On Fri, 13 Sep 2024 16:57:35 +0300 Alexandru Ardelean <aardelean@xxxxxxxxxxxx> wrote: > The AD7606C-16 and AD7606C-18 are pretty similar with the AD7606B. > The main difference between AD7606C-16 & AD7606C-18 is the precision in > bits (16 vs 18). > Because of that, some scales need to be defined for the 18-bit variants, as > they need to be computed against 2**18 (vs 2**16 for the 16 bit-variants). > > Because the AD7606C-16,18 also supports bipolar & differential channels, > for SW-mode, the default range of 10 V or ±10V should be set at probe. > On reset, the default range (in the registers) is set to value 0x3 which > corresponds to '±10 V single-ended range', regardless of bipolar or > differential configuration. > > Aside from the scale/ranges, the AD7606C-16 is similar to the AD7606B. > > This changeset, does a bit of rework to the existing ad7606 driver and then > adds support for the AD7606C-16 & AD7606C-18 parts. Other than the issue the bot found this looks good to me. Will let it sit on list a little while though for others to reviews, Jonathan