Linux Kernel I2C

• Thread Index

• [PATCH v5] i2c: i801: Register optional lis3lv02d I2C device on Dell machines
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2 0/3] Add ST lsm6dso i3c support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i801: Register optional lis3lv02d I2C device on Dell machines
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• RE: [PATCH v2 2/3] i3c: add i3c_get_device_id helper
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• RE: [PATCH v2 0/3] Add ST lsm6dso i3c support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Add ST lsm6dso i3c support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: i801: Register optional lis3lv02d I2C device on Dell machines
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH V2] i2c: busses: tegra: Add suspend-resume support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V4] drivers: i2c: tegra: fix checkpatch defects
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 2/3] i3c: add i3c_get_device_id helper
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• [PATCH v2 1/3] regmap: add i3c bus support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v2 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v2 2/3] i3c: add i3c_get_device_id helper
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v2 0/3] Add ST lsm6dso i3c support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH v4] i2c: i801: Register optional lis3lv02d I2C device on Dell machines
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH V4] drivers: i2c: tegra: fix checkpatch defects
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH V2] i2c: busses: tegra: Add suspend-resume support
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH V1] i2c: busses: tegra: Add suspend-resume support
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH V2] i2c: busses: tegra: Add suspend-resume support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V4] drivers: i2c: tegra: fix checkpatch defects
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] i2c: fsi: Create busses for all ports
  • From: "Oliver O'Halloran" <oohall@xxxxxxxxx>
• Re: [PATCH V1] i2c: busses: tegra: Add suspend-resume support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V4] drivers: i2c: tegra: fix checkpatch defects
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH V4] drivers: i2c: tegra: fix checkpatch defects
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• [PATCH V3] drivers: i2c: tegra: fix checkpatch defects
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH V2] drivers: i2c: tegra: fix checkpatch defects
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• [PATCH V2] i2c: busses: tegra: Add suspend-resume support
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH V1] i2c: busses: tegra: Add suspend-resume support
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH v10 1/1] Add support for IPMB driver
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] i2c: fsi: Create busses for all ports
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v10 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH v10 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• Re: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH v9 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• Re: [PATCHv7 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Add max_read_len quirk
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 11/13] drivers: Introduce variants for bus_find_device()
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 06/10] mfd / platform: cros_ec: Reorganize platform and mfd includes
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: omap: Add new compatible for J721E SoCs
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v2] i2c: xiic: Add max_read_len quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 04/13] drivers: Add generic helper to match by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCHv7 3/3] Documentation: ABI: Add i2c-slave-mqueue sysfs documentation
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• [PATCHv7 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH 06/10] mfd / platform: cros_ec: Reorganize platform and mfd includes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: mv64xxx: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] i2c: xiic: Add max_read_len quirk
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCHv7 1/3] dt-bindings: i2c: document bindings for i2c-slave-mqueue
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH v3] i2c: mux/i801: Switch to use descriptor passing
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 8/8] usb: dwc3: qcom: Improve error handling
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 5/8] soc: qcom: geni: Add support for ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] i2c: xiic: Add max_read_len quirk
  • From: Robert Hancock <hancock@xxxxxxxxxxxxx>
• Re: [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 06/10] mfd / platform: cros_ec: Reorganize platform and mfd includes
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] i2c: acpi: Use available IRQ helper functions
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 4/6] i2c: core: Move ACPI IRQ handling to probe time
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv7 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] i2c: mux/i801: Switch to use descriptor passing
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a reserved GPIO list
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 06/10] mfd / platform: cros_ec: Reorganize platform and mfd includes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: i2c: mv64xxx: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 8/8] usb: dwc3: qcom: Improve error handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH] i2c: fsi: Create busses for all ports
  • From: Oliver <oohall@xxxxxxxxx>
• Re: [PATCH] i2c: fsi: Create busses for all ports
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: mux/i801: Switch to use descriptor passing
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• [PATCH v4] i2c: i801: Register optional lis3lv02d I2C device on Dell machines
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v2] i2c: xiic: Add max_read_len quirk
  • From: Robert Hancock <hancock@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: mux/i801: Switch to use descriptor passing
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 2/2 v3] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: René van Dorst <opensource@xxxxxxxxxx>
• Re: [PATCH v3] i2c: bcm2835: Model Divider in CCF
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v3] i2c: mux/i801: Switch to use descriptor passing
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/6] i2c: core: Move ACPI IRQ handling to probe time
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] i2c: acpi: Use available IRQ helper functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Add max_read_len quirk
  • From: Robert Hancock <hancock@xxxxxxxxxxxxx>
• [PATCH 06/10] mfd / platform: cros_ec: Reorganize platform and mfd includes
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/2 v3] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Jan Breuer <jan.breuer@xxxxxxxxx>
• Re: [PATCH 2/2 v3] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH] dt-bindings: i2c-stm32: document optional dmas
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 2/2 v3] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Jan Breuer <jan.breuer@xxxxxxxxx>
• [PATCH 2/2 v3] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 1/2 v3] dt-bindings: i2c: i2c-mt7621: Add bindings for MediaTek MT7621/28/88 I2C
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH v2] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/8] i2c: i2c-qcom-geni: Provide support for ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/8] i2c: i2c-qcom-geni: Signify successful driver probe
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/8] pinctrl: qcom: sdm845: Provide ACPI support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/8] pinctrl: msm: Add ability for drivers to supply a reserved GPIO list
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 5/8] soc: qcom: geni: Add support for ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 6/8] usb: dwc3: qcom: Add support for booting with ACPI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 7/8] usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 8/8] usb: dwc3: qcom: Improve error handling
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [RFC PATCH 22/57] drivers: i2c: Use generic helper to match device by acpi_dev
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: mux/i801: Switch to use descriptor passing
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Add max_read_len quirk
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH] i2c: fsi: Create busses for all ports
  • From: Oliver <oohall@xxxxxxxxx>
• [PATCH] i2c: xiic: Add max_read_len quirk
  • From: Robert Hancock <hancock@xxxxxxxxxxxxx>
• [PATCH v3] i2c: mux/i801: Switch to use descriptor passing
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 1/2] i2c: i2c-mlx: I2C SMBus driver for Mellanox BlueField SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] i2c: mux: pca9541: add support for PCA9641
  • From: Pradeep Srinivasan <pradeeps@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/1] Add support for IPMB driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4 5/5] usb: typec: ucsi: ccg: add runtime pm workaround
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v4 4/5] i2c: nvidia-gpu: resume ccgx i2c client
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v4 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v4 2/5] i2c: nvidia-gpu: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v4 1/5] i2c: nvidia-gpu: refactor master_xfer
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v4 0/5] usb: typec: ucsi: ccg: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• Re: [PATCH v2] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC PATCH 06/57] drivers: i2c: i2c-core: Use bus_find_device_by_of_node helper
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [RFC PATCH 22/57] drivers: i2c: Use generic helper to match device by acpi_dev
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: mux: pinctrl: use flexible-array member and struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: mv64xxx: Add YAML schemas
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] i2c: fsi: Create busses for all ports
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: mux/i801: Switch to use descriptor passing
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• RE: [PATCH v1 i2c-next] i2c: mlxcpld: prevent devices from being unbounded from driver via sysfs
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• [PATCH 5/5] i2c: headers: reformat header comment and update copyright
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/5] i2c: headers: update docs about I2C_CLIENT_*
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/5] i2c: core: always have a named variable in arguments
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/5] i2c: headers: always have a named variable in arguments
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/5] i2c: headers: don't use 'dev' as adapter variable
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/5] i2c: improve main header file
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] MAINTAINERS: add DT bindings to i2c-mv64xxx
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: Convert to use GPIO descriptors
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] i2c: fsi: Create busses for all ports
  • From: "Oliver O'Halloran" <oohall@xxxxxxxxx>
• Re: [net-next,v4 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.2
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v3] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v3] i2c: bcm2835: Model Divider in CCF
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PULL REQUEST] i2c for 5.2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 i2c-next] i2c: mlxcpld: prevent devices from being unbounded from driver via sysfs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/8] arm: add I2C DT binding docs to various platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/6] i2c: add DT binding docs to MAINTAINERS
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 5/8] MAINTAINERS: add I2C DT bindings to Rockchip platform
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] MAINTAINERS: add DT bindings to i2c-mv64xxx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH REPOST v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH REPOST v8 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH REPOST v8 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH REPOST v8 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: iop: Use GPIO descriptors
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH] i2c: iop: Use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH v3 2/5] i2c: nvidia-gpu: add runtime pm support
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH REPOST v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• [PATCH REPOST v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH REPOST v8 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH REPOST v8 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH REPOST v8 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2] drivers: i2c: tegra: fix checkpatch defects
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V1] i2c: busses: tegra: Add suspend-resume support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH V2] drivers: i2c: tegra: fix checkpatch defects
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH V1] i2c: busses: tegra: Add suspend-resume support
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Avoid error message on deferred probe
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH -next] eeprom: at24: Remove set but not used variable 'addr'
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: use struct_size() in devm_kzalloc()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 3/3] Documentation: ABI: Add i2c-slave-mqueue sysfs documentation
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• [PATCH 2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: i2c: document bindings for i2c-slave-mqueue
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• [PATCH 0/3] introduce i2c-slave-mqueue
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH 22/22] docs: fix broken documentation links
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• [PATCH] i2c: s3c2410: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] i2c: mux/i801: Switch to use descriptor passing
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] i2c: mux: arb-gpio: Rewrite to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: pca: Fix GPIO lookup code
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: pca: Fix GPIO lookup code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] i2c: mux/i801: Switch to use descriptor passing
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH V2] drivers: i2c: tegra: fix checkpatch defects
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V2] drivers: i2c: tegra: fix checkpatch defects
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V1] i2c: busses: tegra: Add suspend-resume support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH V2] drivers: i2c: tegra: fix checkpatch defects
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• [PATCH V1] i2c: busses: tegra: Add suspend-resume support
  • From: Bitan Biswas <bbiswas@xxxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: "Wang, Haiyue" <haiyue.wang@xxxxxxxxxxxxxxx>
• [PATCH 00/22] Some documentation fixes
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• [PATCH] eeprom: at24: use struct_size() in devm_kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] i2c: mux: Use struct_size() in devm_kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next,v4 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next,v4 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH -next] eeprom: at24: Remove set but not used variable 'addr'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH v1 i2c-next] i2c: mlxcpld: prevent devices from being unbounded from driver via sysfs
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [net-next,v4 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] i2c: core: Tidy up handling of init_irq
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] i2c: core: Move ACPI IRQ handling to probe time
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/6] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] i2c: acpi: Use available IRQ helper functions
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] i2c: core: Allow whole core to use i2c_dev_irq_from_resources
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• [PATCH v3] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• [PATCH v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v8 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v8 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v8 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• [net-next,v4 0/2] Enable SFP on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [net-next,v4 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [net-next,v4 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v2 1/2] eeprom: at24: use devm_i2c_new_dummy_device()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 4/6] i2c: core: Move ACPI IRQ handling to probe time
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/6] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/6] i2c: core: Tidy up handling of init_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/6] i2c: acpi: Use available IRQ helper functions
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/6] i2c: core: Allow whole core to use i2c_dev_irq_from_resources
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/6] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 2/5] i2c: nvidia-gpu: add runtime pm support
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH 7/8] MAINTAINERS: add I2C DT bindings to Versatile platform
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/8] MAINTAINERS: add I2C DT bindings to Nomadik/U300 platforms
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/6] i2c: acpi: Use available IRQ helper functions
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [net-next,v3 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [net-next,v3 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [net-next,v3 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] i2c: acpi: Use available IRQ helper functions
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/6] MAINTAINERS: add DT bindings to i2c-mv64xxx
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH] hwmon: pmbus: protect read-modify-write with lock
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2 3/6] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH] i2c: synquacer: fix synquacer_i2c_doxfer() return value
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH] i2c: synquacer: fix synquacer_i2c_doxfer() return value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: synquacer: fix synquacer_i2c_doxfer() return value
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH v2] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Stefan Roese <sr@xxxxxxx>
• [net-next,v3 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [net-next,v3 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [net-next,v3 0/2] Enable SFP on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• [PATCH] MAINTAINERS: Karthikeyan Ramasubramanian is MIA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: jz4780: Drop dependency on MACH_JZ4780
