This series is aimed at improving the support for baylibre-acme[1] power measurement capes. We would like to add support for power-cycling of devices measured using TI INA226 ADCs. An example use case would be measuring the power consumption of a development board during boot and power-cycling it remotely using a GPIO power switch. The first patch proposes to add a new DT binding for describing simple power switches. The second adds a simple IIO driver exposing a single attribute. The motivation for using the IIO framework is the fact that we already use it for reading the data from the ADC and that power-cycling the measured devices is an integral part of our use case. Users would find it convenient to be able to use libiio as the single interface. [1] http://baylibre.com/acme/ Bartosz Golaszewski (2): devicetree: power: add bindings for GPIO-driven power switches iio: misc: add support for GPIO power switches .../bindings/power/gpio-power-switch.txt | 25 ++++ drivers/iio/Kconfig | 1 + drivers/iio/Makefile | 1 + drivers/iio/misc/Kconfig | 17 +++ drivers/iio/misc/Makefile | 6 + drivers/iio/misc/gpio-power-switch.c | 127 +++++++++++++++++++++ 6 files changed, 177 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/gpio-power-switch.txt create mode 100644 drivers/iio/misc/Kconfig create mode 100644 drivers/iio/misc/Makefile create mode 100644 drivers/iio/misc/gpio-power-switch.c -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
