Linux IIO Development

• Thread Index

• Re: [PATCH V2] iio: adc: Add Renesas GyroADC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH V2] iio: adc: Add Renesas GyroADC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH V2] iio: adc: Add Renesas GyroADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH V2] iio: adc: Add Renesas GyroADC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v4] iio:temperature: Add support for TI TMP007 sensor
  • From: Manivannan Sadhasivam <manivannanece23@xxxxxxxxx>
• Re: [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH v3] iio:temperature: Add support for TI TMP007 sensor
  • From: Mani Sadhasivam <manivannanece23@xxxxxxxxx>
• Re: Problems with using IIO buffers
  • From: Matthias Klumpp <matthias@xxxxxxxxxxxx>
• [PATCH V2] iio: adc: Add Renesas GyroADC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v7 00/12] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 05/12] mux: support simplified bindings for single-user gpio mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 03/12] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] iio:adc:qcom-spmi-vadc: use div64_s64 instead of direct 64 bit division.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] guessing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] guessing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: max5481: Add support for Maxim digital potentiometers
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [iio:testing 56/57] drivers/iio/adc/qcom-spmi-vadc.c:667:3: note: in expansion of macro 'do_div'
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio:adc:qcom-spmi-vadc : fix undefined __divdi3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 14/22] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/11] iio:kfifo_buf header include push down.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/22] power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/22] dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 6/8] IIO: add STM32 timer trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/22] power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/8] IIO: add bindings for STM32 timer trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio:adc:qcom-spmi-vadc silence a long constant warning.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:adc:qcom-spmi-vadc : fix undefined __divdi3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 14/22] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 14/22] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio:temperature: Add support for TI TMP007 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 00/12] mux controller abstraction and iio/i2c muxes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 10/12] i2c: i2c-mux-simple: new driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 12/12] mux: adg792a: add mux controller driver for ADG792A/G
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 11/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 05/12] mux: support simplified bindings for single-user gpio mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 07/12] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 04/12] dt-bindings: simplified bindings for single-user gpio mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 03/12] mux: minimal mux subsystem and gpio-based mux controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: adc: imx25-gcq: Fix module autoload
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/11] iio:buffer: Push implementation of iio_device_attach_buffer into .c file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 01/12] devres: trivial whitespace fix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: adc: tlc4541: add support for TI tlc4541 adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio:addac Fixes Alignment should match open parenthesis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 09/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 19/19] staging: iio: isl29028: remove legacy device tree binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/19] staging: iio: isl29028: remove enable flag from isl29028_enable_proximity()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: Add channel for Gravity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: Add linear accel sensor hid support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 14/19] staging: iio: isl29028: move failure logging into isl29028_set_als_scale()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/19] staging: iio: isl29028: made column alignment in isl29028_channels consistent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/19] staging: iio: isl29028: move failure logging into isl29028_set_proxim_sampling()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 19/19] staging: iio: isl29028: remove legacy device tree binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/19] staging: iio: isl29028: made alignment of #defines consistent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/19] staging: iio: isl29028: add power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/19] staging: iio: isl29028: remove chip test and defaults from isl29028_chip_init()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/19] staging: iio: isl29028: remove enable flag from isl29028_enable_proximity()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: max5481: Add support for Maxim digital potentiometers
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 00/11] buffer.h cleanup and split
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: st_accel: handle deprecated bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: max5481: Add support for Maxim digital potentiometers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: max5481: Add support for Maxim digital potentiometers
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] iio:trigger: Fix coding style in iio-trig-bfin-timer.c by removing a waring flagged by checkpatch.pl
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:trigger: Fix coding style in iio-trig-bfin-timer.c by removing a waring flagged by checkpatch.pl
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Fixed a coding style issue as a part of Eudyptula Challenge
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH] iio:trigger: Fix coding style in iio-trig-bfin-timer.c by removing a waring flagged by checkpatch.pl
  • From: rishabh hardas <rishabheudyptula@xxxxxxxxx>
• [PATCH] adc: add adc driver for Hisilicon BVT SOCs
  • From: Allen Liu <liurenzhong@xxxxxxxxxxxxx>
• Re: [PATCH] Fixed a coding style issue as a part of Eudyptula Challenge
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 17/22] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] Fixed a coding style issue as a part of Eudyptula Challenge
  • From: rishabh hardas <rishabheudyptula@xxxxxxxxx>
• Re: [PATCH v7 0/8] Add PWM and IIO timer drivers for STM32
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH 17/22] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 17/22] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v3] iio:temperature: Add support for TI TMP007 sensor
  • From: Mani Sadhasivam <manivannanece23@xxxxxxxxx>
• Re: [PATCH 01/22] dt-bindings: iio: adc: add AXP20X/AXP22X ADC DT binding
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 17/22] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v5 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v5 0/2] iio: adc: hx711: Add IIO driver for AVIA HX711 ADC
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 17/22] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] iio:temperature: Add support for TI TMP007 sensor
  • From: Mani Sadhasivam <manivannanece23@xxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v7 05/12] mux: support simplified bindings for single-user gpio mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 0/8] Add PWM and IIO timer drivers for STM32
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio: accel: st_accel: handle deprecated bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/22] ARM: dtsi: axp209: add AXP209 ADC subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] iio: adc: tlc4541: add support for TI tlc4541 adc
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v7 5/8] IIO: add bindings for STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 1/8] MFD: add bindings for STM32 Timers driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 2/8] MFD: add STM32 Timers driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 6/8] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 4/8] PWM: add PWM driver for STM32 plaftorm
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 8/8] ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 3/8] PWM: add pwm-stm32 DT bindings
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v7 0/8] Add PWM and IIO timer drivers for STM32
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: adc: tlc4541: add support for TI tlc4541 adc
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 05/22] ARM: dtsi: axp209: add AXP209 ADC subnode
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH] iio:temperature: Add support for TI TMP007 sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 15/22] mfd: axp20x: add CHRG_CTRL1 to writeable regs for AXP20X/AXP22X
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 04/22] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 05/22] ARM: dtsi: axp209: add AXP209 ADC subnode
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 06/22] ARM: dtsi: axp22x: add AXP22X ADC subnode
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 16/22] mfd: axp20x: add V_OFF to writeable regs for AXP20X and AXP22X
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 15/22] mfd: axp20x: add CHRG_CTRL1 to writeable regs for AXP20X/AXP22X
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 07/22] dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 02/22] mfd: axp20x: add ADC data regs to volatile regs for AXP22X
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 01/22] dt-bindings: iio: adc: add AXP20X/AXP22X ADC DT binding
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• [PATCH] iio:temperature: Add support for TI TMP007 sensor
  • From: Mani Sadhasivam <manivannanece23@xxxxxxxxx>
• [PATCH v2 2/2] iio: Add linear accel sensor hid support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH v2 1/2] iio: Add support for linear accel
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH v3 2/2] iio: Add gravity sensor support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH v3 1/2] iio: Add channel for Gravity
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH V2] docs: IIO documentation sphinx conversion
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PATCH v5 4/5] iio: light: lm3533-als: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v5 3/5] backlight: lm3533: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v5 1/5] devicetree: mfd: Add binding for the TI LM3533
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v5 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 00/11] buffer.h cleanup and split
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 04/22] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 07/22] dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 14/22] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 16/22] mfd: axp20x: add V_OFF to writeable regs for AXP20X and AXP22X
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 15/22] mfd: axp20x: add CHRG_CTRL1 to writeable regs for AXP20X/AXP22X
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 09/22] mfd: axp20x: add AC power supply cells for AXP22X PMICs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v7 06/12] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 07/12] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 01/12] devres: trivial whitespace fix
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 09/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 00/12] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 10/12] i2c: i2c-mux-simple: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 05/12] mux: support simplified bindings for single-user gpio mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 11/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 12/12] mux: adg792a: add mux controller driver for ADG792A/G
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 08/12] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 02/12] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 04/12] dt-bindings: simplified bindings for single-user gpio mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v7 03/12] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 18/22] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 04/22] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 02/22] mfd: axp20x: add ADC data regs to volatile regs for AXP22X
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v9 2/3] mfd: Kconfig: MFD_SUN4I_GPADC depends on !TOUCHSCREN_SUN4I_GPADC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v11 5/5] mfd: Move binding document
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v11 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/2] staging: iio: ad7606: move out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• RE: [PATCH 1/2] iio: Add support for linear accel
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• [PATCH] staging:iio:addac Fixes Alignment should match open parenthesis
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• Re: [PATCH 01/22] dt-bindings: iio: adc: add AXP20X/AXP22X ADC DT binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: max5481: Add support for Maxim digital potentiometers
  • From: Matthew Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] mfd: cros_ec: Add activity motion sense definitions
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: Add support for linear accel
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] iio: Add support for linear accel
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• RE: [PATCH 1/2] iio: Add support for linear accel
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• Re: [PATCH 1/2] iio: Add support for linear accel
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 2/2] iio: Add linear accel sensor hid support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 1/2] iio: Add support for linear accel
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2 2/2] iio: Add gravity sensor support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH v2 1/2] iio: Add channel for Gravity
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 04/22] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 00/22] add support for AXP20X and AXP22X power supply drivers
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 06/22] ARM: dtsi: axp22x: add AXP22X ADC subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: misc: add support for GPIO power switches
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 05/22] ARM: dtsi: axp209: add AXP209 ADC subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 07/22] dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 01/22] dt-bindings: iio: adc: add AXP20X/AXP22X ADC DT binding
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/22] power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 10/22] ARM: dtsi: axp209: add AC power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 09/22] mfd: axp20x: add AC power supply cells for AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 11/22] ARM: dtsi: axp22x: add AC power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 12/22] ARM: dts: sun8i: sina33: enable ACIN power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 13/22] ARM: sun5i: chip: enable ACIN power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 01/11] iio:buffer: Stop exporting iio_update_demux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/11] buffer.h cleanup and split
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/11] iio:buffer.h Reformat structure comments to be inline.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/11] iio:buffer: Introduced a function to assign the buffer specific attrs.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/11] iio:buffer: Stop exporting iio_scan_mask_query
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/11] iio:kfifo_buf header include push down.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/11] iio:buffers: Push some docs down into the .c file.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/11] iio:buffer:iio_push_to_buffers_with_timestamp fix kernel-doc.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/11] iio:buffer.h include pushdown into buffer implementations
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/11] iio:buffer: Push implementation of iio_device_attach_buffer into .c file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/11] iio:dummy: Stop enabling timestamp by default.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/11] iio:buffer.h - split into buffer.h and buffer_impl.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 14/22] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 22/22] ARM: sun5i: chip: enable battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 21/22] ARM: dts: sun8i: sina33: enable battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 20/22] ARM: dtsi: axp22x: add battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 18/22] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] staging: iio: ad7606: move out of staging
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 19/22] ARM: dtsi: axp209: add battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 17/22] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 16/22] mfd: axp20x: add V_OFF to writeable regs for AXP20X and AXP22X
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 15/22] mfd: axp20x: add CHRG_CTRL1 to writeable regs for AXP20X/AXP22X
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/22] mfd: axp20x: add ADC data regs to volatile regs for AXP22X
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL] First round of IIO fixes for the 4.10 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 7/9] i2c: i2c-mux-simple: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] HID: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH] iio: adc: imx25-gcq: Fix module autoload
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v6 7/9] i2c: i2c-mux-simple: new driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH V2] docs: IIO documentation sphinx conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/9] mux controller abstraction and iio/i2c muxes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 7/9] i2c: i2c-mux-simple: new driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 5/9] iio: multiplexer: new iio category and iio-mux driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/9] iio: inkern: api for manipulating ext_info of iio channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] devicetree: add Garmin vendor prefix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First round of IIO fixes for the 4.10 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: st_accel: fix LIS3LV02 reading and scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: common: st_sensors: fix channel data parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] devicetree: add Garmin vendor prefix
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCH] iio: accel: st_accel: fix LIS3LV02 reading and scaling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v2] iio: common: st_sensors: fix channel data parsing
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] Revert "iio:st_sensors: align on storagebits boundaries"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 2/8] MFD: add STM32 Timers driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 8/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: hid-sensor-attributes: Add input sample frequency check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: Add support for max_sampling_frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] devicetree: add Garmin vendor prefix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: max44000: correct value in illuminance_integration_time_available
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: mxs-lradc: fix error handling in mxs_lradc_probe()
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v3 2/2] staging: iio: ad7606: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: Add Renesas GyroADC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH] iio: mxs-lradc: fix error handling in mxs_lradc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3 v2] iio: adc: break out common code from SPMI VADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv4 8/8] Fixes style issues due to mis-aligned carry over lines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv4 7/8] Changed code to align with coding style of using octat
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv4 6/8] Fixed code wrap alignment with preceding (.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv4 4/8] Fix braces not present on all arms of if else statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv4 4/8] Fix braces not present on all arms of if else statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv4 3/8] Fix camel case issues
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv4 1/8] fixed long description text exceeding 80 characters
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: staging: iio: cdc: fix return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dummy: No semicolon at end of function definition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Problems with using IIO buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Revert "iio:st_sensors: align on storagebits boundaries"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio:adc:qcom-spmi-vadc silence a long constant warning.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio:adc:qcom-spmi-vadc : fix undefined __divdi3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
• [PATCH] Revert "iio:st_sensors: align on storagebits boundaries"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] iio: Add gravity sensor support
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: ad5592r: Add ACPI support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: light: add DT bindings for Capella CM3605
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: light: add driver for Capella CM3605
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: hid-sensor-als: Add duplicate IIO_LIGHT channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: imu: add support to lsm6dsx driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: misc: add support for GPIO power switches
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: misc: add support for GPIO power switches
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_pressure: Export sampling frequency for lps25h and lps331ap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_pressure: Fix data sign
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] iio: bmi160: Support hardware fifo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: bmi160: Fix time needed to sleep after command execution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: bmi160: Fix time needed to sleep after command execution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] iio: bmi160: Add of device table for i2c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/6] iio: bmi160: Protect data transmission with mutex
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] Documentation: DT: Add bmi160 imu binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] iio: Add gravity sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/2] iio: Add channel for Gravity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/4] iio: hid: Expose sensors max_sample_frequency nodes
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 3/4] iio: hid-sensor-attributes: Add input sample frequency check
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 2/4] iio: hid-sensors: API add max_sample_frequency
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 1/4] iio: Add support for max_sampling_frequency
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: misc: add support for GPIO power switches
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v2 2/2] iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCH v2 1/2] devicetree: add Garmin vendor prefix
  • From: Matt Ranostay <matt@ranostay.consulting>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• [PATCH] iio: max44000: correct value in illuminance_integration_time_available
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 3/8] DT:omap3+tsc2007: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 2/8] drivers:input:tsc2007: check for presence and power down tsc2007 during probe
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 8/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 7/8] DT:omap3+ads7846: use new common touchscreen bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 4/8] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v9 5/8] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: misc: add support for GPIO power switches
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: [PATCH v11 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] backlight: lm3533: Support initialization from Device Tree
  • From: "Jingoo Han" <jingoohan1@xxxxxxxxx>
• [PATCH] HID: sensor-hub: Move the memset to sensor_hub_get_feature()
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] backlight: lm3533: Support initialization from Device Tree
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 3/5] backlight: lm3533: Support initialization from Device Tree
  • From: Pavel Machek <pavel@xxxxxx>
• Regression in hid-sensor-hub
  • From: Rann Bar-On <rann@xxxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/3 v2] iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v4 3/5] backlight: lm3533: Support initialization from Device Tree
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] iio: mxs-lradc: fix error handling in mxs_lradc_probe()
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• RE: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
  • From: liurenzhong <liurenzhong@xxxxxxxxxxxxx>
• Re: [PATCHv4 2/8] Fixed variables not being consistently lower case
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv4 2/8] Fixed variables not being consistently lower case
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv4 8/8] Fixes style issues due to mis-aligned carry over lines
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv4 3/8] Fix camel case issues
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv4 7/8] Changed code to align with coding style of using octat
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv4 2/8] Fixed variables not being consistently lower case
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv4 2/8] Fixed variables not being consistently lower case
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• [PATCHv4 2/8] Fixed variables not being consistently lower case
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 3/8] Fix camel case issues
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 4/8] Fix braces not present on all arms of if else statement
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 5/8] Remove line after closing braces
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 8/8] Fixes style issues due to mis-aligned carry over lines
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 7/8] Changed code to align with coding style of using octat
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 6/8] Fixed code wrap alignment with preceding (.
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 1/8] fixed long description text exceeding 80 characters
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 0/8] Checkpatch fixes to driver/staging/iio/addac
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 3/8] Fix camel case issues
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 2/8] Fixed variables not being consistently lower case
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 4/8] Fix braces not present on all arms of if else statement
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 7/8] Changed code to align with coding style of using octat
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 5/8] Remove line after closing braces
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 1/8] fixed long description text exceeding 80 characters
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• [PATCHv4 0/8] Checkpatch fixes to driver/staging/iio/addac
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• Re: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
  • From: Jiancheng Xue <xuejiancheng@xxxxxxxxxxxxx>
• [PATCH] adc: add adc driver for Hisilicon BVT SOCs
  • From: Allen Liu <liurenzhong@xxxxxxxxxxxxx>
• [PATCH] iio: mxs-lradc: fix error handling in mxs_lradc_probe()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• [PATCH] drivers: staging: iio: cdc: fix return value
  • From: Thomas Preisner <thomas.preisner+linux@xxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] indention and space fixes to align with linux style
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] indention and space fixes to align with linux style
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH libiio] iio-monitor: Set locale before parsing double values from sysfs
  • From: "Cercueil, Paul" <Paul.Cercueil@xxxxxxxxxx>
• Re: [PATCH libiio] iio-monitor: Add support for current and power
  • From: "Cercueil, Paul" <Paul.Cercueil@xxxxxxxxxx>
• [PATCH v4 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v4 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v4 0/2] iio: adc: hx711: Add IIO driver for AVIA HX711 ADC
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH libiio] iio-monitor: Add support for current and power
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH libiio] iio-monitor: Set locale before parsing double values from sysfs
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] Documentation: DT: bindings: iio: adc: add documentation for Allwinner SoCs' GPADC driver
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] indention and space fixes to align with linux style
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• Re: [PATCH] indention and space fixes to align with linux style
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] indention and space fixes to align with linux style
  • From: Scott Matheina <scott@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Problems with using IIO buffers
  • From: Matthias Klumpp <matthias@xxxxxxxxxxxx>
• [PATCH] iio: dummy: No semicolon at end of function definition
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: Problems with using IIO buffers
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/7] Documentation: DT: bindings: iio: adc: add documentation for Allwinner SoCs' GPADC driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] Documentation: DT: bindings: mfd: add documentation for Allwinner SoCs' GPADC MFD driver
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] Documentation: DT: bindings: iio: adc: add documentation for Allwinner SoCs' GPADC driver
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: Problems with using IIO buffers
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 6/7] ARM: dtsi: sun8i-a33: add A33 thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/7] ARM: dts: sun8i-a33-sinlinx-sina33: add cpu-supply
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/7] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/7] Documentation: DT: bindings: iio: adc: add documentation for Allwinner SoCs' GPADC driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: dtsi: sun8i-a33: add CPU thermal throttling
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/7] ARM: dts: sun8i-a33-olinuxino: add cpu-supply
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/7] add CPU thermal throttling to Allwinner A33 SoC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/7] Documentation: DT: bindings: mfd: add documentation for Allwinner SoCs' GPADC MFD driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Problems with using IIO buffers
  • From: Matthias Klumpp <matthias@xxxxxxxxxxxx>
• Re: [PATCH 1/3 v2] iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: core: Add double tap as possible gesture
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/2] iio: dac: ad5593r: Add ACPI support
  • From: <michael.hennerich@xxxxxxxxxx>
• [PATCH 1/2] iio: dac: ad5592r: Add ACPI support
  • From: <michael.hennerich@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/2 v2] iio: light: add driver for Capella CM3605
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v2] iio: light: add DT bindings for Capella CM3605
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: cros_ec_activity: add ChromeOS EC Activity Sensors
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH] iio: light: hid-sensor-als: Add duplicate IIO_LIGHT channel
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 3/3 v2] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v2] iio: adc: break out common code from SPMI VADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3 v2] iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Running rather behind...
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V6 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: add support to lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 0/2] iio: adc: hx711: Add IIO driver for AVIA HX711 ADC
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: "jacopo@xxxxxxxxxx" <jacopo@xxxxxxxxxx>
• [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 1/8] MFD: add bindings for STM32 Timers driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: "jacopo@xxxxxxxxxx" <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: adc: hx711: Add IIO driver for AVIA HX711 ADC
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/8] MFD: add bindings for STM32 Timers driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] Documentation: dt: iio: add st_lsm6dsx sensor device binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: hx711: Add DT binding for avia,hx711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/2] iio: adc: hx711: Add IIO driver for AVIA HX711 ADC
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 1/3] ARM: sunxi_defconfig: Add CONFIG_THERMAL_OF
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] mfd: Kconfig: MFD_SUN4I_GPADC depends on !TOUCHSCREN_SUN4I_GPADC
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v9 1/3] ARM: sunxi_defconfig: Add CONFIG_THERMAL_OF
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v9 0/3] add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v9 2/3] mfd: Kconfig: MFD_SUN4I_GPADC depends on !TOUCHSCREN_SUN4I_GPADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCHv2] iio: adc: Add Maxim MAX11100 driver
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v6 1/8] MFD: add bindings for STM32 Timers driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v6 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_pressure: Export sampling frequency for lps25h and lps331ap
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_pressure: Fix data sign
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: Add Maxim MAX11100 driver
  • From: "jacopo@xxxxxxxxxx" <jacopo@xxxxxxxxxx>
• Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v6 5/8] IIO: add bindings for STM32 timer trigger driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/8] MFD: add bindings for STM32 Timers driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: allocate DMA-safe buffer
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 3/6] Documentation: DT: Add bmi160 imu binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] iio: st_pressure: Export sampling frequency for lps25h and lps331ap
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] iio: st_pressure: Fix data sign
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add DT bindings for Capella CM3605
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6 0/8] Add PWM and IIO timer drivers for STM32
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 2/8] MFD: add STM32 Timers driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 1/8] MFD: add bindings for STM32 Timers driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] iio: GPIO power switch support
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 2/2] iio: misc: add support for GPIO power switches
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/2] devicetree: power: add bindings for GPIO-driven power switches
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: allocate DMA-safe buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Presenting duplicate channels for hid sensor light
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Presenting duplicate channels for hid sensor light
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• [PATCH v3 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v3 2/2] staging: iio: ad7606: move out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v3 0/2] staging: iio: ad7606: move driver out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: allocate DMA-safe buffer
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: misc: add a generic regulator driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add Maxim MAX11100 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add Maxim MAX11100 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: impedance-analyzer: ad5933: fix wrong comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v12 0/5] mxs-lradc: Split driver into MFD
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: allocate DMA-safe buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V6 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V6 1/2] iio: adc: spmi-vadc: Update function for generic voltage conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: add support to lsm6dsx driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] Documentation: dt: iio: add st_lsm6dsx sensor device binding
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v3 1/2] iio: imu: add support to lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v3 0/2] add support to STM LSM6DS3-LSM6DSM 6-axis Mems sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 2/2] iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCH 1/2] devicetree: add Garmin vendor prefix
  • From: Matt Ranostay <matt@ranostay.consulting>
• Re: [PATCH v2 2/2] staging: iio: ad7606: move out of staging
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] staging: iio: ad7606: move out of staging
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v12 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v12 2/5] iio: adc: mxs-lradc: Add support for adc driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v12 4/5] iio: adc: mxs-lradc: Remove driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v12 5/5] mfd: Move binding document
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v12 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v12 0/5] mxs-lradc: Split driver into MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: add support to lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH V6 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V6 1/2] iio: adc: spmi-vadc: Update function for generic voltage conversion
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• [PATCH V6 0/2] Changes to support different VADC scaling
  • From: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH V5 2/2] iio: adc: spmi-vadc: Changes to support different scaling
  • From: "Phani A, Rama Krishna" <rphani@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: add support to lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v6 0/8] Add PWM and IIO timer drivers for STM32
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 1/8] MFD: add bindings for STM32 Timers driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 2/8] MFD: add STM32 Timers driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 5/8] IIO: add bindings for STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 6/8] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 8/8] ARM: dts: stm32: Enable pw1 and pwm3 for stm32f469-disco
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v6 4/8] PWM: add PWM driver for STM32 plaftorm
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v2 2/2] staging: iio: ad7606: move out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v2 1/2] staging: iio: ad7606: replace range/range_available with corresponding scale
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v2 0/2] staging: iio: ad7606: move driver out of staging
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v5 1/7] MFD: add bindings for STM32 General Purpose Timer driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH] iio: adc: max1027: allocate DMA-safe buffer
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v8 3/3] iio: adc: add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v8 1/3] ARM: sunxi_defconfig: Add CONFIG_THERMAL_OF
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v8 0/3] add support for Allwinner SoCs ADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v8 2/3] mfd: Kconfig: MFD_SUN4I_GPADC depends on !TOUCHSCREN_SUN4I_GPADC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 6/7] IIO: add STM32 timer trigger driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 1/7] MFD: add bindings for STM32 General Purpose Timer driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v11 0/5] mxs-lradc: Split driver into MFD
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v11 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v11 0/5] mxs-lradc: Split driver into MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v11 4/5] iio: adc: mxs-lradc: Remove driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v11 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v11 2/5] iio: adc: mxs-lradc: Add support for adc driver
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v11 5/5] mfd: Move binding document
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v11 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD
  • From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
• [PATCH v2 6/6] iio: bmi160: Support hardware fifo
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/6] iio: bmi160: cleanups and hardware fifo support
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/6] Documentation: DT: Add bmi160 imu binding
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/6] iio: bmi160: Protect data transmission with mutex
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/6] iio: bmi160: Add of device table for i2c
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 5/6] iio: bmi160: Fix time needed to sleep after command execution
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/6] iio: bmi160: Add of device table for spi
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v5 6/7] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v5 3/7] PWM: add pwm-stm32 DT bindings
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v5 5/7] IIO: add bindings for STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v5 4/7] PWM: add PWM driver for STM32 plaftorm
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v5 7/7] ARM: dts: stm32: add STM32 General Purpose Timer driver in DT
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v5 1/7] MFD: add bindings for STM32 General Purpose Timer driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v5 0/7] Add PWM and IIO timer drivers for STM32
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v5 2/7] MFD: add STM32 General Purpose Timer driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH] iio: max5481: Add support for Maxim digital potentiometers
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH] iio: max5481: Add support for Maxim digital potentiometers
  • From: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Staging: iio: impedance-analyzer: ad5933: fix wrong comments
  • From: Nizam Haider <nizamhaider786@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: add driver for Capella CM3605
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 2/2] iio: light: add driver for Capella CM3605
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] iio: light: add DT bindings for Capella CM3605
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 10/39] Annotate hardware config module parameters in drivers/iio/
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH] iio: Add Maxim MAX11100 driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/7] IIO: add STM32 timer trigger driver
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH] iio: Add Maxim MAX11100 driver
  • From: "jacopo@xxxxxxxxxx" <jacopo@xxxxxxxxxx>
• Re: [PATCH v4 6/7] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v4 6/7] IIO: add STM32 timer trigger driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] iio: Add Maxim MAX11100 driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: cros_ec_activity: add ChromeOS EC Activity Sensors
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/7] MFD: add STM32 General Purpose Timer driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH 2/2] iio: Add gravity sensor support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [RFC PATCH 1/2] iio: Add channel for Gravity
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH] iio: Add Maxim MAX11100 driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] iio: Add Maxim MAX11100 driver
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v4 6/7] IIO: add STM32 timer trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v4 1/7] MFD: add bindings for STM32 General Purpose Timer driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 3/3] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3] iio: adc: break out common code from SPMI VADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 6/7] IIO: add STM32 timer trigger driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 2/7] MFD: add STM32 General Purpose Timer driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 1/7] MFD: add bindings for STM32 General Purpose Timer driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 7/7] ARM: dts: stm32: add STM32 General Purpose Timer driver in DT
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 7/7] ARM: dts: stm32: add stm32 general purpose timer driver in DT
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v4 0/7] Add PWM and IIO timer drivers for STM32
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>