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: synquacer: fix synquacer_i2c_doxfer() return value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-meson: update with SPDX Licence identifier
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 i2c] i2c: mlxcpld: Fix wrong initialization order in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Allow selecting BCM2835 I2C controllers on ARCH_BRCMSTB
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: Use __maybe_unused instead of #if CONFIG_PM
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH v2 4/6] i2c: core: Move ACPI IRQ handling to probe time
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/6] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/6] i2c: core: Allow whole core to use i2c_dev_irq_from_resources
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 6/6] i2c: core: Tidy up handling of init_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/6] i2c: acpi: Use available IRQ helper functions
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/6] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH] i2c: tegra: Avoid error message on deferred probe
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 10/10] docs: fix broken documentation links
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [PATCH v3 4/5] i2c: nvidia-gpu: resume ccgx i2c client
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] i2c: nvidia-gpu: add runtime pm support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] i2c: nvidia-gpu: refactor master_xfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: i2c: mv64xxx: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH 3/8] MAINTAINERS: add I2C DT bindings to LPC platforms
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: "Wang, Haiyue" <haiyue.wang@xxxxxxxxxxxxxxx>
• [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] i2c: layerscape: use PIO when fail to request dma channel
  • From: Yang Li <pku.leo@xxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH] i2c: layerscape: use PIO when fail to request dma channel
  • From: Qiang Zhao <qiang.zhao@xxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: "Wang, Haiyue" <haiyue.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c/slave-mqueue v5] i2c: slave-mqueue: add a slave backend to receive and queue messages
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v7 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: "Ruslan Babayev (fib)" <fib@xxxxxxxxx>
• [PATCH v3 5/5] usb: typec: ucsi: ccg: add runtime pm workaround
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v3 4/5] i2c: nvidia-gpu: resume ccgx i2c client
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v3 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v3 2/5] i2c: nvidia-gpu: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v3 1/5] i2c: nvidia-gpu: refactor master_xfer
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v3 0/5] usb: typec: ucsi: ccg: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH] i2c: jz4780: Drop dependency on MACH_JZ4780
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v7 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v7 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v7 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [RFC 0/4] TI camera serdes - I2C address translation draft
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] MAINTAINERS: add I2C DT bindings to Rockchip platform
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v6 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH 10/10] docs: fix broken documentation links
  • From: Federico Vaga <federico.vaga@xxxxxxxxxx>
• RE: [PATCH v2 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [RFC 0/4] TI camera serdes - I2C address translation draft
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 4/5] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: core: Move ACPI IRQ handling to probe time
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: acpi: Use available IRQ helper functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 4/5] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] I2C IRQ Probe Improvements
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] i2c: core: Tidy up handling of init_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] i2c: acpi: Use available IRQ helper functions
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] i2c: core: Move ACPI IRQ handling to probe time
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v6 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v6 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v6 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v6 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: core: Move ACPI IRQ handling to probe time
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: core: Move ACPI IRQ handling to probe time
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: core: Move ACPI IRQ handling to probe time
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] MAINTAINERS: add DT bindings to i2c-ocores
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 4/5] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: core: Move ACPI IRQ handling to probe time
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH 1/8] MAINTAINERS: add I2C DT bindings to Zynq platform
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 6/8] MAINTAINERS: add I2C DT bindings to STI architecture
  • From: Patrice CHOTARD <patrice.chotard@xxxxxx>
• Re: [PATCH] i2c: synquacer: fix synquacer_i2c_doxfer() return value
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andreas Schwab <schwab@xxxxxxx>
• Re: [PATCH 2/8] MAINTAINERS: add I2C DT bindings to DaVinci platform
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH 7/8] MAINTAINERS: add I2C DT bindings to Versatile platform
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 8/8] MAINTAINERS: add I2C DT bindings to vt8500 architecture
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 6/8] MAINTAINERS: add I2C DT bindings to STI architecture
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/8] MAINTAINERS: add I2C DT bindings to Nomadik/U300 platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 5/8] MAINTAINERS: add I2C DT bindings to Rockchip platform
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/8] MAINTAINERS: add I2C DT bindings to LPC platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/8] MAINTAINERS: add I2C DT bindings to DaVinci platform
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/8] MAINTAINERS: add I2C DT bindings to Zynq platform
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/8] arm: add I2C DT binding docs to various platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 5/6] MAINTAINERS: add DT bindings to Renesas R-Car I2C drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 6/6] MAINTAINERS: add DT bindings to i2c-xlp9xx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/6] MAINTAINERS: add DT bindings to i2c-ocores
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/6] MAINTAINERS: add DT bindings to i2c-mv64xxx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/6] MAINTAINERS: add DT bindings to i2c-emev2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/6] MAINTAINERS: add DT bindings to i2c-altera
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/6] i2c: add DT binding docs to MAINTAINERS
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH] i2c: synquacer: fix synquacer_i2c_doxfer() return value
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v2 5/5] usb: typec: ucsi: ccg: add runtime pm workaround
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v2 4/5] i2c: nvidia-gpu: resume ccgx i2c client
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v2 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v2 2/5] i2c: nvidia-gpu: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v2 1/5] i2c: nvidia-gpu: refactor master_xfer
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH v2 0/5] usb: typec: ucsi: ccg: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• Re: [PATCH 1/4] i2c: nvidia-gpu: add runtime pm support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH 3/4] i2c: nvidia-gpu: resume ccgx i2c client
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• RE: [PATCH 1/4] i2c: nvidia-gpu: add runtime pm support
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH 10/10] docs: fix broken documentation links
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• RE: [PATCH v9 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH 10/10] docs: fix broken documentation links
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v5 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v5 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v5 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH] i2c: i2c-meson: update with SPDX Licence identifier
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] eeprom: at24: use devm_i2c_new_dummy_device()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4 2/3] i2c-ocores: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v4 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v4 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v4 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH 4/5] i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] I2C IRQ Probe Improvements
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] i2c: acpi: Use available IRQ helper functions
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] i2c: core: Move ACPI IRQ handling to probe time
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] i2c: core: Tidy up handling of init_irq
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] i2c: acpi: Factor out getting the IRQ from ACPI
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] eeprom: at24: use devm_i2c_new_dummy_device()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/2] eeprom: at24: drop unnecessary label
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 0/2] at24: use devm_i2c_new_dummy_device()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/2] eeprom: at24: use devm_i2c_new_dummy_device()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH 1/2] eeprom: at24: use devm_i2c_new_dummy_device()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/2] eeprom: at24: use devm_i2c_new_dummy_device()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/2] eeprom: at24: drop unnecessary label
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/2] at24: use devm_i2c_new_dummy_device()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.2
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v9 1/1] Add support for IPMB driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] i2c: nvidia-gpu: resume ccgx i2c client
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: nvidia-gpu: add runtime pm support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 5.2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] i2c: core: add device-managed version of i2c_new_dummy
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/4] usb: typec: ucsi: ccg: add runtime pm workaround
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH 3/4] i2c: nvidia-gpu: resume ccgx i2c client
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH 2/4] usb: typec: ucsi: ccg: enable runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH 1/4] i2c: nvidia-gpu: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• [PATCH 0/4] usb: typec: ucsi: ccg: add runtime pm support
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• Re: [PATCH v8 3/3] mfd: da9063: occupy second I2C address, too
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] mfd: da9063: occupy second I2C address, too
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v8 2/3] i2c: core: add device-managed version of i2c_new_dummy
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v8 1/3] i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v8 2/3] i2c: core: add device-managed version of i2c_new_dummy
  • From: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
  • From: Kieran Bingham <kieran@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] mfd: da9063: occupy second I2C address, too
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v8 2/3] i2c: core: add device-managed version of i2c_new_dummy
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v8 1/3] i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• [PATCH v8 3/3] mfd: da9063: occupy second I2C address, too
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 2/3] i2c: core: add device-managed version of i2c_new_dummy
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 1/3] i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 0/3] i2c: improve i2c_new_{device|dummy}
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 i2c] i2c: mlxcpld: Fix wrong initialization order in probe
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• [PATCH v2] i2c: i2c-stm32f7: fix the get_irq error cases
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v3 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH AUTOSEL 5.0 31/34] i2c: designware: ratelimit 'transfer when suspended' errors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix the get_irq error cases
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• [PATCH v3 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v3 2/3] i2c-ocore: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v3 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH] i2c: i2c-stm32f7: fix the get_irq error cases
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: René van Dorst <opensource@xxxxxxxxxx>
• Re: [PATCH v2 v2 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 v2 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 v2 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH] i2c: at91: handle TXRDY interrupt spam
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: handle TXRDY interrupt spam
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH v2 v2 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: i801: avoid panic if ioreamp fails
  • From: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
• Re: [GIT PULL] at24: updates for v5.2
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/3] i2c: i801: avoid panic if ioreamp fails
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/3] i2c: i801: avoid panic if ioreamp fails
  • From: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
• Re: [PATCH] i2c: Allow selecting BCM2835 I2C controllers on ARCH_BRCMSTB
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/3] i2c: i801: avoid panic if ioreamp fails
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 3/3] i2c: i801: avoid panic if ioreamp fails
  • From: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.2
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH] i2c: Allow selecting BCM2835 I2C controllers on ARCH_BRCMSTB
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PULL REQUEST] i2c for 5.2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Sumit Batra <sumit.batra@xxxxxxx>
• [PATCH] i2c: sh_mobile: Fix compilation warning
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Sumit Batra <sumit.batra@xxxxxxx>
• [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH 1/1] i2c: iproc: Add multi byte read-write support for slave mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Intel Amber Lake I2C/GpioInt issue, ELAN touchpad unusable
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [PATCH] i2c: tegra: use busendiannes variable
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• RE: [EXT] Re: [PATCH 1/3] dt-bindings: i2c: add optional mul-value property to binding
  • From: Leo Li <leoyang.li@xxxxxxx>
• [PATCH v9 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH v9 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH 1/3] dt-bindings: i2c: add optional mul-value property to binding
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• RE: [EXT] Re: [PATCH 2/2] arm64: dts: fsl: ls1046a: Add the guts node in dts
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• [PATCH v2] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• Re: [PATCH v8 1/1] Add support for IPMB driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v8 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH v8 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• Re: [PATCH v2 v2 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 v2 2/3] i2c-ocore: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 v2 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 v2 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v2 v2 2/3] i2c-ocore: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v2 v2 1/3] dt-bindings: i2c: extend existing opencore bindings.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v2 v2 0/3] Extend dt bindings to support I2C on sifive devices and a fix broken IRQ in polling mode.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH] i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c-mux-gpio: Split plat- and dt-specific code up
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c-mux-gpio: Split plat- and dt-specific code up
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c-mux-gpio: Split plat- and dt-specific code up
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: add optional mul-value property to binding
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH AUTOSEL 4.14 48/95] i2c: omap: Enable for ARCH_K3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: "Ruslan Babayev (fib)" <fib@xxxxxxxxx>
• Re: [PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH RFC v2 net-next] Enable SFP support on ACPI
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [PATCH RFC v2 net-next 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v7 1/1] Add support for IPMB driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 v1 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH v1 v1 1/3] dt-bindings: i2c: add documentation for adding SiFive I2C driver
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH] i2c: at91: handle TXRDY interrupt spam
  • From: Raag Jadav <raagjadav@xxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v7 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH v7 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• Re: [PATCH 2/2] eeprom: ee1004: Deal with nack on page selection
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/2] eeprom: ee1004: Deal with nack on page selection
  • From: Dreamcat4 <dreamcat4@xxxxxxxxx>
• Re: [PATCH 2/2] eeprom: ee1004: Deal with nack on page selection
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] dts: r7s9210: Add RZ/A2 devices
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v1 v1 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1 v1 1/3] dt-bindings: i2c: add documentation for adding SiFive I2C driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 2/2] eeprom: ee1004: Deal with nack on page selection
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 1/2] eeprom: ee1004: Move selected page detection to a separate function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v1 v1 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v1 v1 2/3] i2c-ocore: sifive: add support for i2c device on FU540-c000 SoC.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v1 v1 1/3] dt-bindings: i2c: add documentation for adding SiFive I2C driver
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v1 v1 0/3] Add dt bindings to support I2C on sifive devices and a fix for polling mode i2c transfers.
