On 05/01/17 08:32, Linus Walleij wrote:
> The earlier deployed LIS3LV02DL driver had already defined a few
> DT bindings that need to be supported by the new more generic
> driver and listed as compatible but deprecated bindings in the
> documentation.
>
> After this we can start to activate the new driver with the old
> systems where applicable.
>
> As part of this enablement: make us depend on the old drivers
> not being in use so we don't get a kernel with two competing
> drivers.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Applied to the togreg branch of iio.git. Will push out as testing sometime soonish.
> ---
> Documentation/devicetree/bindings/iio/accel/lis302.txt | 2 +-
> Documentation/devicetree/bindings/iio/st-sensors.txt | 2 ++
> drivers/iio/accel/Kconfig | 2 ++
> drivers/iio/accel/st_accel_i2c.c | 5 +++++
> drivers/iio/accel/st_accel_spi.c | 9 +++++++++
> 5 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt
> index 2a19bff9693f..dfdce67826ba 100644
> --- a/Documentation/devicetree/bindings/iio/accel/lis302.txt
> +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt
> @@ -5,7 +5,7 @@ that apply in on the generic device (independent from the bus).
>
>
> Required properties for the SPI bindings:
> - - compatible: should be set to "st,lis3lv02d_spi"
> + - compatible: should be set to "st,lis3lv02d-spi"
> - reg: the chipselect index
> - spi-max-frequency: maximal bus speed, should be set to 1000000 unless
> constrained by external circuitry
> diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
> index c040c9ad1889..eaa8fbba34e2 100644
> --- a/Documentation/devicetree/bindings/iio/st-sensors.txt
> +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
> @@ -27,6 +27,8 @@ standard bindings from pinctrl/pinctrl-bindings.txt.
> Valid compatible strings:
>
> Accelerometers:
> +- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel)
> +- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel)
> - st,lis3lv02dl-accel
> - st,lsm303dlh-accel
> - st,lsm303dlhc-accel
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index c68bdb649005..ea295fe0f561 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -140,11 +140,13 @@ config IIO_ST_ACCEL_3AXIS
>
> config IIO_ST_ACCEL_I2C_3AXIS
> tristate
> + depends on !SENSORS_LIS3_I2C
> depends on IIO_ST_ACCEL_3AXIS
> depends on IIO_ST_SENSORS_I2C
>
> config IIO_ST_ACCEL_SPI_3AXIS
> tristate
> + depends on !SENSORS_LIS3_SPI
> depends on IIO_ST_ACCEL_3AXIS
> depends on IIO_ST_SENSORS_SPI
>
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> index c0f8867aa1ea..99a7cdbe3d5d 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -21,6 +21,11 @@
> #ifdef CONFIG_OF
> static const struct of_device_id st_accel_of_match[] = {
> {
> + /* An older compatible */
> + .compatible = "st,lis3lv02d",
> + .data = LIS3LV02DL_ACCEL_DEV_NAME,
> + },
> + {
> .compatible = "st,lis3lv02dl-accel",
> .data = LIS3LV02DL_ACCEL_DEV_NAME,
> },
> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> index c25ac50d4600..29a15f27a51b 100644
> --- a/drivers/iio/accel/st_accel_spi.c
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -65,9 +65,18 @@ static const struct spi_device_id st_accel_id_table[] = {
> };
> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id lis302dl_spi_dt_ids[] = {
> + { .compatible = "st,lis302dl-spi" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, lis302dl_spi_dt_ids);
> +#endif
> +
> static struct spi_driver st_accel_driver = {
> .driver = {
> .name = "st-accel-spi",
> + .of_match_table = of_match_ptr(lis302dl_spi_dt_ids),
> },
> .probe = st_accel_spi_probe,
> .remove = st_accel_spi_remove,
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
