[PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



TI's opt3002 light sensor shares most properties with the opt3001
model, with the exception of supporting a wider spectrum range.

Add support for TI's opt3002 by extending the TI opt3001 driver.

Datasheet: https://www.ti.com/product/OPT3002
Signed-off-by: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
---
 drivers/iio/light/Kconfig   |   2 +-
 drivers/iio/light/opt3001.c | 189 ++++++++++++++++++++++++++++++++++++--------
 2 files changed, 157 insertions(+), 34 deletions(-)

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index b68dcc1fbaca..c35bf962dae6 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -461,7 +461,7 @@ config OPT3001
 	depends on I2C
 	help
 	  If you say Y or M here, you get support for Texas Instruments
-	  OPT3001 Ambient Light Sensor.
+	  OPT3001 Ambient Light Sensor, OPT3002 Light-to-Digital Sensor.
 
 	  If built as a dynamically linked module, it will be called
 	  opt3001.
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 176e54bb48c3..ff7fc0d4b08f 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -70,6 +70,35 @@
 #define OPT3001_RESULT_READY_SHORT	150
 #define OPT3001_RESULT_READY_LONG	1000
 
+struct opt3001_scale {
+	int	val;
+	int	val2;
+};
+
+struct opt3001_chip_info {
+	const struct iio_chan_spec (*channels)[2];
+	enum iio_chan_type chan_type;
+	int num_channels;
+
+	const struct opt3001_scale (*scales)[12];
+	/*
+	 * Factor as specified by conversion equation in datasheet.
+	 * eg. 0.01 (scaled to integer 10) for opt3001.
+	 */
+	int factor_whole;
+	/*
+	 * Factor to compensate for potentially scaled factor_whole.
+	 */
+	int factor_integer;
+	/*
+	 * Factor used to align decimal part of proccessed value to six decimal
+	 * places.
+	 */
+	int factor_decimal;
+
+	bool has_id;
+};
+
 struct opt3001 {
 	struct i2c_client	*client;
 	struct device		*dev;
@@ -79,6 +108,7 @@ struct opt3001 {
 	bool			result_ready;
 	wait_queue_head_t	result_ready_queue;
 	u16			result;
+	const struct opt3001_chip_info *chip_info;
 
 	u32			int_time;
 	u32			mode;
@@ -92,11 +122,6 @@ struct opt3001 {
 	bool			use_irq;
 };
 
-struct opt3001_scale {
-	int	val;
-	int	val2;
-};
-
 static const struct opt3001_scale opt3001_scales[] = {
 	{
 		.val = 40,
@@ -148,21 +173,68 @@ static const struct opt3001_scale opt3001_scales[] = {
 	},
 };
 
+static const struct opt3001_scale opt3002_scales[] = {
+	{
+		.val = 4914,
+		.val2 = 0,
+	},
+	{
+		.val = 9828,
+		.val2 = 0,
+	},
+	{
+		.val = 19656,
+		.val2 = 0,
+	},
+	{
+		.val = 39312,
+		.val2 = 0,
+	},
+	{
+		.val = 78624,
+		.val2 = 0,
+	},
+	{
+		.val = 157248,
+		.val2 = 0,
+	},
+	{
+		.val = 314496,
+		.val2 = 0,
+	},
+	{
+		.val = 628992,
+		.val2 = 0,
+	},
+	{
+		.val = 1257984,
+		.val2 = 0,
+	},
+	{
+		.val = 2515968,
+		.val2 = 0,
+	},
+	{
+		.val = 5031936,
+		.val2 = 0,
+	},
+	{
+		.val = 10063872,
+		.val2 = 0,
+	},
+};
+
 static int opt3001_find_scale(const struct opt3001 *opt, int val,
 		int val2, u8 *exponent)
 {
 	int i;
-
-	for (i = 0; i < ARRAY_SIZE(opt3001_scales); i++) {
-		const struct opt3001_scale *scale = &opt3001_scales[i];
-
+	for (i = 0; i < ARRAY_SIZE(*opt->chip_info->scales); i++) {
+		const struct opt3001_scale *scale = &(*opt->chip_info->scales)[i];
 		/*
-		 * Combine the integer and micro parts for comparison
-		 * purposes. Use milli lux precision to avoid 32-bit integer
-		 * overflows.
+		 * Compare the integer and micro parts to determine value scale.
 		 */
-		if ((val * 1000 + val2 / 1000) <=
-				(scale->val * 1000 + scale->val2 / 1000)) {
+		if (val < scale->val ||
+		    (val == scale->val && val2 <= scale->val2)) {
 			*exponent = i;
 			return 0;
 		}
@@ -174,11 +246,14 @@ static int opt3001_find_scale(const struct opt3001 *opt, int val,
 static void opt3001_to_iio_ret(struct opt3001 *opt, u8 exponent,
 		u16 mantissa, int *val, int *val2)
 {
-	int lux;
+	int ret;
+	int whole = opt->chip_info->factor_whole;
+	int integer = opt->chip_info->factor_integer;
+	int decimal = opt->chip_info->factor_decimal;
 
-	lux = 10 * (mantissa << exponent);
-	*val = lux / 1000;
-	*val2 = (lux - (*val * 1000)) * 1000;
+	ret = whole * (mantissa << exponent);
+	*val = ret / integer;
+	*val2 = (ret - (*val * integer)) * decimal;
 }
 
 static void opt3001_set_mode(struct opt3001 *opt, u16 *reg, u16 mode)
@@ -225,7 +300,18 @@ static const struct iio_chan_spec opt3001_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(1),
 };
 
-static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
+static const struct iio_chan_spec opt3002_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_INT_TIME),
+		.event_spec = opt3001_event_spec,
+		.num_event_specs = ARRAY_SIZE(opt3001_event_spec),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int opt3001_get_processed(struct opt3001 *opt, int *val, int *val2)
 {
 	int ret;
 	u16 mantissa;
@@ -397,14 +483,15 @@ static int opt3001_read_raw(struct iio_dev *iio,
 	if (opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS)
 		return -EBUSY;
 
-	if (chan->type != IIO_LIGHT)
+	if (chan->type != opt->chip_info->chan_type)
 		return -EINVAL;
 
 	mutex_lock(&opt->lock);
 
 	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
 	case IIO_CHAN_INFO_PROCESSED:
-		ret = opt3001_get_lux(opt, val, val2);
+		ret = opt3001_get_processed(opt, val, val2);
 		break;
 	case IIO_CHAN_INFO_INT_TIME:
 		ret = opt3001_get_int_time(opt, val, val2);
@@ -428,7 +515,7 @@ static int opt3001_write_raw(struct iio_dev *iio,
 	if (opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS)
 		return -EBUSY;
 
-	if (chan->type != IIO_LIGHT)
+	if (chan->type != opt->chip_info->chan_type)
 		return -EINVAL;
 
 	if (mask != IIO_CHAN_INFO_INT_TIME)
@@ -479,6 +566,9 @@ static int opt3001_write_event_value(struct iio_dev *iio,
 {
 	struct opt3001 *opt = iio_priv(iio);
 	int ret;
+	int whole;
+	int integer;
+	int decimal;
 
 	u16 mantissa;
 	u16 value;
@@ -497,7 +587,12 @@ static int opt3001_write_event_value(struct iio_dev *iio,
 		goto err;
 	}
 
-	mantissa = (((val * 1000) + (val2 / 1000)) / 10) >> exponent;
+	whole = opt->chip_info->factor_whole;
+	integer = opt->chip_info->factor_integer;
+	decimal = opt->chip_info->factor_decimal;
+
+	mantissa = (((val * integer) + (val2 / decimal)) / whole) >> exponent;
+
 	value = (exponent << 12) | mantissa;
 
 	switch (dir) {
@@ -610,7 +705,7 @@ static int opt3001_read_id(struct opt3001 *opt)
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_DEVICE_ID);
 	if (ret < 0) {
 		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_DEVICE_ID);
+			OPT3001_DEVICE_ID);
 		return ret;
 	}
 
