Linux IIO Development

• Thread Index

• Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PULL] IIO: First round fixes for IIO in the 6.10 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH v3 3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 8/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 0/8] Enable eQEP DT support for Sitara K3 platforms
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 2/8] counter/ti-eqep: Add new ti-am62-eqep compatible
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 7/8] arm64: dts: ti: k3-am64x-sk: Enable eQEP
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH] iio: add missing MODULE_DESCRIPTION() macros
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in union
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in DMA safe region
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v6 0/13] Add support for AXP192 PMIC
  • From: Alex Bee <knaerzche@xxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v7 9/9] iio: adc: ad7173: Add support for AD411x devices
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 6/9] iio: adc: ad7173: add support for special inputs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 8/9] iio: adc: ad7173: document sampling frequency behaviour
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 5/9] iio: adc: ad7173: refactor ain and vref selection
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 7/9] iio: adc: ad7173: refactor device info structs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 3/9] iio: adc: ad_sigma_delta: add disable_one callback
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 4/9] iio: adc: ad7173: refactor channel configuration parsing
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 2/9] dt-bindings: adc: ad7173: add support for ad411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 0/9] Add support for AD411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v7 1/9] dt-bindings: iio: adc: Add common-mode-channel property
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• Re: [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 3/7] dt-bindings: iio: adc: ti,ads1015: add compatible for tla2021
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 2/6] iio: light: stk3310: Implement vdd supply and power it off during suspend
  • From: Aren <aren@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: humidity: si7020: add heater support
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings:iio:proximity: Add hx9023s binding
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• [PATCH v4 0/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: frequency: adf4350: add clk provider
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2] iio: humidity: si7020: add heater support
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2 2/2] iio: frequency: adf4350: add clk provider
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adf4350: add clk provider prop
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH] staging: iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/8] iio: accel: adxl313: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 8/9] iio: adc: ad7173: document sampling frequency behaviour
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 7/9] iio: adc: ad7173: refactor device info structs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/8] iio: accel: adxl313: simplify with spi_get_device_match_data()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/8] iio: simplify with spi_get_device_match_data()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: imu: inv_icm42600: add register caching in the regmap
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH v10 6/6] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2 19/19] iio: chemical: bme680: Refactorize reading functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 18/19] iio: chemical: bme680: Move forced mode setup in ->read_raw()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 17/19] iio: chemical: bme680: Remove redundant gas configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 16/19] iio: chemical: bme680: Move probe errors to dev_err_probe()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 15/19] iio: chemical: bme680: Modify startup procedure
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 14/19] iio: chemical: bme680: Make error checks consistent
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in union
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in read/write buffer union
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in DMA safe region
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 08/19] iio: chemical: bme680: Remove remaining ACPI-only stuff
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 12/19] iio: chemical: bme680: Allocate IIO device before chip initialization
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 11/19] iio: chemical: bme680: Use bulk reads for calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 10/19] iio: chemical: bme680: Remove duplicate register read
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 09/19] iio: chemical: bme680: Sort headers alphabetically
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 07/19] iio: chemical: bme680: Drop unnecessary casts and correct adc data types
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 06/19] iio: chemical: bme680: Fix read/write ops to device by adding mutexes
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 05/19] iio: chemical: bme680: Fix typo in define
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 04/19] iio: chemical: bme680: Fix sensor data read operation
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 03/19] iio: chemical: bme680: Fix overflows in compensate() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 02/19] iio: chemical: bme680: Fix calibration data variable
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 01/19] iio: chemical: bme680: Fix pressure value output
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 00/19] iio: chemical: bme680: Driver fixes and cleanup
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/7] dt-bindings: iio: adc: ti,ads1015: add compatible for tla2021
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: si7020: add heater support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 11/17] iio: chemical: bme680: Use bulk reads for calibration data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 6/6] Documentation: iio: Document high-speed DMABUF based API
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 2/9] dt-bindings: adc: ad7173: add support for ad411x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ti-ads1119: Add driver
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v2 0/2] iio: adc: ti-ads1119: Add driver
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: light: ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 1/9] dt-bindings: iio: adc: Add common-mode-channel property
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• [PATCH v6 7/9] iio: adc: ad7173: refactor device info structs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 8/9] iio: adc: ad7173: document sampling frequency behaviour
