+= tsl2583.o
+obj-$(CONFIG_TSL2591)		+= tsl2591.o
 obj-$(CONFIG_TSL2772)		+= tsl2772.o
 obj-$(CONFIG_TSL4531)		+= tsl4531.o
 obj-$(CONFIG_US5182D)		+= us5182d.o
diff --git a/drivers/iio/light/tsl2591.c b/drivers/iio/light/tsl2591.c
new file mode 100644
index 000000000000..fafa1f11c1f9
--- /dev/null
+++ b/drivers/iio/light/tsl2591.c
@@ -0,0 +1,1220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Joe Sandom <joe.g.sandom@xxxxxxxxx>
+ *
+ * Datasheet available at: https://ams.com/tsl25911
+ *
+ * Device driver for the TAOS TSL2591. This is a very-high sensitivity
+ * light-to-digital converter that transforms light intensity into a digital
+ * signal.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* ALS integration time conversion macros */
+#define ALS_TIME_SECS_TO_MS(x) (((x) + 1) * 100)
+#define ALS_TIME_MS_TO_SECS(x) (((x) / 100) - 1)
+
+/* TSL2591 register set */
+#define TSL2591_ENABLE      0x00
+#define TSL2591_CONTROL     0x01
+#define TSL2591_AILTL       0x04
+#define TSL2591_AILTH       0x05
+#define TSL2591_AIHTL       0x06
+#define TSL2591_AIHTH       0x07
+#define TSL2591_NP_AILTL    0x08
+#define TSL2591_NP_AILTH    0x09
+#define TSL2591_NP_AIHTL    0x0A
+#define TSL2591_NP_AIHTH    0x0B
+#define TSL2591_PERSIST     0x0C
+#define TSL2591_PACKAGE_ID  0x11
+#define TSL2591_DEVICE_ID   0x12
+#define TSL2591_STATUS      0x13
+#define TSL2591_C0_DATAL    0x14
+#define TSL2591_C0_DATAH    0x15
+#define TSL2591_C1_DATAL    0x16
+#define TSL2591_C1_DATAH    0x17
+
+/* TSL2591 command register definitions */
+#define TSL2591_CMD_NOP             0xA0
+#define TSL2591_CMD_SF_INTSET       0xE4
+#define TSL2591_CMD_SF_CALS_I       0xE5
+#define TSL2591_CMD_SF_CALS_NPI     0xE7
+#define TSL2591_CMD_SF_CNP_ALSI     0xEA
+
+/* TSL2591 enable register definitions */
+#define TSL2591_PWR_ON              0x01
+#define TSL2591_PWR_OFF             0x00
+#define TSL2591_ENABLE_ALS          0x02
+#define TSL2591_ENABLE_ALS_INT      0x10
+#define TSL2591_ENABLE_SLEEP_INT    0x40
+#define TSL2591_ENABLE_NP_INT       0x80
+
+/* TSL2591 control register definitions */
+#define TSL2591_CTRL_ALS_INTEGRATION_100MS  0x00
+#define TSL2591_CTRL_ALS_INTEGRATION_200MS  0x01
+#define TSL2591_CTRL_ALS_INTEGRATION_300MS  0x02
+#define TSL2591_CTRL_ALS_INTEGRATION_400MS  0x03
+#define TSL2591_CTRL_ALS_INTEGRATION_500MS  0x04
+#define TSL2591_CTRL_ALS_INTEGRATION_600MS  0x05
+#define TSL2591_CTRL_ALS_LOW_GAIN           0x00
+#define TSL2591_CTRL_ALS_MED_GAIN           0x10
+#define TSL2591_CTRL_ALS_HIGH_GAIN          0x20
+#define TSL2591_CTRL_ALS_MAX_GAIN           0x30
+#define TSL2591_CTRL_SYS_RESET              0x80
+
+/* TSL2591 persist register definitions */
+#define TSL2591_PRST_ALS_INT_CYCLE_0        0x00
+#define TSL2591_PRST_ALS_INT_CYCLE_ANY      0x01
+#define TSL2591_PRST_ALS_INT_CYCLE_2        0x02
+#define TSL2591_PRST_ALS_INT_CYCLE_3        0x03
+#define TSL2591_PRST_ALS_INT_CYCLE_5        0x04
+#define TSL2591_PRST_ALS_INT_CYCLE_10       0x05
+#define TSL2591_PRST_ALS_INT_CYCLE_15       0x06
+#define TSL2591_PRST_ALS_INT_CYCLE_20       0x07
+#define TSL2591_PRST_ALS_INT_CYCLE_25       0x08
+#define TSL2591_PRST_ALS_INT_CYCLE_30       0x09
+#define TSL2591_PRST_ALS_INT_CYCLE_35       0x0A
+#define TSL2591_PRST_ALS_INT_CYCLE_40       0x0B
+#define TSL2591_PRST_ALS_INT_CYCLE_45       0x0C
+#define TSL2591_PRST_ALS_INT_CYCLE_50       0x0D
+#define TSL2591_PRST_ALS_INT_CYCLE_55       0x0E
+#define TSL2591_PRST_ALS_INT_CYCLE_60       0x0F
+#define TSL2591_PRST_ALS_INT_CYCLE_MAX      TSL2591_PRST_ALS_INT_CYCLE_60
+
+/* TSL2591 persist interrupt cycle literals */
+#define TSL2591_PRST_ALS_INT_CYCLE_1_LIT      1
+#define TSL2591_PRST_ALS_INT_CYCLE_2_LIT      2
+#define TSL2591_PRST_ALS_INT_CYCLE_3_LIT      3
+#define TSL2591_PRST_ALS_INT_CYCLE_5_LIT      5
+#define TSL2591_PRST_ALS_INT_CYCLE_10_LIT     10
+#define TSL2591_PRST_ALS_INT_CYCLE_15_LIT     15
+#define TSL2591_PRST_ALS_INT_CYCLE_20_LIT     20
+#define TSL2591_PRST_ALS_INT_CYCLE_25_LIT     25
+#define TSL2591_PRST_ALS_INT_CYCLE_30_LIT     30
+#define TSL2591_PRST_ALS_INT_CYCLE_35_LIT     35
+#define TSL2591_PRST_ALS_INT_CYCLE_40_LIT     40
+#define TSL2591_PRST_ALS_INT_CYCLE_45_LIT     45
+#define TSL2591_PRST_ALS_INT_CYCLE_50_LIT     50
+#define TSL2591_PRST_ALS_INT_CYCLE_55_LIT     55
+#define TSL2591_PRST_ALS_INT_CYCLE_60_LIT     60
+
+/* TSL2591 PID register mask */
+#define TSL2591_PACKAGE_ID_MASK 0x30
+
+/* TSL2591 ID register mask */
+#define TSL2591_DEVICE_ID_MASK  0xFF
+
+/* TSL2591 status register masks */
+#define TSL2591_STS_ALS_VALID_MASK   0x01
+#define TSL2591_STS_ALS_INT_MASK     0x10
+#define TSL2591_STS_NPERS_INT_MASK   0x20
+#define TSL2591_STS_VAL_HIGH_MASK    0x01
+
+/* TSL2591 constant values */
+#define TSL2591_PACKAGE_ID_VAL  0x00
+#define TSL2591_DEVICE_ID_VAL   0x50
+
+/* Power off suspend delay time MS */
+#define TSL2591_POWER_OFF_DELAY_MS	2000
+
+/* TSL2591 default values */
+#define TSL2591_DEFAULT_ALS_INT_TIME          TSL2591_CTRL_ALS_INTEGRATION_300MS
+#define TSL2591_DEFAULT_ALS_GAIN              TSL2591_CTRL_ALS_MED_GAIN
+#define TSL2591_DEFAULT_ALS_PERSIST           TSL2591_PRST_ALS_INT_CYCLE_ANY
+#define TSL2591_DEFAULT_ALS_LOWER_THRESHOLD   100
+#define TSL2591_DEFAULT_ALS_UPPER_THRESHOLD   1500
+
+/* TSL2591 number of data channels */
+#define TSL2591_NUM_DATA_CHANNELS      4
+
+/* TSL2591 number of valid status reads on ADC complete */
+#define TSL2591_ALS_STS_VALID_COUNT    10
+
+/* TSL2591 maximum values */
+#define TSL2591_MAX_ALS_INT_TIME_MS    600
+#define TSL2591_ALS_MAX_VALUE	       65535
+
+/*
+ * LUX calculations;
+ * AGAIN values from Adafruits TSL2591 Arduino library
+ * https://github.com/adafruit/Adafruit_TSL2591_Library
+ */
+#define TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER   1
+#define TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER   25
+#define TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER  428
+#define TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER   9876
+#define TSL2591_LUX_COEFFICIENT      408
+
+static const u8 tsl2591_data_channels[] = {
+	TSL2591_C0_DATAL,
+	TSL2591_C0_DATAH,
+	TSL2591_C1_DATAL,
+	TSL2591_C1_DATAH,
+};
+
+struct tsl2591_als_readings {
+	u16 als_ch0;
+	u16 als_ch1;
+	u16 als_lux_int;
+	u16 als_lux_decimal;
+};
+
+struct tsl2591_als_settings {
+	u8 als_int_time;
+	u8 als_gain;
+	u8 als_persist;
+	u16 als_lower_threshold;
+	u16 als_upper_threshold;
+};
+
+struct tsl2591_chip {
+	/* ALS mutex */
+	struct mutex als_mutex;
+	struct i2c_client *client;
+	struct tsl2591_als_settings als_settings;
+	struct tsl2591_als_readings als_readings;
+
+	bool events_enabled;
+};
+
+/*
+ * Period table is ALS persist cycle x integration time setting
+ * Integration times: 100ms, 200ms, 300ms, 400ms, 500ms, 600ms
+ * ALS cycles: 1, 2, 3, 5, 10, 20, 25, 30, 35, 40, 45, 50, 55, 60
+ */
+static const char * const tsl2591_als_period_list[] = {
+	"0.1 0.2 0.3 0.5 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 ",
+	"0.2 0.4 0.6 1.0 2.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0",
+	"0.3 0.6 0.9 1.5 3.0 6.0 7.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0",
+	"0.4 0.8 1.2 2.0 4.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 ",
