This patch adds support for TI TMP007 - 16 bit IR thermopile sensor with integrated Math engine.
Sensor takes care of calculating the object temperature with the help of calibrated constants stored in non-volatile memory,
reducing the calculation overhead.
Signed-off-by: Mani Sadhasivam <manivannanece23@xxxxxxxxx>
---
.../devicetree/bindings/iio/temperature/tmp007.txt | 14 +
drivers/iio/temperature/Kconfig | 10 +
drivers/iio/temperature/Makefile | 1 +
drivers/iio/temperature/tmp007.c | 357 +++++++++++++++++++++
4 files changed, 382 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/temperature/tmp007.txt
create mode 100644 drivers/iio/temperature/tmp007.c
diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
new file mode 100644
index 0000000..f4175c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
@@ -0,0 +1,14 @@
+* TI TMP007 - IR thermopile sensor with integrated Math engine
+
+Required properties:
+
+ - compatible: should be "ti,tmp007"
+ - reg: the I2C address of the sensor (changeable via ADR pins)
+
+Example:
+
+tmp007@40 {
+ compatible = "ti,tmp007";
+ reg = <0x40>;
+};
+
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index c4664e5..538ce9e 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -23,6 +23,16 @@ config TMP006
This driver can also be built as a module. If so, the module will
be called tmp006.
+config TMP007
+ tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
+ depends on I2C
+ help
+ If you say yes here you get support for the Texas Instruments
+ TMP007 infrared thermopile sensor with Integrated Math Engine.
+
+ This driver can also be built as a module. If so, the module will
+ be called tmp007.
+
config TSYS01
tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
depends on I2C
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index 02bc79d..f0cf5c5 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -4,5 +4,6 @@
obj-$(CONFIG_MLX90614) += mlx90614.o
obj-$(CONFIG_TMP006) += tmp006.o
+obj-$(CONFIG_TMP007) += tmp007.o
obj-$(CONFIG_TSYS01) += tsys01.o
obj-$(CONFIG_TSYS02D) += tsys02d.o
diff --git a/drivers/iio/temperature/tmp007.c b/drivers/iio/temperature/tmp007.c
new file mode 100644
index 0000000..5b549cc
--- /dev/null
+++ b/drivers/iio/temperature/tmp007.c
@@ -0,0 +1,357 @@
+/*
+ * tmp007.c - Support for TI TMP007 IR thermopile sensor with Integrated Math Engine
+ *
+ * Copyright (c) 2017 Manivannan Sadhasivam <manivannanece23@xxxxxxxxx>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor
+ *
+ * (7-bit I2C slave address (0x40 - 0x47), changeable via ADR pins)
+ *
+ * Note: This driver assumes that the sensor has been calibrated beforehand
+ *
+ * TODO: ALERT irq
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define TMP007_VSENSOR 0x00
+#define TMP007_TDIE 0x01
+#define TMP007_CONFIG 0x02
+#define TMP007_TOBJECT 0x03
+#define TMP007_STATUS 0x04
+#define TMP007_STATUS_MASK 0x05
+#define TMP007_TOBJECT_HIGH_LIMIT 0x06
+#define TMP007_TOBJECT_LOW_LIMIT 0x07
+#define TMP007_TDIE_HIGH_LIMIT 0x08
+#define TMP007_TDIE_LOW_LIMIT 0x09
+#define TMP007_S0_COEFFICIENT 0x0a
+#define TMP007_A1_COEFFICIENT 0x0b
+#define TMP007_A2_COEFFICIENT 0x0c
+#define TMP007_B0_COEFFICIENT 0x0d
+#define TMP007_B1_COEFFICIENT 0x0e
+#define TMP007_B2_COEFFICIENT 0x0f
+#define TMP007_C2_COEFFICIENT 0x10
+#define TMP007_TC0_COEFFICIENT 0x11
+#define TMP007_TC1_COEFFICIENT 0x12
+#define TMP007_MANUFACTURER_ID 0x1e