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [decode-dimms] Crucial Ballistix BLS2K16G4D30AESB, cannot decode / understand timings
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [decode-dimms] Crucial Ballistix BLS2K16G4D30AESB, cannot decode / understand timings
  • From: Dreamcat4 <dreamcat4@xxxxxxxxx>
• Re: [decode-dimms] Crucial Ballistix BLS2K16G4D30AESB, cannot decode / understand timings
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH] i2c: at91: handle TXRDY interrupt spam
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• RE: [EXT] Re: [PATCH 2/2] arm64: dts: fsl: ls1046a: Add the guts node in dts
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• Re: [PATCH 2/2] arm64: dts: fsl: ls1046a: Add the guts node in dts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH net-next 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Enable SFP driver on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• [PATCH 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] net: phy: sfp: enable i2c-bus detection on ACPI based systems
  • From: Ruslan Babayev <ruslan@xxxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] i2c: Prevent runtime suspend of adapter when Host Notify is required
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• RE: [PATCH] i2c: imx: Use __maybe_unused instead of #if CONFIG_PM
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• [PATCH] i2c: bcm2835: Model Divider in CCF
  • From: Annaliese McDermond <nh6z@xxxxxxxx>
• [PATCH] i2c: imx: Use __maybe_unused instead of #if CONFIG_PM
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: Add i2c block read functionality to i2cget.
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• RE: [PATCH v6 1/1] Add support for IPMB driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: handle TXRDY interrupt spam
  • From: Raag Jadav <raagjadav@xxxxxxxxx>
• [PATCH v6 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH v6 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.1
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c for 5.1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: i2c: riic: document r7s9210 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 RESEND] i2c-piix4: Add Hygon Dhyana SMBus support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: core: ratelimit 'transfer when suspended' errors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.20-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [GIT PULL] at24: updates for v5.2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH v2 RESEND] i2c-piix4: Add Hygon Dhyana SMBus support
  • From: Pu Wen <puwen@xxxxxxxx>
• Re: [PATCH v4 0/1] Add support for IPMB driver
  • From: Corey Minyard <minyard@xxxxxxx>
• RE: [PATCH v5 1/1] Add support for IPMB driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• RE: [PATCH v4 0/1] Add support for IPMB driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: i2c: riic: document r7s9210 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: add optional mul-value property to binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v4 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• Re: [PATCH v4 0/1] Add support for IPMB driver
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH v5 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH v5 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• RE: [PATCH v4 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Prevent runtime suspend of adapter when Host Notify is required
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: synquacer: fix enumeration of slave devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: friendly takeover of i2c-gpio driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RFT] i2c: designware: ratelimit 'transfer when suspended' errors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RFT] i2c: designware: ratelimit 'transfer when suspended' errors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Prevent runtime suspend of adapter when Host Notify is required
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: handle TXRDY interrupt spam
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Prevent runtime suspend of adapter when Host Notify is required
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Prevent runtime suspend of adapter when Host Notify is required
  • From: Keijo Vaara <ferdasyn@xxxxxxxxxxxxxx>
• Re: [PATCH RFT] i2c: designware: ratelimit 'transfer when suspended' errors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/1] Add support for IPMB driver
  • From: Corey Minyard <minyard@xxxxxxx>
• RE: [PATCH v4 1/1] Add support for IPMB driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• RE: [PATCH v4 0/1] Add support for IPMB driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH RFT] i2c: designware: ratelimit 'transfer when suspended' errors
  • From: skidnik <skidnik@xxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.20-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PULL REQUEST] i2c-mux for 4.20-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 1/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• [PATCH v4 0/1] Add support for IPMB driver
  • From: Asmaa Mnebhi <Asmaa@xxxxxxxxxxxx>
• I2C delay due to maintainer illness
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH 6/7] ARM: dts: r7s9210-rza2mevb: Add Ethernet support
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] i2c: Prevent runtime suspend of adapter when Host Notify is required
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: r7s9210-rza2mevb: Add SDHI support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/7] ARM: dts: r7s9210-rza2mevb: Add Ethernet support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: dts: r7s9210: Add SDHI support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: i2c: riic: document r7s9210 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: dts: r7s9210: Add RIIC support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] ARM: dts: r7s9210: Add Ethernet support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>