Add support to STM LSM6DS3-LSM6DSM 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/lsm6ds3.pdf http://www.st.com/resource/en/datasheet/lsm6dsm.pdf - continuous mode support - i2c support - spi support - sw fifo mode support - supported devices: lsm6ds3, lsm6dsm Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> --- drivers/iio/imu/Kconfig | 1 + drivers/iio/imu/Makefile | 2 + drivers/iio/imu/st_lsm6dsx/Kconfig | 23 + drivers/iio/imu/st_lsm6dsx/Makefile | 5 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 133 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 437 +++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 655 +++++++++++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 88 ++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 126 +++++ 9 files changed, 1470 insertions(+) create mode 100644 drivers/iio/imu/st_lsm6dsx/Kconfig create mode 100644 drivers/iio/imu/st_lsm6dsx/Makefile create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 1f1ad41..156630a 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -39,6 +39,7 @@ config KMX61 be called kmx61. source "drivers/iio/imu/inv_mpu6050/Kconfig" +source "drivers/iio/imu/st_lsm6dsx/Kconfig" endmenu diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index c71bcd3..8b563c3 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -17,3 +17,5 @@ obj-y += bmi160/ obj-y += inv_mpu6050/ obj-$(CONFIG_KMX61) += kmx61.o + +obj-y += st_lsm6dsx/ diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig new file mode 100644 index 0000000..2ebcb74 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -0,0 +1,23 @@ + +config IIO_ST_LSM6DSX + tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" + depends on (I2C || SPI) + select IIO_BUFFER + select IIO_KFIFO_BUF + select IIO_ST_LSM6DSX_I2C if (I2C) + select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) + help + Say yes here to build support for STMicroelectronics LSM6DSx imu + sensor. Supported devices: lsm6ds3, lsm6dsm + + To compile this driver as a module, choose M here: the module + will be called st_lsm6dsx. + +config IIO_ST_LSM6DSX_I2C + tristate + depends on IIO_ST_LSM6DSX + +config IIO_ST_LSM6DSX_SPI + tristate + depends on IIO_ST_LSM6DSX + diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile new file mode 100644 index 0000000..35919fe --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/Makefile @@ -0,0 +1,5 @@ +st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o + +obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o +obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o +obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h new file mode 100644 index 0000000..5831f63 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -0,0 +1,133 @@ +/* + * STMicroelectronics st_lsm6dsx sensor driver + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> + * Denis Ciocca <denis.ciocca@xxxxxx> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_LSM6DSX_H +#define ST_LSM6DSX_H + +#include <linux/device.h> + +#define ST_LSM6DS3_DEV_NAME "lsm6ds3" +#define ST_LSM6DSM_DEV_NAME "lsm6dsm" + +#define ST_LSM6DSX_CHAN_SIZE 2 +#define ST_LSM6DSX_SAMPLE_SIZE 6 +#define ST_LSM6DSX_SAMPLE_DEPTH (ST_LSM6DSX_SAMPLE_SIZE / \ + ST_LSM6DSX_CHAN_SIZE) + +#define ST_LSM6DSX_RX_MAX_LENGTH 8 +#define ST_LSM6DSX_TX_MAX_LENGTH 8 + +struct st_lsm6dsx_transfer_buffer { + u8 rx_buf[ST_LSM6DSX_RX_MAX_LENGTH]; + u8 tx_buf[ST_LSM6DSX_TX_MAX_LENGTH] ____cacheline_aligned; +}; + +struct st_lsm6dsx_transfer_function { + int (*read)(struct device *dev, u8 addr, int len, u8 *data); + int (*write)(struct device *dev, u8 addr, int len, u8 *data); +}; + +struct st_lsm6dsx_reg { + u8 addr; + u8 mask; +}; + +struct st_lsm6dsx_settings { + u8 wai; + u16 max_fifo_size; +}; + +enum st_lsm6dsx_sensor_id { + ST_LSM6DSX_ID_ACC, + ST_LSM6DSX_ID_GYRO, + ST_LSM6DSX_ID_MAX, +}; + +enum st_lsm6dsx_fifo_mode { + ST_LSM6DSX_FIFO_BYPASS = 0x0, + ST_LSM6DSX_FIFO_CONT = 0x6, +}; + +/** + * struct st_lsm6dsx_sensor - ST IMU sensor instance + * @id: Sensor identifier. + * @hw: Pointer to instance of struct st_lsm6dsx_hw. + * @gain: Configured sensor sensitivity. + * @odr: Output data rate of the sensor [Hz]. + * @watermark: Sensor watermark level. + * @sip: Number of samples in a given pattern. + * @decimator: FIFO decimation factor. + * @decimator_mask: Sensor mask for decimation register. + * @delta_ts: Delta time between two consecutive interrupts. + * @ts: Latest timestamp from the interrupt handler. + */ +struct st_lsm6dsx_sensor { + enum st_lsm6dsx_sensor_id id; + struct st_lsm6dsx_hw *hw; + + u32 gain; + u16 odr; + + u16 watermark; + u8 sip; + u8 decimator; + u8 decimator_mask; + + s64 delta_ts; + s64 ts; +}; + +/** + * struct st_lsm6dsx_hw - ST IMU MEMS hw instance + * @name: Pointer to the device name (I2C name or SPI modalias). + * @dev: Pointer to instance of struct device (I2C or SPI). + * @irq: Device interrupt line (I2C or SPI). + * @lock: Mutex to protect read and write operations. + * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. + * @fifo_mode: FIFO operating mode supported by the device. + * @enable_mask: Enabled sensor bitmask. + * @sip: Total number of samples (acc/gyro) in a given pattern. + * @iio_devs: Pointers to acc/gyro iio_dev instances. + * @settings: Pointer to the specific sensor settings in use. + * @tf: Transfer function structure used by I/O operations. + * @tb: Transfer buffers used by SPI I/O operations. + */ +struct st_lsm6dsx_hw { + const char *name; + struct device *dev; + int irq; + + struct mutex lock; + struct mutex fifo_lock; + + enum st_lsm6dsx_fifo_mode fifo_mode; + u8 enable_mask; + u8 sip; + + struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX]; + + const struct st_lsm6dsx_settings *settings; + + const struct st_lsm6dsx_transfer_function *tf; + struct st_lsm6dsx_transfer_buffer tb; +}; + +int st_lsm6dsx_probe(struct st_lsm6dsx_hw *hw); +int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor); +int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor); +int st_lsm6dsx_allocate_buffers(struct st_lsm6dsx_hw *hw); +int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask, + u8 val); +int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, + u16 watermark); + +#endif /* ST_LSM6DSX_H */ + diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c new file mode 100644 index 0000000..7f4032d --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -0,0 +1,437 @@ +/* + * STMicroelectronics st_lsm6dsx FIFO buffer library driver + * + * LSM6DS3/LSM6DSM: The FIFO buffer can be configured to store data + * from gyroscope and accelerometer. Samples are queued without any tag + * according to a specific pattern based on 'FIFO data sets' (6 bytes each): + * - 1st data set is reserved for gyroscope data + * - 2nd data set is reserved for accelerometer data + * The FIFO pattern changes depending on the ODRs and decimation factors + * assigned to the FIFO data sets. The first sequence of data stored in FIFO + * buffer contains the data of all the enabled FIFO data sets + * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the + * value of the decimation factor and ODR set for each FIFO data set. + * FIFO supported modes: + * - BYPASS: FIFO disabled + * - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index + * restarts from the beginning and the oldest sample is overwritten + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> + * Denis Ciocca <denis.ciocca@xxxxxx> + * + * Licensed under the GPL-2. + */ +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/iio/kfifo_buf.h> + +#include "st_lsm6dsx.h" + +#define ST_LSM6DSX_REG_FIFO_THL_ADDR 0x06 +#define ST_LSM6DSX_REG_FIFO_THH_ADDR 0x07 +#define ST_LSM6DSX_FIFO_TH_MASK GENMASK(11, 0) +#define ST_LSM6DSX_REG_FIFO_DEC_GXL_ADDR 0x08 +#define ST_LSM6DSX_REG_FIFO_MODE_ADDR 0x0a +#define ST_LSM6DSX_FIFO_MODE_MASK GENMASK(2, 0) +#define ST_LSM6DSX_FIFO_ODR_MASK GENMASK(6, 3) +#define ST_LSM6DSX_REG_FIFO_DIFFL_ADDR 0x3a +#define ST_LSM6DSX_FIFO_DIFF_MASK GENMASK(11, 0) +#define ST_LSM6DSX_FIFO_EMPTY_MASK BIT(12) +#define ST_LSM6DSX_REG_FIFO_OUTL_ADDR 0x3e + +#define ST_LSM6DSX_MAX_FIFO_ODR_VAL 0x08 + +struct st_lsm6dsx_decimator_entry { + u8 decimator; + u8 val; +}; + +static const +struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = { + { 0, 0x0 }, + { 1, 0x1 }, + { 2, 0x2 }, + { 3, 0x3 }, + { 4, 0x4 }, + { 8, 0x5 }, + { 16, 0x6 }, + { 32, 0x7 }, +}; + +static int st_lsm6dsx_get_decimator_val(u8 val) +{ + const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table); + int i; + + for (i = 0; i < max_size; i++) + if (st_lsm6dsx_decimator_table[i].decimator == val) + break; + + return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val; +} + +static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw, + u16 *max_odr, u16 *min_odr) +{ + struct st_lsm6dsx_sensor *sensor; + int i; + + *max_odr = 0, *min_odr = ~0; + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + sensor = iio_priv(hw->iio_devs[i]); + + if (!(hw->enable_mask & BIT(sensor->id))) + continue; + + *max_odr = max_t(u16, *max_odr, sensor->odr); + *min_odr = min_t(u16, *min_odr, sensor->odr); + } +} + +static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) +{ + struct st_lsm6dsx_sensor *sensor; + u16 max_odr, min_odr, sip = 0; + int err, i; + u8 data; + + st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr); + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + sensor = iio_priv(hw->iio_devs[i]); + + /* update fifo decimators and sample in pattern */ + if (hw->enable_mask & BIT(sensor->id)) { + sensor->sip = sensor->odr / min_odr; + sensor->decimator = max_odr / sensor->odr; + data = st_lsm6dsx_get_decimator_val(sensor->decimator); + } else { + sensor->sip = 0; + sensor->decimator = 0; + data = 0; + } + + err = st_lsm6dsx_write_with_mask(hw, + ST_LSM6DSX_REG_FIFO_DEC_GXL_ADDR, + sensor->decimator_mask, data); + if (err < 0) + return err; + + sip += sensor->sip; + } + hw->sip = sip; + + return 0; +} + +static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, + enum st_lsm6dsx_fifo_mode fifo_mode) +{ + u8 data; + int err; + + switch (fifo_mode) { + case ST_LSM6DSX_FIFO_BYPASS: + data = fifo_mode; + break; + case ST_LSM6DSX_FIFO_CONT: + data = (ST_LSM6DSX_MAX_FIFO_ODR_VAL << + __ffs(ST_LSM6DSX_FIFO_ODR_MASK)) | fifo_mode; + break; + default: + return -EINVAL; + } + + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_MODE_ADDR, + sizeof(data), &data); + if (err < 0) + return err; + + hw->fifo_mode = fifo_mode; + + return 0; +} + +int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark) +{ + u16 fifo_watermark = ~0, cur_watermark, sip = 0; + struct st_lsm6dsx_hw *hw = sensor->hw; + struct st_lsm6dsx_sensor *cur_sensor; + __le16 wdata; + int i, err; + u8 data; + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + cur_sensor = iio_priv(hw->iio_devs[i]); + + if (!(hw->enable_mask & BIT(cur_sensor->id))) + continue; + + cur_watermark = (cur_sensor == sensor) ? watermark + : cur_sensor->watermark; + + fifo_watermark = min_t(u16, fifo_watermark, cur_watermark); + sip += cur_sensor->sip; + } + + if (!sip) + return 0; + + fifo_watermark = max_t(u16, fifo_watermark, sip); + fifo_watermark = (fifo_watermark / sip) * sip; + fifo_watermark = fifo_watermark * ST_LSM6DSX_SAMPLE_DEPTH; + + mutex_lock(&hw->lock); + + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_FIFO_THH_ADDR, + sizeof(data), &data); + if (err < 0) + goto out; + + fifo_watermark = ((data & ~ST_LSM6DSX_FIFO_TH_MASK) << 8) | + (fifo_watermark & ST_LSM6DSX_FIFO_TH_MASK); + + wdata = cpu_to_le16(fifo_watermark); + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_THL_ADDR, + sizeof(wdata), (u8 *)&wdata); +out: + mutex_unlock(&hw->lock); + + return err < 0 ? err : 0; +} + +/** + * st_lsm6dsx_read_fifo() - LSM6DS3-LSM6DSM read FIFO routine + * @hw: Pointer to instance of struct st_lsm6dsx_hw. + * + * Read samples from the hw FIFO and push them to IIO buffers. + * + * Return: Number of bytes read from the FIFO + */ +static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) +{ + u8 buff[ALIGN(ST_LSM6DSX_SAMPLE_SIZE, sizeof(s64)) + sizeof(s64)]; + u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE; + struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor; + s64 acc_ts, acc_delta_ts, gyro_ts, gyro_delta_ts; + int err, acc_sip, gyro_sip, read_len, samples; + __le16 fifo_status; + + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_FIFO_DIFFL_ADDR, + sizeof(fifo_status), (u8 *)&fifo_status); + if (err < 0) + return err; + + if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK)) + return 0; + + fifo_len = (le16_to_cpu(fifo_status) & ST_LSM6DSX_FIFO_DIFF_MASK) * + ST_LSM6DSX_CHAN_SIZE; + samples = fifo_len / ST_LSM6DSX_SAMPLE_SIZE; + fifo_len = (fifo_len / pattern_len) * pattern_len; + + /* + * compute delta timestamp between two consecutive samples + * in order to estimate queueing time of data generated + * by the sensor + */ + acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + acc_ts = acc_sensor->ts - acc_sensor->delta_ts; + acc_delta_ts = div_s64(acc_sensor->delta_ts * acc_sensor->decimator, + samples); + + gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]); + gyro_ts = gyro_sensor->ts - gyro_sensor->delta_ts; + gyro_delta_ts = div_s64(gyro_sensor->delta_ts * gyro_sensor->decimator, + samples); + + for (read_len = 0; read_len < fifo_len; read_len += pattern_len) { + gyro_sip = gyro_sensor->sip; + acc_sip = acc_sensor->sip; + + while (acc_sip > 0 || gyro_sip > 0) { + if (gyro_sip-- > 0) { + err = hw->tf->read(hw->dev, + ST_LSM6DSX_REG_FIFO_OUTL_ADDR, + ST_LSM6DSX_SAMPLE_SIZE, buff); + if (err < 0) + return err; + + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_GYRO], + buff, gyro_ts); + gyro_ts += gyro_delta_ts; + } + + if (acc_sip-- > 0) { + err = hw->tf->read(hw->dev, + ST_LSM6DSX_REG_FIFO_OUTL_ADDR, + ST_LSM6DSX_SAMPLE_SIZE, buff); + if (err < 0) + return err; + + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_ACC], + buff, acc_ts); + acc_ts += acc_delta_ts; + } + } + } + + return read_len; +} + +static int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw) +{ + int err; + + mutex_lock(&hw->fifo_lock); + + st_lsm6dsx_read_fifo(hw); + err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS); + + mutex_unlock(&hw->fifo_lock); + + return err; +} + +static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + struct st_lsm6dsx_hw *hw = sensor->hw; + int err; + + if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) { + err = st_lsm6dsx_flush_fifo(hw); + if (err < 0) + return err; + } + + if (enable) { + err = st_lsm6dsx_sensor_enable(sensor); + if (err < 0) + return err; + } else { + err = st_lsm6dsx_sensor_disable(sensor); + if (err < 0) + return err; + } + + err = st_lsm6dsx_update_decimators(hw); + if (err < 0) + return err; + + err = st_lsm6dsx_update_watermark(sensor, sensor->watermark); + if (err < 0) + return err; + + if (hw->enable_mask) { + err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT); + if (err < 0) + return err; + + /* + * store enable buffer timestamp as reference to compute + * first delta timestamp + */ + sensor->ts = iio_get_time_ns(iio_dev); + } + + return 0; +} + +static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private) +{ + struct st_lsm6dsx_hw *hw = (struct st_lsm6dsx_hw *)private; + struct st_lsm6dsx_sensor *sensor; + int i; + + if (!hw->sip) + return IRQ_NONE; + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + sensor = iio_priv(hw->iio_devs[i]); + + if (sensor->sip > 0) { + s64 timestamp; + + timestamp = iio_get_time_ns(hw->iio_devs[i]); + sensor->delta_ts = timestamp - sensor->ts; + sensor->ts = timestamp; + } + } + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private) +{ + struct st_lsm6dsx_hw *hw = (struct st_lsm6dsx_hw *)private; + int count; + + mutex_lock(&hw->fifo_lock); + count = st_lsm6dsx_read_fifo(hw); + mutex_unlock(&hw->fifo_lock); + + return !count ? IRQ_NONE : IRQ_HANDLED; +} + +static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev) +{ + return st_lsm6dsx_update_fifo(iio_dev, true); +} + +static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev) +{ + return st_lsm6dsx_update_fifo(iio_dev, false); +} + +static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = { + .preenable = st_lsm6dsx_buffer_preenable, + .postdisable = st_lsm6dsx_buffer_postdisable, +}; + +int st_lsm6dsx_allocate_buffers(struct st_lsm6dsx_hw *hw) +{ + struct iio_buffer *buffer; + unsigned long irq_type; + int i, err; + + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); + + switch (irq_type) { + case IRQF_TRIGGER_HIGH: + case IRQF_TRIGGER_RISING: + break; + default: + dev_info(hw->dev, "mode %lx unsupported\n", irq_type); + return -EINVAL; + } + + err = devm_request_threaded_irq(hw->dev, hw->irq, + st_lsm6dsx_handler_irq, + st_lsm6dsx_handler_thread, + irq_type | IRQF_ONESHOT, + hw->name, hw); + if (err) { + dev_err(hw->dev, "failed to request trigger irq %d\n", + hw->irq); + return err; + } + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + buffer = devm_iio_kfifo_allocate(hw->dev); + if (!buffer) + return -ENOMEM; + + iio_device_attach_buffer(hw->iio_devs[i], buffer); + hw->iio_devs[i]->modes |= INDIO_BUFFER_SOFTWARE; + hw->iio_devs[i]->setup_ops = &st_lsm6dsx_buffer_ops; + } + + return 0; +} + diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c new file mode 100644 index 0000000..473315a --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -0,0 +1,655 @@ +/* + * STMicroelectronics st_lsm6dsx sensor driver + * + * The ST LSM6DSx IMU MEMS series consists of 3D digital accelerometer + * and 3D digital gyroscope system-in-package with a digital I2C/SPI serial + * interface standard output. + * LSM6DSx IMU MEMS series has a dynamic user-selectable full-scale + * acceleration range of +-2/+-4/+-8/+-16 g and an angular rate range of + * +-125/+-245/+-500/+-1000/+-2000 dps + * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer + * allowing dynamic batching of sensor data. + * + * Supported sensors: + * - LSM6DS3: + * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 + * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 + * - FIFO size: 8KB + * + * - LSM6DSM: + * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 + * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 + * - FIFO size: 4KB + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> + * Denis Ciocca <denis.ciocca@xxxxxx> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#include "st_lsm6dsx.h" + +#define ST_LSM6DSX_REG_ACC_DEC_MASK GENMASK(2, 0) +#define ST_LSM6DSX_REG_GYRO_DEC_MASK GENMASK(5, 3) +#define ST_LSM6DSX_REG_INT1_ADDR 0x0d +#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK BIT(3) +#define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f +#define ST_LSM6DSX_REG_RESET_ADDR 0x12 +#define ST_LSM6DSX_REG_RESET_MASK BIT(0) +#define ST_LSM6DSX_REG_BDU_ADDR 0x12 +#define ST_LSM6DSX_REG_BDU_MASK BIT(6) +#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13 +#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5) +#define ST_LSM6DSX_REG_ROUNDING_ADDR 0x16 +#define ST_LSM6DSX_REG_ROUNDING_MASK BIT(2) +#define ST_LSM6DSX_REG_LIR_ADDR 0x58 +#define ST_LSM6DSX_REG_LIR_MASK BIT(0) + +#define ST_LSM6DSX_REG_ACC_ODR_ADDR 0x10 +#define ST_LSM6DSX_REG_ACC_ODR_MASK GENMASK(7, 4) +#define ST_LSM6DSX_REG_ACC_FS_ADDR 0x10 +#define ST_LSM6DSX_REG_ACC_FS_MASK GENMASK(3, 2) +#define ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR 0x28 +#define ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR 0x2a +#define ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR 0x2c + +#define ST_LSM6DSX_REG_GYRO_ODR_ADDR 0x11 +#define ST_LSM6DSX_REG_GYRO_ODR_MASK GENMASK(7, 4) +#define ST_LSM6DSX_REG_GYRO_FS_ADDR 0x11 +#define ST_LSM6DSX_REG_GYRO_FS_MASK GENMASK(3, 2) +#define ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR 0x22 +#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24 +#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26 + +#define ST_LSM6DS3_WHOAMI 0x69 +#define ST_LSM6DSM_WHOAMI 0x6a + +#define ST_LSM6DS3_MAX_FIFO_SIZE 8192 +#define ST_LSM6DSM_MAX_FIFO_SIZE 4096 + +#define ST_LSM6DSX_ACC_FS_2G_GAIN IIO_G_TO_M_S_2(61) +#define ST_LSM6DSX_ACC_FS_4G_GAIN IIO_G_TO_M_S_2(122) +#define ST_LSM6DSX_ACC_FS_8G_GAIN IIO_G_TO_M_S_2(244) +#define ST_LSM6DSX_ACC_FS_16G_GAIN IIO_G_TO_M_S_2(488) + +#define ST_LSM6DSX_GYRO_FS_245_GAIN IIO_DEGREE_TO_RAD(4375) +#define ST_LSM6DSX_GYRO_FS_500_GAIN IIO_DEGREE_TO_RAD(8750) +#define ST_LSM6DSX_GYRO_FS_1000_GAIN IIO_DEGREE_TO_RAD(17500) +#define ST_LSM6DSX_GYRO_FS_2000_GAIN IIO_DEGREE_TO_RAD(70000) + +struct st_lsm6dsx_odr { + u16 hz; + u8 val; +}; + +#define ST_LSM6DSX_ODR_LIST_SIZE 6 +struct st_lsm6dsx_odr_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; +}; + +static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = ST_LSM6DSX_REG_ACC_ODR_ADDR, + .mask = ST_LSM6DSX_REG_ACC_ODR_MASK, + }, + .odr_avl[0] = { 13, 0x01 }, + .odr_avl[1] = { 26, 0x02 }, + .odr_avl[2] = { 52, 0x03 }, + .odr_avl[3] = { 104, 0x04 }, + .odr_avl[4] = { 208, 0x05 }, + .odr_avl[5] = { 416, 0x06 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = ST_LSM6DSX_REG_GYRO_ODR_ADDR, + .mask = ST_LSM6DSX_REG_GYRO_ODR_MASK, + }, + .odr_avl[0] = { 13, 0x01 }, + .odr_avl[1] = { 26, 0x02 }, + .odr_avl[2] = { 52, 0x03 }, + .odr_avl[3] = { 104, 0x04 }, + .odr_avl[4] = { 208, 0x05 }, + .odr_avl[5] = { 416, 0x06 }, + } +}; + +struct st_lsm6dsx_fs { + u32 gain; + u8 val; +}; + +#define ST_LSM6DSX_FS_LIST_SIZE 4 +struct st_lsm6dsx_fs_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; +}; + +static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = ST_LSM6DSX_REG_ACC_FS_ADDR, + .mask = ST_LSM6DSX_REG_ACC_FS_MASK, + }, + .fs_avl[0] = { ST_LSM6DSX_ACC_FS_2G_GAIN, 0x0 }, + .fs_avl[1] = { ST_LSM6DSX_ACC_FS_4G_GAIN, 0x2 }, + .fs_avl[2] = { ST_LSM6DSX_ACC_FS_8G_GAIN, 0x3 }, + .fs_avl[3] = { ST_LSM6DSX_ACC_FS_16G_GAIN, 0x1 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = ST_LSM6DSX_REG_GYRO_FS_ADDR, + .mask = ST_LSM6DSX_REG_GYRO_FS_MASK, + }, + .fs_avl[0] = { ST_LSM6DSX_GYRO_FS_245_GAIN, 0x0 }, + .fs_avl[1] = { ST_LSM6DSX_GYRO_FS_500_GAIN, 0x1 }, + .fs_avl[2] = { ST_LSM6DSX_GYRO_FS_1000_GAIN, 0x2 }, + .fs_avl[3] = { ST_LSM6DSX_GYRO_FS_2000_GAIN, 0x3 }, + } +}; + +static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { + { + .wai = ST_LSM6DS3_WHOAMI, + .max_fifo_size = ST_LSM6DS3_MAX_FIFO_SIZE, + }, + { + .wai = ST_LSM6DSM_WHOAMI, + .max_fifo_size = ST_LSM6DSM_MAX_FIFO_SIZE, + }, +}; + +#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ +{ \ + .type = chan_type, \ + .address = addr, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = scan_idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + +static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask, + u8 val) +{ + u8 data; + int err; + + mutex_lock(&hw->lock); + + err = hw->tf->read(hw->dev, addr, sizeof(data), &data); + if (err < 0) { + dev_err(hw->dev, "failed to read %02x register\n", addr); + goto out; + } + + data = (data & ~mask) | ((val << __ffs(mask)) & mask); + + err = hw->tf->write(hw->dev, addr, sizeof(data), &data); + if (err < 0) + dev_err(hw->dev, "failed to write %02x register\n", addr); + +out: + mutex_unlock(&hw->lock); + + return err; +} + +static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw) +{ + int err, i; + u8 data; + + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_WHOAMI_ADDR, sizeof(data), + &data); + if (err < 0) { + dev_err(hw->dev, "failed to read whoami register\n"); + return err; + } + + for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) { + if (data == st_lsm6dsx_sensor_settings[i].wai) { + hw->settings = &st_lsm6dsx_sensor_settings[i]; + break; + } + } + + if (i == ARRAY_SIZE(st_lsm6dsx_sensor_settings)) { + dev_err(hw->dev, "unsupported whoami [%02x]\n", data); + return -ENODEV; + } + + return 0; +} + +static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor, + u32 gain) +{ + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, err; + u8 val; + + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) + if (st_lsm6dsx_fs_table[id].fs_avl[i].gain == gain) + break; + + if (i == ST_LSM6DSX_FS_LIST_SIZE) + return -EINVAL; + + val = st_lsm6dsx_fs_table[id].fs_avl[i].val; + err = st_lsm6dsx_write_with_mask(sensor->hw, + st_lsm6dsx_fs_table[id].reg.addr, + st_lsm6dsx_fs_table[id].reg.mask, + val); + if (err < 0) + return err; + + sensor->gain = gain; + + return 0; +} + +static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) +{ + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, err; + u8 val; + + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) + if (st_lsm6dsx_odr_table[id].odr_avl[i].hz == odr) + break; + + if (i == ST_LSM6DSX_ODR_LIST_SIZE) + return -EINVAL; + + val = st_lsm6dsx_odr_table[id].odr_avl[i].val; + err = st_lsm6dsx_write_with_mask(sensor->hw, + st_lsm6dsx_odr_table[id].reg.addr, + st_lsm6dsx_odr_table[id].reg.mask, + val); + if (err < 0) + return err; + + sensor->odr = odr; + + return 0; +} + +int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor) +{ + int err; + + err = st_lsm6dsx_set_odr(sensor, sensor->odr); + if (err < 0) + return err; + + sensor->hw->enable_mask |= BIT(sensor->id); + + return 0; +} + +int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor) +{ + enum st_lsm6dsx_sensor_id id = sensor->id; + int err; + + err = st_lsm6dsx_write_with_mask(sensor->hw, + st_lsm6dsx_odr_table[id].reg.addr, + st_lsm6dsx_odr_table[id].reg.mask, 0); + if (err < 0) + return err; + + sensor->hw->enable_mask &= ~BIT(id); + + return 0; +} + +static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, + u8 addr, int *val) +{ + int err, delay; + __le16 data; + + err = st_lsm6dsx_sensor_enable(sensor); + if (err < 0) + return err; + + delay = 1000000 / sensor->odr; + usleep_range(delay, 2 * delay); + + err = sensor->hw->tf->read(sensor->hw->dev, addr, sizeof(data), + (u8 *)&data); + if (err < 0) + return err; + + st_lsm6dsx_sensor_disable(sensor); + + *val = (s16)data; + + return IIO_VAL_INT; +} + +static int st_lsm6dsx_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *ch, + int *val, int *val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int ret; + + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = st_lsm6dsx_read_oneshot(sensor, ch->address, val); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = sensor->odr; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = sensor->gain; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return ret; +} + +static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int err; + + err = iio_device_claim_direct_mode(iio_dev); + if (err) + return err; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + err = st_lsm6dsx_set_full_scale(sensor, val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + err = st_lsm6dsx_set_odr(sensor, val); + break; + default: + err = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return err; +} + +static int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + struct st_lsm6dsx_hw *hw = sensor->hw; + int err, max_fifo_len; + + max_fifo_len = hw->settings->max_fifo_size / ST_LSM6DSX_SAMPLE_SIZE; + if (val < 1 || val > max_fifo_len) + return -EINVAL; + + err = st_lsm6dsx_update_watermark(sensor, val); + if (err < 0) + return err; + + sensor->watermark = val; + + return 0; +} + +static ssize_t +st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, len = 0; + + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", + st_lsm6dsx_odr_table[id].odr_avl[i].hz); + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, len = 0; + + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + st_lsm6dsx_fs_table[id].fs_avl[i].gain); + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_sysfs_sampling_frequency_avail); +static IIO_DEVICE_ATTR(in_accel_scale_available, 0444, + st_lsm6dsx_sysfs_scale_avail, NULL, 0); +static IIO_DEVICE_ATTR(in_anglvel_scale_available, 0444, + st_lsm6dsx_sysfs_scale_avail, NULL, 0); + +static struct attribute *st_lsm6dsx_acc_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_accel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_lsm6dsx_acc_attribute_group = { + .attrs = st_lsm6dsx_acc_attributes, +}; + +static const struct iio_info st_lsm6dsx_acc_info = { + .driver_module = THIS_MODULE, + .attrs = &st_lsm6dsx_acc_attribute_group, + .read_raw = st_lsm6dsx_read_raw, + .write_raw = st_lsm6dsx_write_raw, + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, +}; + +static struct attribute *st_lsm6dsx_gyro_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_lsm6dsx_gyro_attribute_group = { + .attrs = st_lsm6dsx_gyro_attributes, +}; + +static const struct iio_info st_lsm6dsx_gyro_info = { + .driver_module = THIS_MODULE, + .attrs = &st_lsm6dsx_gyro_attribute_group, + .read_raw = st_lsm6dsx_read_raw, + .write_raw = st_lsm6dsx_write_raw, + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, +}; + +static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; + +static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) +{ + int err; + u8 data; + + data = ST_LSM6DSX_REG_RESET_MASK; + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_RESET_ADDR, sizeof(data), + &data); + if (err < 0) + return err; + + msleep(200); + + /* latch interrupts */ + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_LIR_ADDR, + ST_LSM6DSX_REG_LIR_MASK, 1); + if (err < 0) + return err; + + /* enable Block Data Update */ + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_BDU_ADDR, + ST_LSM6DSX_REG_BDU_MASK, 1); + if (err < 0) + return err; + + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_ROUNDING_ADDR, + ST_LSM6DSX_REG_ROUNDING_MASK, 1); + if (err < 0) + return err; + + /* enable FIFO watermak interrupt */ + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT1_ADDR, + ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK, 1); + if (err < 0) + return err; + + /* redirect INT2 on INT1 */ + return st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT2_ON_INT1_ADDR, + ST_LSM6DSX_REG_INT2_ON_INT1_MASK, 1); +} + +static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, + enum st_lsm6dsx_sensor_id id) +{ + struct st_lsm6dsx_sensor *sensor; + struct iio_dev *iio_dev; + + iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); + if (!iio_dev) + return NULL; + + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->dev.parent = hw->dev; + iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; + + sensor = iio_priv(iio_dev); + sensor->id = id; + sensor->hw = hw; + sensor->odr = st_lsm6dsx_odr_table[id].odr_avl[0].hz; + sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain; + sensor->watermark = 1; + + switch (id) { + case ST_LSM6DSX_ID_ACC: + iio_dev->channels = st_lsm6dsx_acc_channels; + iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels); + iio_dev->name = "lsm6dsx_accel"; + iio_dev->info = &st_lsm6dsx_acc_info; + + sensor->decimator_mask = ST_LSM6DSX_REG_ACC_DEC_MASK; + break; + case ST_LSM6DSX_ID_GYRO: + iio_dev->channels = st_lsm6dsx_gyro_channels; + iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels); + iio_dev->name = "lsm6dsx_gyro"; + iio_dev->info = &st_lsm6dsx_gyro_info; + + sensor->decimator_mask = ST_LSM6DSX_REG_GYRO_DEC_MASK; + break; + default: + return NULL; + } + + return iio_dev; +} + +int st_lsm6dsx_probe(struct st_lsm6dsx_hw *hw) +{ + int i, err; + + mutex_init(&hw->lock); + mutex_init(&hw->fifo_lock); + + err = st_lsm6dsx_check_whoami(hw); + if (err < 0) + return err; + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i); + if (!hw->iio_devs[i]) + return -ENOMEM; + } + + err = st_lsm6dsx_init_device(hw); + if (err < 0) + return err; + + if (hw->irq > 0) { + err = st_lsm6dsx_allocate_buffers(hw); + if (err < 0) + return err; + } + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + err = devm_iio_device_register(hw->dev, hw->iio_devs[i]); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL(st_lsm6dsx_probe); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@xxxxxx>"); +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@xxxxxx>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c new file mode 100644 index 0000000..cb9a158 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -0,0 +1,88 @@ +/* + * STMicroelectronics st_lsm6dsx i2c driver + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> + * Denis Ciocca <denis.ciocca@xxxxxx> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include "st_lsm6dsx.h" + +static int st_lsm6dsx_i2c_read(struct device *dev, u8 addr, int len, u8 *data) +{ + return i2c_smbus_read_i2c_block_data_or_emulated(to_i2c_client(dev), + addr, len, data); +} + +static int st_lsm6dsx_i2c_write(struct device *dev, u8 addr, int len, u8 *data) +{ + return i2c_smbus_write_i2c_block_data(to_i2c_client(dev), addr, + len, data); +} + +static const struct st_lsm6dsx_transfer_function st_lsm6dsx_transfer_fn = { + .read = st_lsm6dsx_i2c_read, + .write = st_lsm6dsx_i2c_write, +}; + +static int st_lsm6dsx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct st_lsm6dsx_hw *hw; + + hw = devm_kzalloc(&client->dev, sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + + i2c_set_clientdata(client, hw); + hw->name = client->name; + hw->dev = &client->dev; + hw->irq = client->irq; + hw->tf = &st_lsm6dsx_transfer_fn; + + return st_lsm6dsx_probe(hw); +} + +static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { + { + .compatible = "st,lsm6ds3", + .data = ST_LSM6DS3_DEV_NAME, + }, + { + .compatible = "st,lsm6dsm", + .data = ST_LSM6DSM_DEV_NAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); + +static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { + { ST_LSM6DS3_DEV_NAME }, + { ST_LSM6DSM_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); + +static struct i2c_driver st_lsm6dsx_driver = { + .driver = { + .name = "st_lsm6dsx_i2c", + .of_match_table = of_match_ptr(st_lsm6dsx_i2c_of_match), + }, + .probe = st_lsm6dsx_i2c_probe, + .id_table = st_lsm6dsx_i2c_id_table, +}; +module_i2c_driver(st_lsm6dsx_driver); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@xxxxxx>"); +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@xxxxxx>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c new file mode 100644 index 0000000..f16eab5 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -0,0 +1,126 @@ +/* + * STMicroelectronics st_lsm6dsx spi driver + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi@xxxxxx> + * Denis Ciocca <denis.ciocca@xxxxxx> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include "st_lsm6dsx.h" + +#define SENSORS_SPI_READ BIT(7) + +static int st_lsm6dsx_spi_read(struct device *dev, u8 addr, int len, + u8 *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct st_lsm6dsx_hw *hw = spi_get_drvdata(spi); + int err; + + struct spi_transfer xfers[] = { + { + .tx_buf = hw->tb.tx_buf, + .bits_per_word = 8, + .len = 1, + }, + { + .rx_buf = hw->tb.rx_buf, + .bits_per_word = 8, + .len = len, + } + }; + + hw->tb.tx_buf[0] = addr | SENSORS_SPI_READ; + + err = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers)); + if (err < 0) + return err; + + memcpy(data, hw->tb.rx_buf, len * sizeof(u8)); + + return len; +} + +static int st_lsm6dsx_spi_write(struct device *dev, u8 addr, int len, + u8 *data) +{ + struct st_lsm6dsx_hw *hw; + struct spi_device *spi; + + if (len >= ST_LSM6DSX_TX_MAX_LENGTH) + return -ENOMEM; + + spi = to_spi_device(dev); + hw = spi_get_drvdata(spi); + + hw->tb.tx_buf[0] = addr; + memcpy(&hw->tb.tx_buf[1], data, len); + + return spi_write(spi, hw->tb.tx_buf, len + 1); +} + +static const struct st_lsm6dsx_transfer_function st_lsm6dsx_transfer_fn = { + .read = st_lsm6dsx_spi_read, + .write = st_lsm6dsx_spi_write, +}; + +static int st_lsm6dsx_spi_probe(struct spi_device *spi) +{ + struct st_lsm6dsx_hw *hw; + + hw = devm_kzalloc(&spi->dev, sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + + spi_set_drvdata(spi, hw); + hw->name = spi->modalias; + hw->dev = &spi->dev; + hw->irq = spi->irq; + hw->tf = &st_lsm6dsx_transfer_fn; + + return st_lsm6dsx_probe(hw); +} + +static const struct of_device_id st_lsm6dsx_spi_of_match[] = { + { + .compatible = "st,lsm6ds3", + .data = ST_LSM6DS3_DEV_NAME, + }, + { + .compatible = "st,lsm6dsm", + .data = ST_LSM6DSM_DEV_NAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); + +static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { + { ST_LSM6DS3_DEV_NAME }, + { ST_LSM6DSM_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); + +static struct spi_driver st_lsm6dsx_driver = { + .driver = { + .name = "st_lsm6dsx_spi", + .of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match), + }, + .probe = st_lsm6dsx_spi_probe, + .id_table = st_lsm6dsx_spi_id_table, +}; +module_spi_driver(st_lsm6dsx_driver); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@xxxxxx>"); +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@xxxxxx>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx spi driver"); +MODULE_LICENSE("GPL v2"); -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
