On 13/12/16 12:37, Jacopo Mondi wrote:
> Add IIO driver for Maxim MAX11100 single-channel ADC.
> Add DT bindings documentation.
>
> Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
Nothing significant to add, but a few comments inline.
Jonathan
> ---
>
> v1 -> v2:
> - incorporated pmeerw's review comments
> - retrieve vref from dts and use that to convert read_raw result
> to mV
> - add device tree bindings documentation
>
> ---
> .../devicetree/bindings/iio/adc/max11100.txt | 17 +++
> drivers/iio/adc/Kconfig | 9 ++
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/max11100.c | 166 +++++++++++++++++++++
> 4 files changed, 193 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/max11100.txt
> create mode 100644 drivers/iio/adc/max11100.c
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/max11100.txt b/Documentation/devicetree/bindings/iio/adc/max11100.txt
> new file mode 100644
> index 0000000..6877c11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/max11100.txt
> @@ -0,0 +1,17 @@
> +* Maxim max11100 Analog to Digital Converter (ADC)
> +
> +Required properties:
> + - compatible: Should be "maxim,max11100"
> + - vref-supply: phandle to the regulator that provides reference voltage
> +
> +Optional properties:
> + - spi-max-frequency: SPI maximum frequency
> +
> +Example:
> +
> +adc0: max11100@0 {
> + compatible = "maxim,max11100";
> + vref-supply = <&adc0_vref>;
> + spi-max-frequency = <240000>;
> +};
> +
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 99c0514..a909484 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -285,6 +285,15 @@ config MAX1027
> To compile this driver as a module, choose M here: the module will be
> called max1027.
>
> +config MAX11100
> + tristate "Maxim max11100 ADC driver"
> + depends on SPI
> + help
> + Say yes here to build support for Maxim max11100 SPI ADC
> +
> + To compile this driver as a module, choose M here: the module will be
> + called max11100.
> +
> config MAX1363
> tristate "Maxim max1363 ADC driver"
> depends on I2C
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 7a40c04..1463044 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
> obj-$(CONFIG_LTC2485) += ltc2485.o
> obj-$(CONFIG_MAX1027) += max1027.o
> +obj-$(CONFIG_MAX11100) += max11100.o
> obj-$(CONFIG_MAX1363) += max1363.o
> obj-$(CONFIG_MCP320X) += mcp320x.o
> obj-$(CONFIG_MCP3422) += mcp3422.o
> diff --git a/drivers/iio/adc/max11100.c b/drivers/iio/adc/max11100.c
> new file mode 100644
> index 0000000..f372ad8
> --- /dev/null
> +++ b/drivers/iio/adc/max11100.c
> @@ -0,0 +1,166 @@
> +/*
> + * iio/adc/max11100.c
> + * Maxim max11100 ADC Driver with IIO interface
> + *
> + * Copyright (C) 2016 Renesas Electronics Corporation
> + * Copyright (C) 2016 Jacopo Mondi
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/delay.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/driver.h>
> +
> +/*
> + * LSB is the ADC single digital step
> + * 1 LSB = (vref / 2 ^ 16)
> + * AIN = (DIN * LSB)
> + */
> +#define MAX11100_LSB_DIV (1 << 16)
> +#define MAX11100_LSB(vref) (vref / MAX11100_LSB_DIV)
> +
> +struct max11100_state {
> + const struct max11100_chip_desc *desc;
> + struct spi_device *spi;
> + int vref_uv;
> + struct mutex lock;
> +};
> +
> +static struct iio_chan_spec max11100_channels[] = {
> + { /* [0] */
> + .type = IIO_VOLTAGE,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 16,
> + .storagebits = 24,
> + .shift = 8,
> + .repeat = 1,
> + .endianness = IIO_BE,
> + },
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + },
> +};
> +
> +static struct max11100_chip_desc {
> + unsigned int num_chan;
> + const struct iio_chan_spec *channels;
> +} max11100_desc = {
> + .num_chan = ARRAY_SIZE(max11100_channels),
> + .channels = max11100_channels,
> +};
> +
> +static int max11100_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + int ret;
> + struct max11100_state *state = iio_priv(indio_dev);
> + uint8_t buffer[3];
> +
> + mutex_lock(&state->lock);
> +
> + ret = spi_read(state->spi, buffer, sizeof(buffer));
> + if (ret) {
> + mutex_unlock(&state->lock);
> + dev_err(&indio_dev->dev, "SPI transfer failed\n");
> + return ret;
> + }
> + mutex_unlock(&state->lock);
> +
> + /* the first 8 bits sent out from ADC must be 0s */
> + if (buffer[0]) {
> + dev_err(&indio_dev->dev, "Invalid value: buffer[0] != 0\n");
> + return -EINVAL;
> + }
> +
> + *val = be16_to_cpu(*(uint16_t *)&buffer[1]);
> + *val = *val * MAX11100_LSB(state->vref_uv) / 1000;
What Peter said.
> +
> + return IIO_VAL_INT;
> +}
> +
> +static const struct iio_info max11100_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = max11100_read_raw,
> +};
> +
> +static int max11100_probe(struct spi_device *spi)
> +{
> + int ret;
> + struct iio_dev *indio_dev;
> + struct regulator *vref_reg;
> + struct max11100_state *state;
> +
> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*state));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + spi_set_drvdata(spi, indio_dev);
> +
> + state = iio_priv(indio_dev);
> + state->spi = spi;
> + state->desc = &max11100_desc;
> +
> + mutex_init(&state->lock);
> +
> + indio_dev->dev.parent = &spi->dev;
> + indio_dev->dev.of_node = spi->dev.of_node;
> + indio_dev->info = &max11100_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = state->desc->channels;
> + indio_dev->num_channels = state->desc->num_chan;
> +
> + vref_reg = devm_regulator_get(&spi->dev, "vref");
> + if (IS_ERR(vref_reg))
> + return PTR_ERR(vref_reg);
> +
> + ret = regulator_enable(vref_reg);
> + if (ret)
> + return ret;
> +
> + state->vref_uv = regulator_get_voltage(vref_reg);
If possible, do this as late as you can. There are boards out there
were, to save hardware, reference voltages are fed from power supply lines
and and exactly what is on those lines may change as the board boots up.
Once you've moved the use of this value to the the _scale bit of read_raw
then it won't get called very often so just do the actual voltage request
there. Do leave the enabling etc here though as otherwise power management
code might turn it off as unused.
> + if (state->vref_uv < 0) {
> + /* dummy regulator "get_voltage" returns -EINVAL as well */
> + ret = -EINVAL;
> + goto disable_regulator;
> + }
> +
> + ret = devm_iio_device_register(&spi->dev, indio_dev);
> + if (ret)
> + goto disable_regulator;
> +
> + return 0;
> +
> +disable_regulator:
> + regulator_disable(vref_reg);
> + return ret;
> +}
> +
> +static const struct of_device_id max11100_ids[] = {
> + {.compatible = "maxim,max11100"},
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, max11100_ids);
> +
> +static struct spi_driver max11100_driver = {
> + .driver = {
> + .name = "max11100",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(max11100_ids),
> + },
> + .probe = max11100_probe,
> +};
> +
> +module_spi_driver(max11100_driver);
> +
> +MODULE_AUTHOR("Jacopo Mondi <jacopo@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Maxim max11100 ADC Driver");
> +MODULE_LICENSE("GPL v2");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