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 4/9] iio: adc: ad7173: refactor channel configuration parsing
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 2/9] dt-bindings: adc: ad7173: add support for ad411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v6 0/9] Add support for AD411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH] staging: iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  • From: "Uwe Kleine-König" <ukleinek@xxxxxxxxxxxx>
• Re: [PATCH V2 0/4] Add GPADC for Allwinner H616
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3] iio: humidity: hdc3020: fix hysteresis representation
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 8/8] iio: adc: mcp3564: drop redundant open-coded spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 7/8] iio: dac: max5522: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 6/8] iio: addac: ad74413r: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 5/8] iio: adc: ti-tsc2046: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/8] iio: adc: ti-ads131e08: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/8] iio: adc: max11205: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/8] iio: accel: adxl355: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/8] iio: accel: adxl313: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/8] iio: simplify with spi_get_device_match_data()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 06/17] misc: eeprom: at24: Change nvmem reg_read/write return type
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
  • From: kauschluss <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH v1 05/17] misc: ds1682: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v3 4/4] iio: common: scmi_iio: convert to dev_err_probe()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v3 1/4] dev_printk: add new dev_err_probe() helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v3 3/4] iio: backend: make use of dev_err_cast_probe()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v3 0/4] dev_printk: add dev_errp_probe() helper
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 05/17] misc: ds1682: Change nvmem reg_read/write return type
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
  • From: "A. Sverdlin" <alexander.sverdlin@xxxxxxxxxxx>
• [PATCH v4 2/2] iio: imu: inv_icm42600: add support of accel low-power mode
  • From: inv.git-commit@xxxxxxx
• [PATCH v4 1/2] iio: document inv_icm42600 driver private sysfs attributes
  • From: inv.git-commit@xxxxxxx
• [PATCH v4 0/2] iio: imu: inv_icm42600: add support of accel low power
  • From: inv.git-commit@xxxxxxx
• [PATCH v3] iio: humidity: hdc3020: fix hysteresis representation
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH v5 9/9] iio: adc: ad7173: Add support for AD411x devices
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2] iio: humidity: hdc3020: fix hysteresis representation
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH v5 7/9] iio: adc: ad7173: refactor device info structs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1 00/17] nvmem: Handle change of return type in reg_read/write() definition
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v1 17/17] rtc: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 16/17] soc: tegra: fuse: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 15/17] thunderbolt: retimer: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 14/17] thunderbolt: switch: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 13/17] w1: slaves: w1_ds250x: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 12/17] soc: atmel: sfr: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 11/17] mtd: ubi: nvmem: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 10/17] mtd: core: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 09/17] misc: mchp_pci1xxxx: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 08/17] misc: eeprom: 93xx46: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 06/17] misc: eeprom: at24: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 05/17] misc: ds1682: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 04/17] iio: pressure: bmp280: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 03/17] media: i2c: video-i2c: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 02/17] media: i2c: ov2740: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• [PATCH v1 00/17] nvmem: Handle change of return type in reg_read/write() definition
  • From: Joy Chakraborty <joychakr@xxxxxxxxxx>
• Re: [PATCH V2 1/4] dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH V2 4/4] arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V2 1/4] dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V2 2/4] clk: sunxi-ng: h616: Add clock/reset for GPADC
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V2 3/4] arm64: dts: allwinner: h616: Add GPADC device node
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V2 0/4] Add GPADC for Allwinner H616
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 4/7] dt-bindings: phy: armada-cp110-utmi: add optional swap-dx-lanes property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 0/6] Add support for AD4000 series of ADCs
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v10 0/6] iio: new DMABUF based API v10
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 6/6] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v10 6/6] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v10 5/6] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v10 4/6] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v10 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v10 2/6] dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v10 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 0/6] Add support for AD4000 series of ADCs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/6] spi: bitbang: Implement support for MOSI idle state configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 3/6] spi: spi-gpio: Add support for MOSI idle state configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: ad7192: Clean up dev
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7192: Fix clock config
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: ad7192: Fix clock config
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: ad7192: Fix clock config
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: ad7192: Clean up dev
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 3/3] iio: adc: ad7192: Fix clock config
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: adc: ad7192: Fix clock config
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v2 1/3] iio: adc: ad7192: Clean up dev
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH 0/3] iio: adc: ad7192: Update
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: frequency: adf4350: add clk provider
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] bindings: frequency: adf4350: add clk provider
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson: add support for the GXLX SoC