@@ -692,6 +787,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 	struct opt3001 *opt = iio_priv(iio);
 	int ret;
 	bool wake_result_ready_queue = false;
+	enum iio_chan_type chan_type = opt->chip_info->chan_type;
 
 	if (!opt->ok_to_ignore_lock)
 		mutex_lock(&opt->lock);
@@ -707,13 +803,13 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 			OPT3001_CONFIGURATION_M_CONTINUOUS) {
 		if (ret & OPT3001_CONFIGURATION_FH)
 			iio_push_event(iio,
-					IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+					IIO_UNMOD_EVENT_CODE(chan_type, 0,
 							IIO_EV_TYPE_THRESH,
 							IIO_EV_DIR_RISING),
 					iio_get_time_ns(iio));
 		if (ret & OPT3001_CONFIGURATION_FL)
 			iio_push_event(iio,
-					IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+					IIO_UNMOD_EVENT_CODE(chan_type, 0,
 							IIO_EV_TYPE_THRESH,
 							IIO_EV_DIR_FALLING),
 					iio_get_time_ns(iio));
@@ -755,22 +851,25 @@ static int opt3001_probe(struct i2c_client *client)
 	opt = iio_priv(iio);
 	opt->client = client;
 	opt->dev = dev;
+	opt->chip_info = i2c_get_match_data(client);
 
 	mutex_init(&opt->lock);
 	init_waitqueue_head(&opt->result_ready_queue);
 	i2c_set_clientdata(client, iio);
 
-	ret = opt3001_read_id(opt);
-	if (ret)
-		return ret;
+	if (opt->chip_info->has_id) {
+		ret = opt3001_read_id(opt);
+		if (ret)
+			return ret;
+	}
 
 	ret = opt3001_configure(opt);
 	if (ret)
 		return ret;
 
 	iio->name = client->name;
-	iio->channels = opt3001_channels;
-	iio->num_channels = ARRAY_SIZE(opt3001_channels);
+	iio->channels = *opt->chip_info->channels;
+	iio->num_channels = opt->chip_info->num_channels;
 	iio->modes = INDIO_DIRECT_MODE;
 	iio->info = &opt3001_info;
 
@@ -825,14 +924,38 @@ static void opt3001_remove(struct i2c_client *client)
 	}
 }
 
+static const struct opt3001_chip_info opt3001_chip_information = {
+	.channels = &opt3001_channels,
+	.chan_type = IIO_LIGHT,
+	.num_channels = ARRAY_SIZE(opt3001_channels),
+	.scales = &opt3001_scales,
+	.factor_whole = 10,
+	.factor_integer = 1000,
+	.factor_decimal = 1000,
+	.has_id = true,
+};
+
+static const struct opt3001_chip_info opt3002_chip_information = {
+	.channels = &opt3002_channels,
+	.chan_type = IIO_INTENSITY,
+	.num_channels = ARRAY_SIZE(opt3002_channels),
+	.scales = &opt3002_scales,
+	.factor_whole = 12,
+	.factor_integer = 10,
+	.factor_decimal = 100000,
+	.has_id = false,
+};
+
 static const struct i2c_device_id opt3001_id[] = {
-	{ "opt3001" },
+	{ "opt3001", (kernel_ulong_t)&opt3001_chip_information },
+	{ "opt3002", (kernel_ulong_t)&opt3002_chip_information },
 	{ } /* Terminating Entry */
 };
 MODULE_DEVICE_TABLE(i2c, opt3001_id);
 
 static const struct of_device_id opt3001_of_match[] = {
-	{ .compatible = "ti,opt3001" },
+	{ .compatible = "ti,opt3001", .data = &opt3001_chip_information },
+	{ .compatible = "ti,opt3002", .data = &opt3002_chip_information },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, opt3001_of_match);

-- 
2.39.2





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux