On Mon, 12 Dec 2016, Rob Herring wrote:
> On Fri, Dec 09, 2016 at 03:15:14PM +0100, Benjamin Gaignard wrote:
> > Define bindings for pwm-stm32
> >
> > version 6:
> > - change st,breakinput parameter format to make it usuable on stm32f7 too.
> >
> > version 2:
> > - use parameters instead of compatible of handle the hardware configuration
> >
> > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> > ---
> > .../devicetree/bindings/pwm/pwm-stm32.txt | 33 ++++++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt
> >
> > diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
> > new file mode 100644
> > index 0000000..866f222
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
> > @@ -0,0 +1,33 @@
> > +STMicroelectronics STM32 Timers PWM bindings
> > +
> > +Must be a sub-node of an STM32 Timers device tree node.
> > +See ../mfd/stm32-timers.txt for details about the parent node.
> > +
> > +Required parameters:
> > +- compatible: Must be "st,stm32-pwm".
> > +- pinctrl-names: Set to "default".
> > +- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
> > + For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
> > +
> > +Optional parameters:
> > +- st,breakinput: Arrays of three u32 <index level filter> to describe break input configurations.
> > + "index" indicates on which break input the configuration should be applied.
> > + "level" gives the active level (0=low or 1=high) for this configuration.
> > + "filter" gives the filtering value to be applied.
> > +
> > +Example:
> > + timers@40010000 {
>
> timer@...
No, it should be timers.
The 's' is intentional, since this parent (MFD) device houses 3
different types of timers. The "timer" node is a child of this one.
> With that,
>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
>
>
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "st,stm32-timers";
> > + reg = <0x40010000 0x400>;
> > + clocks = <&rcc 0 160>;
> > + clock-names = "clk_int";
> > +
> > + pwm {
> > + compatible = "st,stm32-pwm";
> > + pinctrl-0 = <&pwm1_pins>;
> > + pinctrl-names = "default";
> > + st,breakinput = <0 1 5>;
> > + };
> > + };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