+#define TMP007_DEVICE_ID 0x1f
+#define TMP007_MEMORY_ACCESS 0x2a
+
+#define TMP007_CONFIG_CONV_EN BIT(12)
+#define TMP007_CONFIG_COMP_EN BIT(5)
+#define TMP007_CONFIG_TC_EN BIT(6)
+#define TMP007_CONFIG_CR_MASK GENMASK(11, 9)
+#define TMP007_CONFIG_CR_SHIFT 9
+
+#define TMP007_STATUS_CONV_READY BIT(14)
+#define TMP007_STATUS_DATA_VALID BIT(9)
+
+#define TMP007_MANUFACTURER_MAGIC 0x5449
+#define TMP007_DEVICE_MAGIC 0x0078
+
+#define TMP007_TEMP_VALID BIT(0)
+#define TMP007_TEMP_SHIFT 2
+
+struct tmp007_data {
+ struct i2c_client *client;
+ u16 config;
+ u16 status_mask;
+};
+
+/* Mode 101, 110, 111 are rarely used. Hence not taken into account */
+static const int tmp007_avgs[5][2] = { {4, 0}, {2, 0}, {1, 0},
+ {0, 500000}, {0, 250000} };
+
+static int tmp007_read_temperature(struct tmp007_data *data, u8 reg)
+{
+ s32 ret;
+ int tries = 50;
+
+ while (tries-- > 0) {
+ ret = i2c_smbus_read_word_swapped(data->client,
+ TMP007_STATUS);
+ if (ret < 0)
+ return ret;
+ if (ret & TMP007_STATUS_CONV_READY)
+ break;
+ msleep(100);
+ }
+
+ if (tries < 0)
+ return -EIO;
+
+ return i2c_smbus_read_word_swapped(data->client, reg);
+}
+
+static int tmp007_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int *val,
+ int *val2, long mask)
+{
+ struct tmp007_data *data = iio_priv(indio_dev);
+ s32 ret;
+ int conv_rate;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ switch (channel->channel2) {
+ case IIO_MOD_TEMP_AMBIENT: /* LSB: 0.03125 degree Celsius */
+ ret = tmp007_read_temperature(data, TMP007_TDIE);
+ if (ret < 0)
+ return ret;
+ *val = sign_extend32(ret, 15) >> TMP007_TEMP_SHIFT;
+ break;
+ case IIO_MOD_TEMP_OBJECT:
+ ret = tmp007_read_temperature(data, TMP007_TOBJECT);
+ if (ret < 0)
+ return ret;
+ *val = sign_extend32(ret, 15) >> TMP007_TEMP_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 31;
+ *val2 = 250000;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ conv_rate = (data->config & TMP007_CONFIG_CR_MASK)
+ >> TMP007_CONFIG_CR_SHIFT;
+ *val = tmp007_avgs[conv_rate][0];
+ *val2 = tmp007_avgs[conv_rate][1];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int tmp007_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int val,
+ int val2, long mask)
+{
+ struct tmp007_data *data = iio_priv(indio_dev);
+ int i;
+
+ if (mask == IIO_CHAN_INFO_SAMP_FREQ) {
+ for (i = 0; i < ARRAY_SIZE(tmp007_avgs); i++) {
+ if ((val == tmp007_avgs[i][0]) &&
+ (val2 == tmp007_avgs[i][1])) {
+ data->config &= ~TMP007_CONFIG_CR_MASK;
+ data->config |= (i << TMP007_CONFIG_CR_SHIFT);
+
+ return i2c_smbus_write_word_swapped(data->client,
+ TMP007_CONFIG,
+ data->config);
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
+static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25");
+
+static struct attribute *tmp007_attributes[] = {
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group tmp007_attribute_group = {
+ .attrs = tmp007_attributes,
+};
+
+
+static const struct iio_chan_spec tmp007_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .modified = 1,
+ .channel2 = IIO_MOD_TEMP_AMBIENT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_TEMP,
+ .modified = 1,
+ .channel2 = IIO_MOD_TEMP_OBJECT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ }
+};
+
+static const struct iio_info tmp007_info = {
+ .read_raw = tmp007_read_raw,
+ .write_raw = tmp007_write_raw,
