On Tue, Mar 9, 2021 at 3:18 AM Gwendal Grignou <gwendal@xxxxxxxxxxxx> wrote: > > Each drivers are setting trig->dev.parent to a common value - usually. "Each driver is" > Move that in boiler plate code. > > The first patch set the parent pointer, the next is an automatic change > with spatch. > The remaining ones are straightforward manual changes. Few nit-picks here and there, overall LGTM Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> > Few drivers remain: > drivers/iio/adc/at91-sama5d2_adc.c > drivers/iio/adc/mxs-lradc-adc.c > trigger parent set to iio device instead of its parent. > > drivers/iio/adc/dln2-adc.c > trigger parent not set. > > drivers/iio/gyro/mpu3050-core.c > trigger allocated for iio device but parent set to iio device parent. > > drivers/iio/imu/bmi160/bmi160_core.c > drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c > trigger allocated for iio device but parent set to mapped register device holder. Looks like iio device parent. > > drivers/iio/trigger/stm32-lptimer-trigger.c > drivers/iio/trigger/stm32-timer-trigger.c > trigger allocated for device, but parent set to device parent. > > Gwendal Grignou (8): > iio: set default trig->dev.parent > iio: fix devm_iio_trigger_alloc with parent.cocci > iio: adis_trigger: Remove code to set trigger parent > iio: gp2ap020a00f: Remove code to set trigger parent > iio: lmp91000: Remove code to set trigger parent > iio: chemical: atlas: Remove code to set trigger parent > iio: as3935: Remove code to set trigger parent > iio: xilinx-xadc: Remove code to set trigger parent > > drivers/iio/accel/adxl372.c | 2 -- > drivers/iio/accel/bma180.c | 3 +- > drivers/iio/accel/bmc150-accel-core.c | 1 - > drivers/iio/accel/kxcjk-1013.c | 2 -- > drivers/iio/accel/mma8452.c | 1 - > drivers/iio/accel/mxc4005.c | 1 - > drivers/iio/accel/stk8312.c | 1 - > drivers/iio/accel/stk8ba50.c | 1 - > drivers/iio/adc/ad7606.c | 1 - > drivers/iio/adc/ad7766.c | 1 - > drivers/iio/adc/ad7768-1.c | 1 - > drivers/iio/adc/ad_sigma_delta.c | 6 ++-- > drivers/iio/adc/at91_adc.c | 3 +- > drivers/iio/adc/max1027.c | 1 - > drivers/iio/adc/xilinx-xadc-core.c | 1 - > drivers/iio/chemical/atlas-sensor.c | 1 - > drivers/iio/chemical/ccs811.c | 1 - > drivers/iio/chemical/scd30_core.c | 1 - > .../common/hid-sensors/hid-sensor-trigger.c | 4 +-- > .../common/st_sensors/st_sensors_trigger.c | 4 +-- > drivers/iio/gyro/adxrs290.c | 1 - > drivers/iio/gyro/bmg160_core.c | 2 -- > drivers/iio/gyro/fxas21002c_core.c | 1 - > drivers/iio/gyro/itg3200_buffer.c | 3 +- > drivers/iio/health/afe4403.c | 1 - > drivers/iio/health/afe4404.c | 1 - > drivers/iio/humidity/hts221_buffer.c | 1 - > drivers/iio/imu/adis_trigger.c | 10 ++---- > drivers/iio/imu/kmx61.c | 1 - > drivers/iio/industrialio-trigger.c | 36 +++++++++++-------- > drivers/iio/light/gp2ap020a00f.c | 1 - > drivers/iio/light/rpr0521.c | 1 - > drivers/iio/light/si1145.c | 1 - > drivers/iio/light/st_uvis25_core.c | 1 - > drivers/iio/light/vcnl4000.c | 1 - > drivers/iio/light/vcnl4035.c | 1 - > drivers/iio/magnetometer/bmc150_magn.c | 1 - > drivers/iio/magnetometer/rm3100-core.c | 1 - > drivers/iio/potentiostat/lmp91000.c | 3 +- > drivers/iio/pressure/zpa2326.c | 1 - > drivers/iio/proximity/as3935.c | 1 - > drivers/iio/proximity/sx9310.c | 1 - > drivers/iio/proximity/sx9500.c | 1 - > drivers/iio/trigger/iio-trig-hrtimer.c | 2 +- > drivers/iio/trigger/iio-trig-interrupt.c | 2 +- > drivers/iio/trigger/iio-trig-loop.c | 2 +- > drivers/iio/trigger/iio-trig-sysfs.c | 3 +- > include/linux/iio/iio.h | 2 +- > include/linux/iio/trigger.h | 3 +- > 49 files changed, 42 insertions(+), 81 deletions(-) > > -- > 2.30.1.766.gb4fecdf3b7-goog > -- With Best Regards, Andy Shevchenko