+	"0.5 1.0 1.5 2.5 5.0 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0",
+	"0.6 1.2 1.8 3.0 6.0 12.0 15.0 18.0 21.0 24.0 27.0 30.0 33.0 36.0",
+};
+
+static int tsl2591_gain_to_multiplier(const u8 als_gain)
+{
+	switch (als_gain) {
+	case TSL2591_CTRL_ALS_LOW_GAIN:
+		return TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER;
+	case TSL2591_CTRL_ALS_MED_GAIN:
+		return TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER;
+	case TSL2591_CTRL_ALS_HIGH_GAIN:
+		return TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER;
+	case TSL2591_CTRL_ALS_MAX_GAIN:
+		return TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER;
+	default:
+		return -EINVAL;
+	}
+}
+
+static u8 tsl2591_multiplier_to_gain(const u32 multiplier)
+{
+	switch (multiplier) {
+	case TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER:
+		return TSL2591_CTRL_ALS_LOW_GAIN;
+	case TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER:
+		return TSL2591_CTRL_ALS_MED_GAIN;
+	case TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER:
+		return TSL2591_CTRL_ALS_HIGH_GAIN;
+	case TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER:
+		return TSL2591_CTRL_ALS_MAX_GAIN;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl2591_persist_cycle_to_lit(const u8 als_persist)
+{
+	switch (als_persist) {
+	case TSL2591_PRST_ALS_INT_CYCLE_ANY:
+		return TSL2591_PRST_ALS_INT_CYCLE_1_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_2:
+		return TSL2591_PRST_ALS_INT_CYCLE_2_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_3:
+		return TSL2591_PRST_ALS_INT_CYCLE_3_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_5:
+		return TSL2591_PRST_ALS_INT_CYCLE_5_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_10:
+		return TSL2591_PRST_ALS_INT_CYCLE_10_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_15:
+		return TSL2591_PRST_ALS_INT_CYCLE_15_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_20:
+		return TSL2591_PRST_ALS_INT_CYCLE_20_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_25:
+		return TSL2591_PRST_ALS_INT_CYCLE_25_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_30:
+		return TSL2591_PRST_ALS_INT_CYCLE_30_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_35:
+		return TSL2591_PRST_ALS_INT_CYCLE_35_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_40:
+		return TSL2591_PRST_ALS_INT_CYCLE_40_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_45:
+		return TSL2591_PRST_ALS_INT_CYCLE_45_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_50:
+		return TSL2591_PRST_ALS_INT_CYCLE_50_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_55:
+		return TSL2591_PRST_ALS_INT_CYCLE_55_LIT;
+	case TSL2591_PRST_ALS_INT_CYCLE_60:
+		return TSL2591_PRST_ALS_INT_CYCLE_60_LIT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl2591_persist_lit_to_cycle(const u8 als_persist)
+{
+	switch (als_persist) {
+	case TSL2591_PRST_ALS_INT_CYCLE_1_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_ANY;
+	case TSL2591_PRST_ALS_INT_CYCLE_2_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_2;
+	case TSL2591_PRST_ALS_INT_CYCLE_3_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_3;
+	case TSL2591_PRST_ALS_INT_CYCLE_5_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_5;
+	case TSL2591_PRST_ALS_INT_CYCLE_10_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_10;
+	case TSL2591_PRST_ALS_INT_CYCLE_15_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_15;
+	case TSL2591_PRST_ALS_INT_CYCLE_20_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_20;
+	case TSL2591_PRST_ALS_INT_CYCLE_25_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_25;