+ .attrs = &tmp007_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+static bool tmp007_identify(struct i2c_client *client)
+{
+ int manf_id, dev_id;
+
+ manf_id = i2c_smbus_read_word_swapped(client, TMP007_MANUFACTURER_ID);
+ if (manf_id < 0)
+ return false;
+
+ dev_id = i2c_smbus_read_word_swapped(client, TMP007_DEVICE_ID);
+ if (dev_id < 0)
+ return false;
+
+ return (manf_id == TMP007_MANUFACTURER_MAGIC && dev_id == TMP007_DEVICE_MAGIC);
+}
+
+static int tmp007_probe(struct i2c_client *client,
+ const struct i2c_device_id *tmp007_id)
+{
+ struct tmp007_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EOPNOTSUPP;
+
+ if (!tmp007_identify(client)) {
+ dev_err(&client->dev, "TMP007 not found\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = dev_name(&client->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &tmp007_info;
+
+ indio_dev->channels = tmp007_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tmp007_channels);
+
+ /* Set Configuration register:
+ *
+ * 1. Conversion ON
+ * 2. Comparator mode
+ * 3. Transient correction enable
+ *
+ */
+
+ ret = i2c_smbus_read_word_swapped(data->client, TMP007_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ data->config = ret;
+ data->config |= (TMP007_CONFIG_CONV_EN | TMP007_CONFIG_COMP_EN |
+ TMP007_CONFIG_TC_EN);
+
+ ret = i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
+ data->config);
+ if (ret < 0)
+ return ret;
+
+ /* Set Status Mask register:
+ *
+ * 1. Conversion ready enable
+ *
+ */
+
+ ret = i2c_smbus_read_word_swapped(data->client, TMP007_STATUS_MASK);
+ if (ret < 0)
+ return ret;
+
+ data->status_mask = ret;
+ data->status_mask |= TMP007_STATUS_CONV_READY;
+
+ ret = i2c_smbus_write_word_swapped(data->client, TMP007_STATUS_MASK,
+ data->status_mask);
+ if (ret < 0)
+ return ret;
+
+ return iio_device_register(indio_dev);
+}
+
+static int tmp007_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct tmp007_data *data = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
+ data->config & ~TMP007_CONFIG_CONV_EN);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tmp007_suspend(struct device *dev)
+{
+ struct tmp007_data *data = iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev)));
+
+ return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
+ data->config & ~TMP007_CONFIG_CONV_EN);
+}
+
+static int tmp007_resume(struct device *dev)
+{
+ struct tmp007_data *data = iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev)));
+
+ return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
+ data->config | TMP007_CONFIG_CONV_EN);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tmp007_pm_ops, tmp007_suspend, tmp007_resume);
+
+static const struct of_device_id tmp007_of_match[] = {
+ { .compatible = "ti,tmp007", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tmp007_of_match);
+
+static const struct i2c_device_id tmp007_id[] = {
+ { "tmp007", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tmp007_id);
+
+static struct i2c_driver tmp007_driver = {
+ .driver = {
+ .name = "tmp007",
+ .of_match_table = of_match_ptr(tmp007_of_match),
+ .pm = &tmp007_pm_ops,
+ },
+ .probe = tmp007_probe,
+ .remove = tmp007_remove,
+ .id_table = tmp007_id,
+};
+module_i2c_driver(tmp007_driver);
+
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannanece23@xxxxxxxxx>");
+MODULE_DESCRIPTION("TI TMP007 IR thermopile sensor driver");
+MODULE_LICENSE("GPL");
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
