On Fri, 13 Sep 2024 11:57:02 +0200 Emil Gedenryd <emil.gedenryd@xxxxxxxx> wrote: > The opt3001 driver uses predetermined full-scale range values to > determine what exponent to use for event trigger threshold values. > The problem is that one of the values specified in the datasheet is > missing from the implementation. This causes larger values to be > scaled down to an incorrect exponent, effectively reducing the > maximum settable threshold value by a factor of 2. > > Add missing full-scale range array value. > > Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") > Signed-off-by: Emil Gedenryd <emil.gedenryd@xxxxxxxx> Applied to the fixes-togreg branch of iio.git and marked for stable. I'll probably send a pull request with this in shortly after rc1. Jonathan > --- > drivers/iio/light/opt3001.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c > index 887c4b776a86..176e54bb48c3 100644 > --- a/drivers/iio/light/opt3001.c > +++ b/drivers/iio/light/opt3001.c > @@ -138,6 +138,10 @@ static const struct opt3001_scale opt3001_scales[] = { > .val = 20966, > .val2 = 400000, > }, > + { > + .val = 41932, > + .val2 = 800000, > + }, > { > .val = 83865, > .val2 = 600000, >