[PATCH v7 04/12] dt-bindings: simplified bindings for single-user gpio mux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
 .../devicetree/bindings/mux/mux-controller.txt     | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/mux/mux-controller.txt b/Documentation/devicetree/bindings/mux/mux-controller.txt
index 42b2177e5ae1..4e89df8b2392 100644
--- a/Documentation/devicetree/bindings/mux/mux-controller.txt
+++ b/Documentation/devicetree/bindings/mux/mux-controller.txt
@@ -125,3 +125,29 @@ An example mux controller might look like this:
 		reg = <0x50>;
 		#mux-control-cells = <1>;
 	};
+
+
+Combinded controller and consumer of a GPIO mux
+-----------------------------------------------
+
+For the common case of a single consumer of a GPIO controlled mux, there is
+a simplified binding which will instantiate an implicit mux controller. Just
+specify a mux-gpios property with the same interpretation as in mux-gpio.txt.
+Note that other properties described in mux-gpio.txt are not available in
+this simplified form and that the mux controller is unnamed. If you need
+more than one mux controller, a shared mux controller or if you need a
+specific idle-state, use the more flexible binding with the mux controller
+in its own node.
+
+Example:
+
+	adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+
+		channels = "sync-1", "in", "out", "sync-2";
+	};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux