If i2c_smbus_write_byte_data() fails in al3010_init(), al3010_set_pwr(false) is not called. In order to avoid such a situation, move the devm_add_action_or_reset() witch calls al3010_set_pwr(false) right after a successful al3010_set_pwr(true). Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> --- Compile tested only. This patch is speculative, review with care --- drivers/iio/light/al3010.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c index 53569587ccb7..7cbb8b203300 100644 --- a/drivers/iio/light/al3010.c +++ b/drivers/iio/light/al3010.c @@ -87,7 +87,12 @@ static int al3010_init(struct al3010_data *data) int ret; ret = al3010_set_pwr(data->client, true); + if (ret < 0) + return ret; + ret = devm_add_action_or_reset(&data->client->dev, + al3010_set_pwr_off, + data); if (ret < 0) return ret; @@ -190,12 +195,6 @@ static int al3010_probe(struct i2c_client *client) return ret; } - ret = devm_add_action_or_reset(&client->dev, - al3010_set_pwr_off, - data); - if (ret < 0) - return ret; - return devm_iio_device_register(&client->dev, indio_dev); } -- 2.46.0