This adds CPU thermal throttling for the Allwinner A33. It uses the
thermal sensor present in the SoC's GPADC.
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/sun8i-a33.dtsi | 47 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 1fcae81..735ebea 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -43,6 +43,7 @@
*/
#include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
/ {
cpu0_opp_table: opp_table0 {
@@ -79,6 +80,9 @@
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ cooling-min-level = <0>;
+ cooling-max-level = <3>;
+ #cooling-cells = <2>;
};
cpu@2 {
@@ -100,6 +104,49 @@
status = "disabled";
};
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: cpu_alert1 {
+ /* milliCelsius */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