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• [PATCH v3 6/6] MAINTAINERS: Add ScioSense ENS160
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v3 5/6] iio: chemical: ens160: add power management support
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v3 4/6] iio: chemical: ens160: add triggered buffer support
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v3 3/6] iio: chemical: add driver for ENS160 sensor
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: iio: chemical: add ENS160 sensor
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: vendor-prefixes: add ScioSense
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v3 0/6] Add driver for ENS160 sensor
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 3/6] spi: spi-gpio: Add support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 2/6] spi: bitbang: Implement support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v3 0/6] Add support for AD4000 series of ADCs
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: fix bmp580 temp read
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PULL]
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: First round fixes for IIO in the 6.10 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL]
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: fix bmp580 temp read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 3/7] dt-bindings: iio: adc: ti,ads1015: add compatible for tla2021
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 2/9] dt-bindings: adc: ad7173: add support for ad411x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 1/9] dt-bindings: iio: adc: Add common-mode-channel property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 4/7] dt-bindings: phy: armada-cp110-utmi: add optional swap-dx-lanes property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 2/9] dt-bindings: adc: ad7173: add support for ad411x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] bindings: frequency: adf4350: add clk provider
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH] counter: ftm-quaddec: add missing MODULE_DESCRIPTION() macro
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH] counter: ftm-quaddec: add missing MODULE_DESCRIPTION() macro
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH] counter: ftm-quaddec: add missing MODULE_DESCRIPTION() macro
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5] iio: temperature: mcp9600: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/5] math.h: Add unsigned 8 bits fractional numbers type
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: mediatek: Add ADC node on MT6357, MT6358, MT6359 PMICs
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v2 4/5] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v2 3/5] math.h: Add unsigned 8 bits fractional numbers type
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: mfd: mediatek,mt6357: Describe Auxiliary ADC subdev
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v2 0/5] MediaTek MT6357/8/9 PMIC Auxiliary ADC support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson: add support for the GXLX SoC
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: dac: adi-axi-dac: add platform dependencies
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH] iio: adc: adi-axi-adc: add platform dependencies
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson: add support for the GXLX SoC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v4 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v4 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Arthur Becker <arthur.becker@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Arthur Becker via B4 Relay <devnull+arthur.becker.sentec.com@xxxxxxxxxx>
• [PATCH v4 0/2] Add driver for Vishay VEML6040
  • From: Arthur Becker via B4 Relay <devnull+arthur.becker.sentec.com@xxxxxxxxxx>
• [PATCH v4 1/2] iio: light: driver for Vishay VEML6040
  • From: Arthur Becker via B4 Relay <devnull+arthur.becker.sentec.com@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: amlogic,meson-saradc: add GXLX SoC compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: light: ROHM BH1745
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: meson: add support for the GXLX SoC
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: amlogic,meson-saradc: add GXLX SoC compatible
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH] iio: humidity: si7020: add heater support
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• Re: [PATCH v2 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1 04/17] iio: chemical: bme680: Fix sensor data read operation
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 11/17] iio: chemical: bme680: Use bulk reads for calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: add support for multiple scan types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix channel read regression
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 13/17] iio: chemical: bme680: Add read buffers in DMA safe region
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 11/17] iio: chemical: bme680: Use bulk reads for calibration data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 04/17] iio: chemical: bme680: Fix sensor data read operation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: ABI: add DAC 42kohm_to_gnd powerdown mode
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: light: driver for Vishay VEML6040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: ad7266: Fix codestyle error
  • From: Fernando Yang <hagisf@xxxxxx>
• [PATCH v2 2/3] iio: adc: ad7266: Use iio_device_claim_direct_scoped()
  • From: Fernando Yang <hagisf@xxxxxx>
• [PATCH v2 1/3] iio: adc: ad7266: Fix variable checking bug
  • From: Fernando Yang <hagisf@xxxxxx>
• Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
  • From: Ivan Orlov <ivan.orlov0322@xxxxxxxxx>
• Re: [PATCH v2 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Ivan Orlov <ivan.orlov0322@xxxxxxxxx>
• Re: [PATCH v4 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• [PATCH v5 4/9] iio: adc: ad7173: refactor channel configuration parsing
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 7/9] iio: adc: ad7173: refactor device info structs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 9/9] iio: adc: ad7173: Add support for AD411x devices
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 8/9] iio: adc: ad7173: document sampling frequency behaviour
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 6/9] iio: adc: ad7173: add support for special inputs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 5/9] iio: adc: ad7173: refactor ain and vref selection
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 3/9] iio: adc: ad_sigma_delta: add disable_one callback
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 1/9] dt-bindings: iio: adc: Add common-mode-channel property
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 2/9] dt-bindings: adc: ad7173: add support for ad411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v5 0/9] Add support for AD411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v2 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: light: ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH v4 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: light: ROHM BH1745
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 2/3] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: Add maintainer for ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: light: ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v4 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 1/2] iio: light: driver for Vishay VEML6040
  • From: Arthur Becker <arthur.becker@xxxxxxxxxx>
• [PATCH 2/2] drivers: iio: frequency: adf4350: add clk provider
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 1/2] bindings: frequency: adf4350: add clk provider
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: add support for multiple scan types
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Arthur Becker <arthur.becker@xxxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH] iio: inkern: fix channel read regression
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v3 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v3 2/5] iio: ABI: add DAC 42kohm_to_gnd powerdown mode
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v3 1/5] iio: ABI: Generalize ABI documentation for DAC
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v3 0/5] Add driver for LTC2664 and LTC2672
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH] counter: ftm-quaddec: add missing MODULE_DESCRIPTION() macro
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH] iio: pressure: bmp280: fix bmp580 temp read
  • From: Adam Rizkalla <ajarizzo@xxxxxxxxx>
• Re: [PATCH v1 17/17] iio: chemical: bme680: Refactorize reading functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 14/17] iio: chemical: bme680: Modify startup procedure
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 13/17] iio: chemical: bme680: Add read buffers in DMA safe region
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 11/17] iio: chemical: bme680: Use bulk reads for calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 10/17] iio: chemical: bme680: Remove duplicate register read
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 05/17] iio: chemical: bme680: Fix type in define
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 04/17] iio: chemical: bme680: Fix sensor data read operation
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH] iio: event: use sizeof(*pointer) instead of sizeof(type)
  • From: Erick Archer <erick.archer@xxxxxxxxxxx>
• Re: iio: iio-trig-hrtimer bug on suspend/resume when used with bmi160 and bmi323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 7/7] arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 6/7] arm64: dts: add description for solidrun cn9131 solidwan board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 5/7] arm64: dts: add description for solidrun cn9130 som and clearfog boards
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 3/7] dt-bindings: iio: adc: ti,ads1015: add compatible for tla2021
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 4/7] dt-bindings: phy: armada-cp110-utmi: add optional swap-dx-lanes property
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 2/7] dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 0/7] arm64: dts: add description for solidrun cn9130 som and clearfog boards
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• Re: [PATCH v4] iio: temperature: mcp9600: add threshold events support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: ti-ads1119: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: add ti,ads1119
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v3 1/2] dt-bindings:iio:proximity: Add hx9023s binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio-proximity-hx9023s-Add-TYHX-HX9023S-sensor-driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: light: driver for Vishay VEML6040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc161s626: make use of iio_device_claim_direct_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma7660: add mount-matrix support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: stabilized timestamping in interrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 17/17] iio: chemical: bme680: Refactorize reading functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 14/17] iio: chemical: bme680: Modify startup procedure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 13/17] iio: chemical: bme680: Add read buffers in DMA safe region
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 11/17] iio: chemical: bme680: Use bulk reads for calibration data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 10/17] iio: chemical: bme680: Remove duplicate register read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 05/17] iio: chemical: bme680: Fix type in define
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 04/17] iio: chemical: bme680: Fix sensor data read operation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 00/17] iio: chemical: bme680: Driver cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: imu: inv_icm42600: add support of accel low-power mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7173: Fix sampling frequency setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: adc: ad7173: Clear append status bit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: adc: ad7173: fix buffers enablement for ad7176-2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] driver: iio: add missing checks on iio_info's callback access
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad9739a: drop COMPILE_TEST option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: ams-iaq-core: clean up codestyle warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] driver: iio: add missing checks on iio_info's callback access
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/6] iio: chemical: ens160: add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: chemical: add driver for ENS160 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/6] Add support for adis16545/47
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 9/9] drivers: iio: imu: Add support for adis1657x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/9] adis16501 and adis1657x support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_icm42600: stabilized timestamp in interrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: light: lm3533-als: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: add support for multiple scan types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 0/7] iio: adc: add new ad7380 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: add support for multiple scan types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: add support for multiple scan types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio: adc: adi-axi-adc: make sure DRP is locked on enable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: adc: add a7779 doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3] iio: accel: st_accel: add LIS2DS12
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v2] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/6] iio: adc: ad7173: refactor device info structs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/6] iio: adc: ad7173: add support for special inputs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: accel: st_accel: add LIS2DS12
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix channel read regression
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: adrf6780: rm clk provider include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: light: lm3533-als: Remove the driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: si7020: add heater support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 4/4] mfd: lm3533: Remove the driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 4/4] mfd: lm3533: Remove the driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: iio: chemical: add ENS160 sensor
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: vendor-prefixes: add ScioSense
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH 5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 4/5] iio: adc: ad7793: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/5] iio: adc: ad7292: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/5] iio: adc: use devm_regulator_get_enable_read_voltage round 1
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 6/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v4 4/6] iio: adc: ad7173: add support for special inputs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v4 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v4 5/6] iio: adc: ad7173: refactor device info structs
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v4 2/6] iio: adc: ad7173: refactor channel configuration parsing
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v4 0/6] Add support for AD411x
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v1 2/4] iio: light: lm3533-als: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/4] backlight: lm3533_bl: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/4] mfd: lm3533: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/4] leds: lm3533: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v1 3/4] mfd: mt6397-core: Add support for AUXADCs on MT6357/58/59 PMICs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: adc: add a7779 doc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: adc: add a7779 doc
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: adc: add a7779 doc
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v3 1/1] dt-bindings: iio: adc: add a7779 doc
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v3 1/1] dt-bindings:iio:adc: correct previous patch
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: adi-axi-adc: make sure DRP is locked on enable
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 1/2] iio: adc: adi-axi-adc: don't allow concurrent enable/disable calls
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v3 0/2] iio: adc: adi-axi-adc: make sure DRP is locked on enable
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: ranechita <ramona.nechita@xxxxxxxxxx>
• RE: [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio-proximity-hx9023s-Add-TYHX-HX9023S-sensor-driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings:iio:proximity: Add hx9023s binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: add a7779 doc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] drivers: iio: adc: add support for ad777x family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 8/8] arm64: defconfig: Enable TI eQEP Driver
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v3 5/5] iio: adc: ad7380: add oversampling support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 3/5] iio: add support for multiple scan types per channel
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 4/5] iio: adc: ad7380: use spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 1/5] iio: introduce struct iio_scan_type
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 2/5] iio: buffer: use struct iio_scan_type to simplify code
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 0/5] iio: add support for multiple scan types
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• [PATCH v3] iio: imu: inv_icm42600: add support of accel low-power mode
  • From: inv.git-commit@xxxxxxx
• Re: iio: iio-trig-hrtimer bug on suspend/resume when used with bmi160 and bmi323
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 5/5] iio: adc: ad7173: Fix sampling frequency setting
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v3 4/5] iio: adc: ad7173: Clear append status bit
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v3 3/5] iio: adc: ad7173: Remove index from temp channel
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v3 2/5] iio: adc: ad7173: Add ad7173_device_info names
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v3 0/5] AD7173 fixes
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• [PATCH v3 1/5] iio: adc: ad7173: fix buffers enablement for ad7176-2
  • From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v1 4/4] arm64: dts: mediatek: Add ADC node on MT6357, MT6358, MT6359 PMICs
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 3/4] mfd: mt6397-core: Add support for AUXADCs on MT6357/58/59 PMICs
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 0/4] MediaTek MT6357/8/9 PMIC Auxiliary ADC support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH] iio: frequency: adrf6780: rm clk provider include
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3] driver: iio: add missing checks on iio_info's callback access
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Arthur Becker <arthur.becker@xxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Arthur Becker <arthur.becker@xxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: ranechita <ramona.nechita@xxxxxxxxxx>
• RE: [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: inkern: fix channel read regression
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 5/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad7173: Reduce device info struct size
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 5/5] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: adc: ad7173: Add support for AD411x devices
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad7173: Reduce device info struct size
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v7 5/5] iio: pressure: bmp280: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: iio: chemical: add ENS160 sensor
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: iio: chemical: add ENS160 sensor
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: vendor-prefixes: add ScioSense
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: adc: add a7779 doc
  • From: ranechita <ramona.nechita@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: "Dr. David Alan Gilbert" <linux@xxxxxxxxxxx>
• [PATCH v2] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: linux@xxxxxxxxxxx
• [PATCH] iio: imu: inv_icm42600: stabilized timestamp in interrupt
  • From: inv.git-commit@xxxxxxx
• RE: [PATCH] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• RE: [PATCH v2] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: iio: adc: add a7779 doc
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v2] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] drivers: iio: adc: add support for ad777x family
  • From: ranechita <ramona.nechita@xxxxxxxxxx>
• RE: [PATCH] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: ti-ads1119: Add driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v5 9/9] drivers: iio: imu: Add support for adis1657x family
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2] driver: iio: add missing checks on iio_info's callback access
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: adc: ad7173: Add support for AD411x devices
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v2] driver: iio: add missing checks on iio_info's callback access
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 5/6] iio: adc: ad7173: Add support for AD411x devices
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 4/6] iio: adc: ad7173: add support for special inputs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 3/6] iio: adc: ad7173: refactor ain and vref selection
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/6] iio: adc: ad7173: refactor channel configuration parsing
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad7173: Reduce device info struct size
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2] driver: iio: add missing checks on iio_info's callback access
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2] driver: iio: add missing checks on iio_info's callback access
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] driver: iio: add missing checks on iio_info's callback access
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] driver: iio: add missing checks on iio_info's callback access
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/6] Add support for adis16545/47
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH] iio: dac: ad9739a: drop COMPILE_TEST option
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: vendor-prefixes: add ScioSense
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad9739a: drop COMPILE_TEST option
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH] iio: dac: ad9739a: drop COMPILE_TEST option
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: adi-axi-adc: make sure DRP is locked on enable
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v3 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings:iio:proximity: Add hx9023s binding
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• [PATCH v3 0/2] iio-proximity-hx9023s-Add-TYHX-HX9023S-sensor-driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: iio: chemical: add ENS160 sensor
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v2 6/6] MAINTAINERS: Add ScioSense ENS160
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v2 5/6] iio: chemical: ens160: add power management support
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v2 4/6] iio: chemical: ens160: add triggered buffer support
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v2 3/6] iio: chemical: add driver for ENS160 sensor
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: iio: chemical: add ENS160 sensor
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: vendor-prefixes: add ScioSense
  • From: Gustavo Silva <gustavograzs@xxxxxxxxx>
• [PATCH] staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
  • From: linux@xxxxxxxxxxx
• Re: [PATCH v2 0/6] minor fixes and improvements
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: add ti,ads1119
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/3] clk: sunxi-ng: h616: Add clock/reset for GPADC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] clk: sunxi-ng: h616: Add clock/reset for GPADC
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: iio: imu: Add ADIS16545/47 compatibles
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: add ti,ads1119
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: chemical: ams-iaq-core: clean up codestyle warning
  • From: Bruna Bispo <blbispo1@xxxxxxxxx>
• [PATCH v2 6/6] docs: iio: add documentation for adis16480 driver
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 5/6] docs: iio: add documentation for interfacing tools
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 4/6] iio: adis16480: add support for adis16545/7 families
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: iio: imu: Add ADIS16545/47 compatibles
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 2/6] iio: imu: adis16480.c: Add delta angle and delta velocity channels
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 1/6] iio: adis16480: make the burst_max_speed configurable
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v2 0/6] Add support for adis16545/47
  • From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
• [PATCH v7 7/7] iio: adc: ad7380: add support for ad738x-4 4 channels variants
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 5/7] iio: adc: ad7380: prepare for parts with more channels
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 6/7] dt-bindings: iio: adc: ad7380: add support for ad738x-4 4 channels variants
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 4/7] iio: adc: ad7380: add support for pseudo-differential parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 2/7] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 3/7] dt-bindings: iio: adc: ad7380: add pseudo-differential parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 0/7] iio: adc: add new ad7380 driver
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 1/7] dt-bindings: iio: adc: Add binding for AD7380 ADCs
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: adc: ad7173: add support for ad411x
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• [PATCH] iio: dac: ad9739a: drop COMPILE_TEST option
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Arthur Becker <arthur.becker@xxxxxxxxxx>
• Re: [EXTERNAL]Re: [PATCH v3 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
  • From: Arthur Becker <arthur.becker@xxxxxxxxxx>
• RE: [PATCH v2 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• [PATCH] iio: imu: inv_icm42600: delete unneeded update watermark call
  • From: inv.git-commit@xxxxxxx
• [PATCH v1 17/17] iio: chemical: bme680: Refactorize reading functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 16/17] iio: chemical: bme680: Move forced mode setup in ->read_raw()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 15/17] iio: chemical: bme680: Remove redundant gas configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 14/17] iio: chemical: bme680: Modify startup procedure
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 13/17] iio: chemical: bme680: Add read buffers in DMA safe region
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 12/17] iio: chemical: bme680: Allocate IIO device before chip initialization
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 11/17] iio: chemical: bme680: Use bulk reads for calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>