+	case TSL2591_PRST_ALS_INT_CYCLE_30_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_30;
+	case TSL2591_PRST_ALS_INT_CYCLE_35_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_35;
+	case TSL2591_PRST_ALS_INT_CYCLE_40_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_40;
+	case TSL2591_PRST_ALS_INT_CYCLE_45_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_45;
+	case TSL2591_PRST_ALS_INT_CYCLE_50_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_50;
+	case TSL2591_PRST_ALS_INT_CYCLE_55_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_55;
+	case TSL2591_PRST_ALS_INT_CYCLE_60_LIT:
+		return TSL2591_PRST_ALS_INT_CYCLE_60;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl2591_compatible_int_time(struct tsl2591_chip *chip,
+				       const u32 als_integration_time)
+{
+	switch (als_integration_time) {
+	case TSL2591_CTRL_ALS_INTEGRATION_100MS:
+	case TSL2591_CTRL_ALS_INTEGRATION_200MS:
+	case TSL2591_CTRL_ALS_INTEGRATION_300MS:
+	case TSL2591_CTRL_ALS_INTEGRATION_400MS:
+	case TSL2591_CTRL_ALS_INTEGRATION_500MS:
+	case TSL2591_CTRL_ALS_INTEGRATION_600MS:
+		chip->als_settings.als_int_time = als_integration_time;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl2591_compatible_gain(struct tsl2591_chip *chip, const u8 als_gain)
+{
+	switch (als_gain) {
+	case TSL2591_CTRL_ALS_LOW_GAIN:
+	case TSL2591_CTRL_ALS_MED_GAIN:
+	case TSL2591_CTRL_ALS_HIGH_GAIN:
+	case TSL2591_CTRL_ALS_MAX_GAIN:
+		chip->als_settings.als_gain = als_gain;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl2591_compatible_als_persist(struct tsl2591_chip *chip,
+					  const u32 als_persist)
+{
+	switch (als_persist) {
+	case TSL2591_PRST_ALS_INT_CYCLE_ANY:
+	case TSL2591_PRST_ALS_INT_CYCLE_2:
+	case TSL2591_PRST_ALS_INT_CYCLE_3:
+	case TSL2591_PRST_ALS_INT_CYCLE_5:
+	case TSL2591_PRST_ALS_INT_CYCLE_10:
+	case TSL2591_PRST_ALS_INT_CYCLE_15:
+	case TSL2591_PRST_ALS_INT_CYCLE_20:
+	case TSL2591_PRST_ALS_INT_CYCLE_25:
+	case TSL2591_PRST_ALS_INT_CYCLE_30:
+	case TSL2591_PRST_ALS_INT_CYCLE_35:
+	case TSL2591_PRST_ALS_INT_CYCLE_40:
+	case TSL2591_PRST_ALS_INT_CYCLE_45:
+	case TSL2591_PRST_ALS_INT_CYCLE_50:
+	case TSL2591_PRST_ALS_INT_CYCLE_55:
+	case TSL2591_PRST_ALS_INT_CYCLE_60:
+		chip->als_settings.als_persist = als_persist;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsl2591_wait_adc_complete(struct tsl2591_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	struct tsl2591_als_settings settings = chip->als_settings;
+	int delay = ALS_TIME_SECS_TO_MS(settings.als_int_time);
+	int ret;
+	int i;
+
+	if (!delay)
+		return -EINVAL;
+
+	/*
+	 * Sleep for ALS integration time to allow enough time
+	 * for an ADC read cycle to complete. Check status after
+	 * delay for ALS valid
+	 */
+	msleep(delay);
+
+	/* Check for status ALS valid flag for up to 100ms */
+	for (i = 0; i < TSL2591_ALS_STS_VALID_COUNT; ++i) {
+		ret = i2c_smbus_read_byte_data(client, TSL2591_CMD_NOP |
+			TSL2591_STATUS);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to read register\n");
+			return -EINVAL;
+		}
+
+		if ((ret & TSL2591_STS_ALS_VALID_MASK) == TSL2591_STS_VAL_HIGH_MASK)
+			break;
+
+		if (i == (TSL2591_ALS_STS_VALID_COUNT - 1))
+			return -ENODATA;
+
+		usleep_range(9000, 10000);
+	}
+
+	return 0;
+}
+
+/*
+ * tsl2591_read_channel_data() - Reads raw channel data and calculates lux
+ *
+ * Formula for lux calculation;
+ * Derived from Adafruit's TSL2591 library
+ * Link: https://github.com/adafruit/Adafruit_TSL2591_Library
+ * Counts Per Lux (CPL) = (ATIME_ms * AGAIN) / LUX DF
+ * lux = ((C0DATA - C1DATA) * (1 - (C1DATA / C0DATA))) / CPL
+ *
+ * Scale values to get more representative value of lux i.e.
