This reversed if statement means that the function just returns success
without writing to the registers.
Fixes: 16531118ba63 ("iio: bmi323: peripheral in lowest power state on suspend")
Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
---
v2: Added the dev_err() message
drivers/iio/imu/bmi323/bmi323_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/imu/bmi323/bmi323_core.c b/drivers/iio/imu/bmi323/bmi323_core.c
index f6ff07ba98cd..527d6c321ab3 100644
--- a/drivers/iio/imu/bmi323/bmi323_core.c
+++ b/drivers/iio/imu/bmi323/bmi323_core.c
@@ -2226,8 +2226,10 @@ static int bmi323_core_runtime_resume(struct device *dev)
* after being reset in the lower power state by runtime-pm.
*/
ret = bmi323_init(data);
- if (!ret)
+ if (ret) {
+ dev_err(data->dev, "Device power-on and init failed: %d", ret);
return ret;
+ }
/* Register must be cleared before changing an active config */
ret = regmap_write(data->regmap, BMI323_FEAT_IO0_REG, 0);
--
2.45.2
