Hello, The first patch adds support for configuring the Sampling frequency of the sensor. The available values for the sampling freqeuncy are provided by the `read_avail` callback and they are in miliHertz. Then the second patch adds support for suspending and resuming the sensor by providing the necessary callbacks. And registering the ops with the driver. The third patch in the series adds support for Threshold events and interrupts. Exposed rising and falling threshold events for both the channels. The events can be configured via the write_event_config callback. The desired rising or falling threshold value can be written to from userspace. The fourth patch adds support for threshold interrupt persistance. It triggers when the UVS/ALS data is out of thresholds for a specific number of consecutive measurements. Exposed the IIO_EV_INFO_PERIOD attribute by which userspace can set the persistance value in miliseconds. The persistance period should be greater than or equal to the sampling period. Changes in v3: - Replace hardcoded mask values with GENMASK() - Minor refactoring - Code formatting changes Changes in v2: - Added "linux/irq.h" include to fix `-Wimplicit-function-declaration`. - The above error was pointed during testing by kernel-test-robot Thanks, Abhash Abhash Jha (4): iio: light: ltr390: Added configurable sampling frequency support iio: light: ltr390: Suspend and Resume support iio: light: ltr390: Interrupts and threshold event support iio: light: ltr390: Add interrupt persistance support drivers/iio/light/ltr390.c | 361 ++++++++++++++++++++++++++++++++++++- 1 file changed, 357 insertions(+), 4 deletions(-) -- 2.43.0