+ * lux = ((C0DATA - C1DATA) * (1000 - ((C1DATA * 1000) / C0DATA))) / CPL
+ *
+ * Channel 0 = IR + Visible
+ * Channel 1 = IR only
+ * Visible = Channel 0 - Channel 1
+ *
+ */
+static int tsl2591_read_channel_data(struct iio_dev *indio_dev)
+{
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	struct tsl2591_als_settings *settings = &chip->als_settings;
+	struct i2c_client *client = chip->client;
+	int i;
+	int ret;
+	u8 channel_data[TSL2591_NUM_DATA_CHANNELS];
+
+	int counts_per_lux;
+	int lux;
+	int gain_multiplier;
+
+	ret = tsl2591_wait_adc_complete(chip);
+	if (ret < 0) {
+		dev_err(&client->dev, "No data available. Err: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < TSL2591_NUM_DATA_CHANNELS; ++i) {
+		int reg = TSL2591_CMD_NOP | tsl2591_data_channels[i];
+
+		ret = i2c_smbus_read_byte_data(client, TSL2591_CMD_NOP | reg);
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Failed to read register %#04x\n", reg);
+			return -EINVAL;
+		}
+		channel_data[i] = ret;
+	}
+
+	chip->als_readings.als_ch0 =
+		le16_to_cpup((const __le16 *)&channel_data[0]);
+	chip->als_readings.als_ch1 =
+		le16_to_cpup((const __le16 *)&channel_data[2]);
+
+	dev_dbg(&client->dev, "both: %d\n", chip->als_readings.als_ch0);
+	dev_dbg(&client->dev, "ir: %d\n", chip->als_readings.als_ch1);
+
+	gain_multiplier = tsl2591_gain_to_multiplier(settings->als_gain);
+	if (gain_multiplier < 0) {
+		dev_err(&client->dev, "Invalid multiplier. Err: %d\n",
+			gain_multiplier);
+		return -EINVAL;
+	}
+
+	/* Calculate counts per lux value */
+	counts_per_lux = (ALS_TIME_SECS_TO_MS(settings->als_int_time) *
+			gain_multiplier) / TSL2591_LUX_COEFFICIENT;
+
+	dev_dbg(&client->dev, "Counts Per Lux (CPL): %d\n", counts_per_lux);
+
+	/* Calculate lux value */
+	lux = ((chip->als_readings.als_ch0 - chip->als_readings.als_ch1) *
+	(1000 - ((chip->als_readings.als_ch1 * 1000) /
+	chip->als_readings.als_ch0))) / counts_per_lux;
+
+	/* Divide by 1000 to get real lux value before scaling */
+	chip->als_readings.als_lux_int = lux / 1000;
+
+	/* Get the decimal part of lux reading */
+	chip->als_readings.als_lux_decimal =
+		(lux - (chip->als_readings.als_lux_int * 1000));
+
+	dev_dbg(&client->dev, "Raw lux calculation: %d\n", lux);
+
+	return ret;
+}
+
+static int tsl2591_set_als_gain_int_time(struct tsl2591_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	struct tsl2591_als_settings als_settings = chip->als_settings;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client,
+					TSL2591_CMD_NOP | TSL2591_CONTROL,
+					als_settings.als_int_time |
+					als_settings.als_gain);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to set als gain & int time\n");
+
+	return ret;
+}
+
+static int tsl2591_set_als_thresholds(struct tsl2591_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	struct tsl2591_als_settings als_settings = chip->als_settings;
+	int ret;
+
+	u8 als_lower_l;
+	u8 als_lower_h;
+	u8 als_upper_l;
+	u8 als_upper_h;
+
+	if (als_settings.als_lower_threshold >= als_settings.als_upper_threshold) {
+		dev_warn(&client->dev, "Lower threshold higher than upper\n");
+		return -EINVAL;
+	}
+
+	if (als_settings.als_upper_threshold > TSL2591_ALS_MAX_VALUE) {
+		dev_warn(&client->dev, "Upper threshold higher than max\n");
+		return -EINVAL;
+	}
+
+	als_lower_l = (als_settings.als_lower_threshold & 0x00FF);
+	als_lower_h = ((als_settings.als_lower_threshold >> 8) & 0x00FF);
+	als_upper_l = (als_settings.als_upper_threshold & 0x00FF);
+	als_upper_h = ((als_settings.als_upper_threshold >> 8) & 0x00FF);
+
+	dev_dbg(&client->dev, "Setting configuration - als lower l: %#04x\n",
+		als_lower_l);
+	dev_dbg(&client->dev, "Setting configuration - als lower h: %#04x\n",
+		als_lower_h);
+	dev_dbg(&client->dev, "Setting configuration - als upper l: %#04x\n",
+		als_upper_l);
+	dev_dbg(&client->dev, "Setting configuration - als upper h: %#04x\n",
+		als_upper_h);
+
+	ret = i2c_smbus_write_byte_data(client, TSL2591_CMD_NOP |
+		TSL2591_AILTL, als_lower_l);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to set als lower threshold\n");
+
+	ret = i2c_smbus_write_byte_data(client, TSL2591_CMD_NOP |
+		TSL2591_AILTH, als_lower_h);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to set als lower threshold\n");
+
+	ret = i2c_smbus_write_byte_data(client, TSL2591_CMD_NOP |
+		TSL2591_AIHTL, als_upper_l);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to set als upper threshold\n");
+
+	ret = i2c_smbus_write_byte_data(client, TSL2591_CMD_NOP |
+		TSL2591_AIHTH, als_upper_h);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to set als upper threshold\n");
+
+	return ret;
+}
+
+static int tsl2591_set_als_persist_cycle(struct tsl2591_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	struct tsl2591_als_settings als_settings = chip->als_settings;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, TSL2591_CMD_NOP |
+		TSL2591_PERSIST, als_settings.als_persist);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to set als persist cycle\n");
+
+	return ret;
+}
+
+static int tsl2591_set_power_state(struct tsl2591_chip *chip, u8 state)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, TSL2591_CMD_NOP |
+					TSL2591_ENABLE, state);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"Failed to set the power state to %#04x\n", state);
+
+	return ret;
+}
+
+static int tsl2591_get_power_state(struct tsl2591_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, TSL2591_CMD_NOP |
+					TSL2591_ENABLE);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to get power state\n");
+
+	return ret;
+}
+
+static ssize_t in_illuminance_integration_time_show(struct device *dev,
+						    struct device_attribute *attr,
+						    char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+
+	int als_int_time = ALS_TIME_SECS_TO_MS(chip->als_settings.als_int_time);
+
+	return sprintf(buf, "%d\n", als_int_time);
+}
+
+static ssize_t in_illuminance_integration_time_store(struct device *dev,
+						     struct device_attribute *attr,
+						     const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+
+	u32 int_time;
+	int value;
+
+	if (kstrtoint(buf, 0, &value) || !value)
+		return -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+
+	int_time = ALS_TIME_MS_TO_SECS(value);
+
+	if (tsl2591_compatible_int_time(chip, int_time))
+		goto calibrate_error;
+
+	if (tsl2591_set_als_gain_int_time(chip))
+		goto calibrate_error;
+
+	mutex_unlock(&chip->als_mutex);
+
+	return len;
+
+calibrate_error:
+	dev_err(&client->dev, "Failed to calibrate sensor\n");
+	mutex_unlock(&chip->als_mutex);
+	return -EINVAL;
+}
+
+static ssize_t in_illuminance_calibscale_show(struct device *dev,
+					      struct device_attribute *attr,
+						char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", tsl2591_gain_to_multiplier
+		(chip->als_settings.als_gain));
+}
+
+static ssize_t in_illuminance_calibscale_store(struct device *dev,
+					       struct device_attribute *attr,
+						const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+
+	u8 gain;
+	int value;
+
+	if (kstrtoint(buf, 0, &value) || !value)
+		return -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+
+	gain = tsl2591_multiplier_to_gain(value);
+
+	if (tsl2591_compatible_gain(chip, gain))
+		goto calibrate_error;
+
+	if (tsl2591_set_als_gain_int_time(chip))
+		goto calibrate_error;
+
+	mutex_unlock(&chip->als_mutex);
+
+	return len;
+
+calibrate_error:
+	dev_err(&client->dev, "Failed to calibrate sensor\n");
+	mutex_unlock(&chip->als_mutex);
+	return -EINVAL;
+}
+
+static ssize_t in_illuminance_period_available_show(struct device *dev,
+						    struct device_attribute *attr,
+						char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+		       tsl2591_als_period_list[chip->als_settings.als_int_time]);
+}
+
+static IIO_CONST_ATTR(in_illuminance_integration_time_available,
+				"100 200 300 400 500 600");
+static IIO_CONST_ATTR(in_illuminance_calibscale_available,
+				"1 25 428 9876");
+static IIO_DEVICE_ATTR_RW(in_illuminance_integration_time, 0);
+static IIO_DEVICE_ATTR_RW(in_illuminance_calibscale, 0);
+
+static struct attribute *tsl2591_sysfs_attrs_ctrl[] = {
+	&iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
+	&iio_const_attr_in_illuminance_calibscale_available.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_integration_time.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_calibscale.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2591_sysfs_attribute_group = {
+	.attrs = tsl2591_sysfs_attrs_ctrl,
+};
+
+static IIO_DEVICE_ATTR_RO(in_illuminance_period_available, 0);
+
+static struct attribute *tsl2591_event_attrs_ctrl[] = {
+	&iio_dev_attr_in_illuminance_period_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2591_event_attribute_group = {
+	.attrs = tsl2591_event_attrs_ctrl,
+};
+
+static const struct iio_event_spec tsl2591_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_PERIOD) |
+				BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec tsl2591_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+	{
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.event_spec = tsl2591_events,
+		.num_event_specs = ARRAY_SIZE(tsl2591_events),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+};
+
+static int tsl2591_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	dev_dbg(&client->dev, "Reading from sensor");
+
+	pm_runtime_get_sync(&chip->client->dev);
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = -EINVAL;
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type == IIO_INTENSITY) {
+			ret = tsl2591_read_channel_data(indio_dev);
+			if (ret < 0)
+				break;
+
+			if (chan->channel2 == IIO_MOD_LIGHT_BOTH) {
+				*val = chip->als_readings.als_ch0;
+				ret = IIO_VAL_INT;
+			} else if (chan->channel2 == IIO_MOD_LIGHT_IR) {
+				*val = chip->als_readings.als_ch1;
+				ret = IIO_VAL_INT;
+			} else {
+				ret = -EINVAL;
+			}
+		}
+		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		if (chan->type == IIO_LIGHT) {
+			ret = tsl2591_read_channel_data(indio_dev);
+			if (ret < 0)
+				break;
+			*val = chip->als_readings.als_lux_int;
+			*val2 = (chip->als_readings.als_lux_decimal * 1000);
+			ret = IIO_VAL_INT_PLUS_MICRO;
+		}
+		break;
+	}
+
+	mutex_unlock(&chip->als_mutex);
+
+	pm_runtime_mark_last_busy(&chip->client->dev);
+	pm_runtime_put_autosuspend(&chip->client->dev);
+
+	return ret;
+}
+
+static int tsl2591_read_event_value(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info, int *val,
+				int *val2)
+{
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+	int als_persist;
+	int period;
+	int ret;
+	int int_time;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			mutex_lock(&chip->als_mutex);
+			*val = chip->als_settings.als_upper_threshold;
+			mutex_unlock(&chip->als_mutex);
+			break;
+		case IIO_EV_DIR_FALLING:
+			mutex_lock(&chip->als_mutex);
+			*val = chip->als_settings.als_lower_threshold;
+			mutex_unlock(&chip->als_mutex);
+			break;
+		default:
+			return -EINVAL;
+		}
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_EV_INFO_PERIOD:
+		mutex_lock(&chip->als_mutex);
+
+		ret = i2c_smbus_read_byte_data(client,
+					       TSL2591_CMD_NOP | TSL2591_PERSIST);
+		if (ret <= 0 || ret > TSL2591_PRST_ALS_INT_CYCLE_MAX)
+			goto err;
+
+		als_persist = tsl2591_persist_cycle_to_lit(ret);
+		int_time = ALS_TIME_SECS_TO_MS(chip->als_settings.als_int_time);
+		period = als_persist * (int_time * MSEC_PER_SEC);
+
+		*val = period / USEC_PER_SEC;
+		*val2 = period % USEC_PER_SEC;
+
+		mutex_unlock(&chip->als_mutex);
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+
+err:
+	mutex_unlock(&chip->als_mutex);
+	return -EINVAL;
+}
+
+static int tsl2591_write_event_value(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info, int val,
+				int val2)
+{
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	int period, int_time, als_cycle;
+
+	if (val < 0 || val2 < 0)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		if (val > TSL2591_ALS_MAX_VALUE)
+			return -EINVAL;
+		/* Lower threshold should not be higher than upper */
+		if (dir == IIO_EV_DIR_FALLING)
+			if (val > chip->als_settings.als_upper_threshold)
+				return -EINVAL;
+
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			mutex_lock(&chip->als_mutex);
+			chip->als_settings.als_upper_threshold = val;
+			if (tsl2591_set_als_thresholds(chip))
+				goto err;
+			mutex_unlock(&chip->als_mutex);
+			break;
+		case IIO_EV_DIR_FALLING:
+			mutex_lock(&chip->als_mutex);
+			chip->als_settings.als_lower_threshold = val;
+			if (tsl2591_set_als_thresholds(chip))
+				goto err;
+			mutex_unlock(&chip->als_mutex);
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_EV_INFO_PERIOD:
+		mutex_lock(&chip->als_mutex);
+		int_time = ALS_TIME_SECS_TO_MS(chip->als_settings.als_int_time);
+		if (!val && val2)
+			period = (val2 / MSEC_PER_SEC) / int_time;
+		else if (val && !val2)
+			period = (val * MSEC_PER_SEC) / int_time;
+		else if (val && val2)
+			period = ((val * MSEC_PER_SEC) +
+				(val2 / MSEC_PER_SEC)) / int_time;
+		else
+			goto err;
+
+		als_cycle = tsl2591_persist_lit_to_cycle(period);
+		if (als_cycle < 0)
+			goto err;
+		if (tsl2591_compatible_als_persist(chip, als_cycle))
+			goto err;
+		if (tsl2591_set_als_persist_cycle(chip))
+			goto err;
+		mutex_unlock(&chip->als_mutex);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+err:
+	mutex_unlock(&chip->als_mutex);
+	return -EINVAL;
+}
+
+static int tsl2591_read_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir)
+{
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+	ret = tsl2591_get_power_state(chip);
+	mutex_unlock(&chip->als_mutex);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & TSL2591_ENABLE_ALS_INT);
+}
+
+static int tsl2591_write_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				int state)
+{
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+
+	if (state && !chip->events_enabled) {
+		chip->events_enabled = true;
+		pm_runtime_get_sync(&client->dev);
+	} else if (!state && chip->events_enabled) {
+		chip->events_enabled = false;
+		pm_runtime_mark_last_busy(&client->dev);
+		pm_runtime_put_autosuspend(&client->dev);
+	}
+
+	return 0;
+}
+
+static const struct iio_info tsl2591_info = {
+	.attrs = &tsl2591_sysfs_attribute_group,
+	.event_attrs = &tsl2591_event_attribute_group,
+	.read_raw = tsl2591_read_raw,
+	.read_event_value = tsl2591_read_event_value,
+	.write_event_value = tsl2591_write_event_value,
+	.read_event_config = tsl2591_read_event_config,
+	.write_event_config = tsl2591_write_event_config,
+};
+
+static int __maybe_unused tsl2591_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+	ret = tsl2591_set_power_state(chip, TSL2591_PWR_OFF);
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static int __maybe_unused tsl2591_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	int ret;
+	int power_state;
+
+	if (chip->events_enabled)
+		power_state = TSL2591_PWR_ON | TSL2591_ENABLE_ALS_INT |
+				TSL2591_ENABLE_ALS;
+	else
+		power_state = TSL2591_PWR_ON | TSL2591_ENABLE_ALS;
+
+	mutex_lock(&chip->als_mutex);
+	ret = tsl2591_set_power_state(chip, power_state);
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static const struct dev_pm_ops tsl2591_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(tsl2591_suspend, tsl2591_resume, NULL)
+};
+
+static irqreturn_t tsl2591_event_handler(int irq, void *private)
+{
+	struct iio_dev *dev_info = private;
+	struct tsl2591_chip *chip = iio_priv(dev_info);
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	if (!chip->events_enabled)
+		return IRQ_HANDLED;
+
+	iio_push_event(dev_info,
+		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+					    IIO_EV_TYPE_THRESH,
+					IIO_EV_DIR_EITHER),
+			iio_get_time_ns(dev_info));
+
+	/* Clear ALS irq */
+	ret = i2c_smbus_write_byte(client, TSL2591_CMD_SF_CALS_NPI);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to clear als irq\n");
+
+	return IRQ_HANDLED;
+}
+
+static int tsl2591_load_defaults(struct tsl2591_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+
+	chip->als_settings.als_int_time = TSL2591_DEFAULT_ALS_INT_TIME;
+	chip->als_settings.als_gain = TSL2591_DEFAULT_ALS_GAIN;
+	chip->als_settings.als_persist = TSL2591_DEFAULT_ALS_PERSIST;
+	chip->als_settings.als_lower_threshold =
+		TSL2591_DEFAULT_ALS_LOWER_THRESHOLD;
+	chip->als_settings.als_upper_threshold =
+		TSL2591_DEFAULT_ALS_UPPER_THRESHOLD;
+
+	if (tsl2591_set_als_gain_int_time(chip)) {
+		dev_err(&client->dev, "Failed to set als gain and int time\n");
+		return -EINVAL;
+	}
+
+	if (tsl2591_set_als_persist_cycle(chip)) {
+		dev_err(&client->dev, "Failed to set als persist cycle\n");
+		return -EINVAL;
+	}
+
+	if (tsl2591_set_als_thresholds(chip)) {
+		dev_err(&client->dev, "Failed to set als thresholds\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void tsl2591_chip_off(void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct tsl2591_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	tsl2591_set_power_state(chip, TSL2591_PWR_OFF);
+}
+
+static int tsl2591_probe(struct i2c_client *client)
+{
+	struct tsl2591_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev,
+			"I2C smbus byte data functionality is not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	chip->client = client;
+	i2c_set_clientdata(client, indio_dev);
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, tsl2591_event_handler,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"tsl2591_irq", indio_dev);
+		if (ret) {
+			dev_err(&client->dev, "IRQ request error %d\n", -ret);
+			return -EINVAL;
+		}
+	}
+
+	mutex_init(&chip->als_mutex);
+
+	ret = i2c_smbus_read_byte_data(client,
+				       TSL2591_CMD_NOP | TSL2591_DEVICE_ID);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"Failed to read the device ID register\n");
+		return ret;
+	}
+
+	if ((ret & TSL2591_DEVICE_ID_MASK) != TSL2591_DEVICE_ID_VAL) {
+		dev_err(&client->dev, "Device ID: %#04x unknown\n", ret);
+		return -EINVAL;
+	}
+
+	indio_dev->info = &tsl2591_info;
+	indio_dev->channels = tsl2591_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsl2591_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->client->name;
+	chip->events_enabled = false;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev,
+					 TSL2591_POWER_OFF_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	if (tsl2591_load_defaults(chip)) {
+		dev_err(&client->dev, "Failed to load sensor defaults\n");
+		return -EINVAL;
+	}
+
+	ret = i2c_smbus_write_byte(client, TSL2591_CMD_SF_CALS_NPI);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to clear als irq\n");
+		return -EINVAL;
+	}
+
+	/* Add chip off to automatically managed path */
+	ret = devm_add_action_or_reset(&client->dev,
+				       tsl2591_chip_off,
+					indio_dev);
+	if (ret < 0)
+		return -EINVAL;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id tsl2591_of_match[] = {
+	{ .compatible = "amstaos,tsl2591"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, tsl2591_of_match);
+
+static struct i2c_driver tsl2591_driver = {
+	.driver = {
+		.name = "tsl2591",
+		.pm = &tsl2591_pm_ops,
+		.of_match_table = tsl2591_of_match,
+	},
+	.probe_new = tsl2591_probe,
+};
+module_i2c_driver(tsl2591_driver);
+
+MODULE_AUTHOR("Joe Sandom <joe.g.sandom@xxxxxxxxx>");
+MODULE_DESCRIPTION("TAOS tsl2591 ambient light sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.17.1





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux