Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mika Westerberg writes:

> On Sun, May 05, 2019 at 03:05:23PM -0700, Ruslan Babayev wrote:
>> Lookup I2C adapter using the "i2c-bus" device property on ACPI based
>> systems similar to how it's done with DT.
>> 
>> An example DSD describing an SFP on an ACPI based system:
>> 
>> Device (SFP0)
>> {
>>     Name (_HID, "PRP0001")
>>     Name (_DSD, Package ()
>>     {
>>         ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
>>         Package () {
>>             Package () { "compatible", "sff,sfp" },
>>             Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
>
> Hmm, ACPI has I2cSerialBusV2() resource for this purpose. Why you are not
> using that?

I am not an ACPI expert, but my understanding is I2cSerialBusV2() is
used for slave connections. I am trying to reference an I2C controller
here.



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux