Linux GPIO

• Thread Index

• [libgpiod][PATCH 03/14] core: export gpiod_is_gpiochip_device()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 00/22] RISC-V Kendryte K210 support improvements
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7 00/22] RISC-V Kendryte K210 support improvements
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH v4 1/3] gpio: mvebu: add pwm support for Armada 8K/7K
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v4 2/3] arm64: dts: armada: add pwm offsets for ap/cp gpios
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v4 0/3] gpio: mvebu: Armada 8K/7K PWM support
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v4 3/3] dt-bindings: ap806: document marvell,gpio pwm-offset property
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• RE: [PATCH 2/3] dt-bindings: pinctrl: Added binding for ZynqMP pinctrl driver
  • From: Sai Krishna Potthuri <lakshmis@xxxxxxxxxx>
• Re: [PATCH v4 3/5] gpio: msc313: MStar MSC313 GPIO driver
  • From: Daniel Palmer <daniel@xxxxxxxx>
• Re: [PATCH v7 00/22] RISC-V Kendryte K210 support improvements
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] gpio: sysfs: Try numbered exports if symbolic names fail
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• [PATCH] gpio: aspeed: Lock GPIO pin used as IRQ
  • From: Troy Lee <troy_lee@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: mt7621-gpio: convert bindings to YAML format
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 2/2] pinctrl: qcom: Add SM8350 pinctrl driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 3/9] dt-bindings: pwm: Update DT binding docs to support SiFive FU740 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 6/9] dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 8/9] dt-bindings: riscv: Update YAML doc to support SiFive HiFive Unmatched board
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: gpio: Update DT binding docs to support SiFive FU740 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/9] dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v7 12/22] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 10/22] dt-bindings: pinctrl: Document canaan,k210-fpioa bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 17/22] riscv: Add SiPeed MAIX DOCK board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 18/22] riscv: Add SiPeed MAIX GO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 20/22] riscv: Add Kendryte KD233 board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 22/22] riscv: Add Canaan Kendryte K210 SD card defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 21/22] riscv: Update Canaan Kendryte K210 defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 19/22] riscv: Add SiPeed MAIXDUINO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 15/22] riscv: Update Canaan Kendryte K210 device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 16/22] riscv: Add SiPeed MAIX BiT board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 14/22] riscv: Add Canaan Kendryte K210 FPIOA driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 13/22] riscv: Add Canaan Kendryte K210 reset controller
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 11/22] dt-binding: mfd: Document canaan,k210-sysctl bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 09/22] dt-bindings: reset: Document canaan,k210-rst bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 08/22] dt-binding: clock: Document canaan,k210-clk bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 07/22] dt-bindings: Add Canaan vendor prefix
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 06/22] riscv: cleanup Canaan Kendryte K210 sysctl driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 05/22] riscv: Use vendor name for K210 SoC support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 04/22] riscv: Fix builtin DTB handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 03/22] riscv: Enable interrupts during syscalls with M-Mode
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 02/22] riscv: Fix sifive serial driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 01/22] riscv: Fix kernel time_init()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v7 00/22] RISC-V Kendryte K210 support improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO Controller
  • From: Punit Agrawal <punit1.agrawal@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO Controller
  • From: Punit Agrawal <punit1.agrawal@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: gpio: Add compatible string for AM64 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [gpio:fixes] BUILD SUCCESS 263ade7166a2e589c5b605272690c155c0637dcb
  • From: kernel test robot <lkp@xxxxxxxxx>
• [gpio:for-next] BUILD SUCCESS b8fbfef1595c2640e7e355532a3a855623ad2c60
  • From: kernel test robot <lkp@xxxxxxxxx>
• [gpio:devel] BUILD SUCCESS 40b37008eb5a300ea35aa83432c213b6028313d5
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: mt7621-gpio: convert bindings to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] pinctrl: qcom: Clear possible pending irq when remuxing GPIOs
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 3/3] pinctrl: qcom: Clear possible pending irq when remuxing GPIOs
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/3] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/3] pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [pinctrl:for-next] BUILD SUCCESS 274380f9eb09fa49cd4fda83f438f5c8366b13ec
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:fixes] BUILD SUCCESS e8873c0afd34beb67ec492cd648dd0095b911f65
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• Re: [PATCH v3 6/6] dt-bindings: ap806: document gpio pwm-offset property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: pinctrl: Added binding for ZynqMP pinctrl driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: gpio: Add compatible string for AM64 SoC
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH 2/3] dt-bindings: pinctrl: Added binding for ZynqMP pinctrl driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO Controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO Controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpio: sysfs: Try numbered exports if symbolic names fail
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.11-rc1
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• linusw/devel baseline: 120 runs, 1 regressions (v5.10-rc4-85-g40b37008eb5a)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• linusw/for-next build: 7 builds: 0 failed, 7 passed, 3 warnings (v5.10-rc6-93-gb8fbfef1595c)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes build: 7 builds: 0 failed, 7 passed, 3 warnings (v5.10-rc6-7-g263ade7166a2e)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc4-85-g40b37008eb5a)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.11-rc1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH -next 3/3] arm64: dts: sparx5: Add SGPIO irq support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH -next 2/3] dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH -next 1/3] pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH -next 0/3] pinctrl: pinctrl-microchip-sgpio: Add interrupt controller support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v6 13/22] riscv: Add Canaan Kendryte K210 reset controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 12/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v5 11/11] pwm: Add Raspberry Pi Firmware based PWM bus
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.11-rc1
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Michal Suchánek <msuchanek@xxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.11-rc1
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH] RFC: drivers: gpio: helper for generic pin IRQ handling
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.11-rc1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.11-rc1
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [GIT PULL] gpio: updates for v5.11-rc1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [GIT PULL] gpio: updates for v5.11-rc1
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [PATCH 2/4] USB: serial: ftdi_sio: Report the valid GPIO lines to gpiolib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: remove the blank line in pinctrl_register()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/4] gpiolib: cdev: Flag invalid GPIOs as used
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 1/3] gpio: gpio-hisi: Add HiSilicon GPIO support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH] RFC: drivers: gpio: helper for generic pin IRQ handling
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio: eic-sprd: break loop when getting NULL device resource
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] firmware: xilinx: Added pinctrl support
  • From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xxxxxxxxxx>
• [PATCH 3/3] pinctrl: Added Xilinx ZynqMP pinctrl driver support
  • From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: pinctrl: Added binding for ZynqMP pinctrl driver
  • From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xxxxxxxxxx>
• [PATCH 0/3] pinctrl: Added ZynqMP pinctrl driver
  • From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xxxxxxxxxx>
• Re: [PATCH v1 1/3] gpio: gpio-hisi: Add HiSilicon GPIO support
  • From: luojiaxing <luojiaxing@xxxxxxxxxx>
• Re: [PATCH v2] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/3] pinctrl: qcom: Clear possible pending irq when remuxing GPIOs
  • From: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
• [PATCH] gpio: eic-sprd: break loop when getting NULL device resource
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• [PATCH v6 22/22] riscv: Add Canaan Kendryte K210 SD card defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 21/22] riscv: Update Canaan Kendryte K210 defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 19/22] riscv: Add SiPeed MAIXDUINO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 20/22] riscv: Add Kendryte KD233 board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 18/22] riscv: Add SiPeed MAIX GO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 17/22] riscv: Add SiPeed MAIX DOCK board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 15/22] riscv: Update Canaan Kendryte K210 device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 16/22] riscv: Add SiPeed MAIX BiT board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 14/22] riscv: Add Canaan Kendryte K210 FPIOA driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 13/22] riscv: Add Canaan Kendryte K210 reset controller
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 12/22] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 11/22] dt-binding: mfd: Document canaan,k210-sysctl bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 10/22] dt-bindings: pinctrl: Document canaan,k210-fpioa bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 09/22] dt-bindings: reset: Document canaan,k210-rst bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 07/22] dt-bindings: Add Canaan vendor prefix
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 08/22] dt-binding: clock: Document canaan,k210-clk bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 05/22] riscv: Use vendor name for K210 SoC support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 06/22] riscv: cleanup Canaan Kendryte K210 sysctl driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 04/22] riscv: Fix builtin DTB handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 03/22] riscv: Enable interrupts during syscalls with M-Mode
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 02/22] riscv: Fix sifive serial driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 00/22] RISC-V Kendryte K210 support improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v6 01/22] riscv: Fix kernel time_init()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v5 12/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 1/3] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling
  • From: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
• [pinctrl:fixes] BUILD SUCCESS 5f4592bc20c86a8c65a24601d033a3e3f06939e7
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:for-next] BUILD SUCCESS 09fe5dc62aae1327d98186e1e9299a2e4f62a055
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/9] arch: riscv: add board and SoC DT file support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH] RFC: drivers: gpio: helper for generic pin IRQ handling
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH] RFC: drivers: gpio: helper for generic pin IRQ handling
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH] RFC: drivers: gpio: helper for generic pin IRQ handling
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [RFC PATCH] RFC: drivers: gpio: helper for generic pin IRQ handling
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• Re: [PATCH v5 12/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• RFC: introduce typedef for gpio numbers (driver side) ?
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Michal Suchánek <msuchanek@xxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] drivers: gpio: put virtual gpio device into their own submenu
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] drivers: gpio: put virtual gpio device into their own submenu
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] drivers: gpio: put virtual gpio device into their own submenu
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• Re: [PATCH v3] drivers: gpio: put virtual gpio device into their own submenu
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] pinctrl: qcom: Add SM8350 pinctrl driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/3] drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl: rt2880: add binding document
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• [PATCH v2 0/2] pinctrl: ralink: pinctrl driver for the rt2880 family
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH v5 21/21] riscv: Add Canaan Kendryte K210 SD card defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 20/21] riscv: Update Canaan Kendryte K210 defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 19/21] riscv: Add Kendryte KD233 board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 18/21] riscv: Add SiPeed MAIXDUINO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 17/21] riscv: Add SiPeed MAIX GO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 16/21] riscv: Add SiPeed MAIX DOCK board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 15/21] riscv: Add SiPeed MAIX BiT board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 14/21] riscv: Update Canaan Kendryte K210 device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 13/21] riscv: Add Canaan Kendryte K210 FPIOA driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 12/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 10/21] dt-binding: mfd: Document canaan,k210-sysctl bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 09/21] dt-bindings: pinctrl: Document canaan,k210-fpioa bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 08/21] dt-bindings: reset: Document canaan,k210-rst bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 07/21] dt-binding: clock: Document canaan,k210-clk bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 06/21] dt-bindings: Add Canaan vendor prefix
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 05/21] riscv: Use vendor name for K210 SoC support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 04/21] riscv: Fix builtin DTB handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 03/21] riscv: Enable interrupts during syscalls with M-Mode
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 02/21] riscv: Fix sifive serial driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 01/21] riscv: Fix kernel time_init()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 00/21] RISC-V Kendryte K210 support improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: rt2880: add binding document
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• [PATCH v2 9/9] riscv: dts: add initial board data for the SiFive HiFive Unmatched
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 8/9] dt-bindings: riscv: Update YAML doc to support SiFive HiFive Unmatched board
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 7/9] riscv: dts: add initial support for the SiFive FU740-C000 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 5/9] dt-bindings: gpio: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 3/9] dt-bindings: pwm: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 6/9] dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 1/9] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 4/9] dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 2/9] dt-bindings: spi: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v2 0/9] arch: riscv: add board and SoC DT file support
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• Re: (subset) [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [PATCH v3] drivers: gpio: add virtio-gpio guest driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v3] drivers: gpio: add virtio-gpio guest driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: rt2880: add binding document
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3] drivers: gpio: add virtio-gpio guest driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3] drivers: gpio: add virtio-gpio guest driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• [PATCH v3] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH v3] drivers: gpio: put virtual gpio device into their own submenu
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v2] drivers: gpio: put virtual gpio device into their own submenu
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• [PATCH 3/3] staging: mt7621-pinctrl: remove driver from staging
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• [PATCH 2/3] pinctrl: ralink: add a pinctrl driver for the rt2880 family
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: pinctrl: rt2880: add binding document
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• [PATCH 0/3] pinctrl: ralink: pinctrl driver for the rt2880 family
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• Re: [PATCH] pinctrl: remove the blank line in pinctrl_register()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1] pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] pinctrl: remove the blank line in pinctrl_register()
  • From: Zhaoyu Liu <zackary.liu.pro@xxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] drivers: gpio: put virtual gpio device into their own submenu
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 1/4] gpiolib: cdev: Flag invalid GPIOs as used
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/4] gpiolib: cdev: Flag invalid GPIOs as used
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: 0001-add-amlogic-gpio-to-irq
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: 0001-add-amlogic-gpio-to-irq
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: luojiaxing <luojiaxing@xxxxxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: luojiaxing <luojiaxing@xxxxxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: luojiaxing <luojiaxing@xxxxxxxxxx>
• Re: 0001-add-amlogic-gpio-to-irq
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH v2] drivers: gpio: put virtual gpio device into their own submenu
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH v2 1/2] drivers: gpio: put virtual gpio device into their own submenu
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: 0001-add-amlogic-gpio-to-irq
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v4 0/5] Add GPIO support for MStar/SigmaStar ARMv7
  • From: Daniel Palmer <daniel@xxxxxxxx>
• Re: [PATCH v2 1/2] drivers: gpio: put virtual gpio device into their own submenu
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: 0001-add-amlogic-gpio-to-irq
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 1/2] drivers: gpio: put virtual gpio device into their own submenu
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v6 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: mt7621-gpio: convert bindings to YAML format
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• [PATCH v2 2/2] pinctrl: qcom: Add SM8350 pinctrl driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: André Przywara <andre.przywara@xxxxxxx>
• Re: [linux-sunxi] [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: André Przywara <andre.przywara@xxxxxxx>
• [gpio:for-next] BUILD SUCCESS 0f8d9ac8978bc4b12ef523c4fc1732226c7ddbdf
  • From: kernel test robot <lkp@xxxxxxxxx>
• [gpio:devel] BUILD SUCCESS dd0fa81143f60cbc90cd6ce1c9a2c51a7b40046e
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:for-next] BUILD SUCCESS 9b185cd4fdcafa16d6da8224e177f807d7737bd1
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/3] gpio: gpio-hisi: Add HiSilicon GPIO support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• linusw/for-next baseline: 125 runs, 1 regressions (v5.10-rc6-55-g0f8d9ac8978b)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel baseline: 128 runs, 5 regressions (v5.10-rc4-48-gdd0fa81143f6)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next build: 7 builds: 0 failed, 7 passed, 3 warnings (v5.10-rc6-55-g0f8d9ac8978b)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc4-48-gdd0fa81143f6)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: André Przywara <andre.przywara@xxxxxxx>
• Re: [linux-sunxi] [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxx>
• Re: [linux-sunxi] [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: Clément Péron <peron.clem@xxxxxxxxx>
• [gpio:devel] BUILD SUCCESS c47d9e1b734361a5d809fae02a268b85ab0f95ee
  • From: kernel test robot <lkp@xxxxxxxxx>
• [gpio:fixes] BUILD SUCCESS 77c12bf3839479c3963433043e2051d738f3ab63
  • From: kernel test robot <lkp@xxxxxxxxx>
• [gpio:gpio-debugfs-todo] BUILD SUCCESS 0dc4d47b86c841d28148ab3897a81d25eb617a48
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:fixes] BUILD SUCCESS c3c882898d07157a1b083aaaddf0e8346373d111
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:devel] BUILD SUCCESS 6e261d1090d6db0e9dd22978b6f38a2c58558a3f
  • From: kernel test robot <lkp@xxxxxxxxx>
• linusw/devel baseline: 124 runs, 3 regressions (v5.10-rc4-47-gc47d9e1b7343)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes baseline: 104 runs, 1 regressions (v5.10-rc6-6-g77c12bf38394)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc4-47-gc47d9e1b7343)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/fixes build: 7 builds: 0 failed, 7 passed, 3 warnings (v5.10-rc6-6-g77c12bf38394)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH] gpio: Add TODO item for debugfs interface
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND PATCH v6 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] gpio: just plain warning when nonexisting gpio requested
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 0/5] Add GPIO support for MStar/SigmaStar ARMv7
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: gpio: Use Tegra186-specific include guard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] gpio: tegra: Convert to gpio_irq_chip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Howto listen to/handle gpio state changes ? Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Sean Anderson <seanga2@xxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v4 07/21] dt-binding: clock: Document canaan,k210-clk bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v4 01/21] riscv: Fix kernel time_init()
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH 4/4] USB: serial: ftdi_sio: Drop GPIO line checking dead code
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 2/4] USB: serial: ftdi_sio: Report the valid GPIO lines to gpiolib
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 1/4] gpiolib: cdev: Flag invalid GPIOs as used
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v4 04/21] riscv: Fix builtin DTB handling
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: 0001-add-amlogic-gpio-to-irq
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v4] pinctrl: amd: remove debounce filter setting in IRQ type setting
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH v4] pinctrl: amd: remove debounce filter setting in IRQ type setting
  • From: Coiby Xu <coiby.xu@xxxxxxxxx>
• Re: [PATCH v4 13/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v4 13/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: Add TODO item for debugfs interface
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] gpio: gpio-hisi: Add HiSilicon GPIO support
  • From: luojiaxing <luojiaxing@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add SM8350 pinctrl driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom-pmic-gpio: Add support for pmx55
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: aspeed: Fix GPIO requests on pass-through banks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: 0001-add-amlogic-gpio-to-irq
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] drivers: gpio: add virtio-gpio guest driver
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v4] pinctrl: amd: remove debounce filter setting in IRQ type setting
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH -next] pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/3] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] Documentation: gpio: fix typo and unclear legacy API section
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: fix low level output voltage issue
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpio: Add TODO item for debugfs interface
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH V2] pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] gpio: fixes for v5.10-rc7
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio: mxs: Remove unused .id_table support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/1] pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add SM8350 pinctrl driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [RESEND PATCH v6 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add SM8350 pinctrl driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] drivers: gpio: add virtio-gpio guest driver
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v2 3/3] pinctrl: qcom: Clear possible pending irq when remuxing GPIOs
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• [PATCH v2 2/2] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH v2 1/2] drivers: gpio: put virtual gpio device into their own submenu
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH] drivers: gpio: add virtio-gpio guest driver
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• [PATCH] drivers: gpio: put virtual gpio device into their own submenu
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 2/3] drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 3/3] drivers: gpio: amd8111: use SPDX-License-Identifier
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 1/3] drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH v5 08/11] input: raspberrypi-ts: Release firmware handle when not needed
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v2 3/3] pinctrl: qcom: Clear possible pending irq when remuxing GPIOs
  • From: Maulik Shah <mkshah@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
  • From: Punit Agrawal <punit1.agrawal@xxxxxxxxxxxxx>
• [GIT PULL] gpio: fixes for v5.10-rc7
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 2/4] gpio: visconti: Add Toshiba Visconti GPIO support
  • From: Punit Agrawal <punit1.agrawal@xxxxxxxxxxxxx>
• Re: [PATCH] gpio: mpc8xxx: resolve coverity warnings
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v5 01/11] firmware: raspberrypi: Keep count of all consumers
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• RE: [PATCH] gpio: mpc8xxx: resolve coverity warnings
  • From: "Biwen Li (OSS)" <biwen.li@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO Controller
  • From: Punit Agrawal <punit1.agrawal@xxxxxxxxxxxxx>
• Re: [PATCH] gpio: mpc8xxx: resolve coverity warnings
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• RE: [PATCH] gpio: mpc8xxx: resolve coverity warnings
  • From: "Biwen Li (OSS)" <biwen.li@xxxxxxxxxxx>
• Re: [PATCH v5 01/11] firmware: raspberrypi: Keep count of all consumers
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] gpio: mpc8xxx: resolve coverity warnings
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH] gpio: mpc8xxx: resolve coverity warnings
  • From: Biwen Li <biwen.li@xxxxxxxxxxx>
• [PATCH 2/2] pinctrl: qcom: Add SM8350 pinctrl driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• RE: [PATCH 1/4] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxxxx>
• Re: [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:devel] BUILD SUCCESS 552a9cc02b0e8a63d802b3a80ceefce0c89cee8a
  • From: kernel test robot <lkp@xxxxxxxxx>
• [pinctrl:for-next] BUILD SUCCESS be100b6604d1e01960577b0f628d75bab6ea8c21
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 15/18] i2c: i2c-core-acpi: Add i2c_acpi_dev_name()
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxx>
• Re: [PATCH 3/8] pinctrl: sunxi: Add support for the Allwinner H616-R pin controller
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxx>
• Re: [PATCH v5 07/11] staging: vchiq: Release firmware handle on unbind
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v5 06/11] soc: bcm: raspberrypi-power: Release firmware handle on unbind
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 05/11] reset: raspberrypi: Release firmware handle on unbind
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 04/11] gpio: raspberrypi-exp: Release firmware handle on unbind
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 03/11] clk: bcm: rpi: Release firmware handle on unbind
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 02/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get()
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 01/11] firmware: raspberrypi: Keep count of all consumers
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [RESEND PATCH v6 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [RESEND PATCH v6 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [RESEND PATCH v6 0/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/8] pinctrl: sunxi: Add support for the Allwinner H616-R pin controller
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v4 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v5 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] drivers: gpio: add virtio-gpio guest driver
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 3/8] pinctrl: sunxi: Add support for the Allwinner H616-R pin controller
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v2] gpio: just plain warning when nonexisting gpio requested
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [gpio:gpio-descriptors-usb] BUILD SUCCESS 46c1a5ed966186b574c4146a3757ed689723e251
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] gpio: mvebu: Armada 8K/7K PWM support
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/18] property: Add support for calling fwnode_graph_get_endpoint_by_id() for fwnode->secondary
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v5 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 06/18] software_node: amend software_node_unregister_node_group() to perform unregistration of array in reverse order to be consistent with software_node_unregister_nodes()
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v1 1/3] gpio: gpio-hisi: Add HiSilicon GPIO support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 16/18] i2c: i2c-core-base: Use the new i2c_acpi_dev_name() in i2c_set_dev_name()
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH] gpio: zynq: fix reference leak in zynq_gpio functions
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 16/18] i2c: i2c-core-base: Use the new i2c_acpi_dev_name() in i2c_set_dev_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/3] MAINTAINERS: Add maintainer for HiSilicon GPIO driver
  • From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
• [PATCH v1 1/3] gpio: gpio-hisi: Add HiSilicon GPIO support
  • From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
• [PATCH v1 0/3] gpio: gpio-hisi: Add HiSilicon GPIO support
  • From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
• [PATCH v1 3/3] arm64: defconfig: enable GPIO_HISI
  • From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
• [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH 3/4] dt-bindings: riscv: Update YAML doc to support SiFive HiFive Unmatched board
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH 2/4] riscv: dts: add initial support for the SiFive FU740-C000 SoC
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH 0/4] arch: riscv: add board and SoC DT file support
  • From: Yash Shah <yash.shah@xxxxxxxxxx>
• [PATCH v3 5/6] arm64: dts: armada: add pwm offsets for ap/cp gpios
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v3 6/6] dt-bindings: ap806: document gpio pwm-offset property
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v3 4/6] gpio: mvebu: add pwm support for Armada 8K/7K
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v3 3/6] gpio: mvebu: switch pwm duration registers to regmap
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v3 2/6] gpio: mvebu: update Armada XP per-CPU comment
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v3 1/6] gpio: mvebu: fix potential user-after-free on probe
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v3 0/6] gpio: mvebu: Armada 8K/7K PWM support
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH v5 08/11] input: raspberrypi-ts: Release firmware handle when not needed
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v4 21/21] riscv: Add Canaan Kendryte K210 SD card defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 20/21] riscv: Update Canaan Kendryte K210 defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 19/21] riscv: Add Kendryte KD233 board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 18/21] riscv: Add SiPeed MAIXDUINO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 17/21] riscv: Add SiPeed MAIX GO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 16/21] riscv: Add SiPeed MAIX DOCK board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 15/21] riscv: Add SiPeed MAIX BiT board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 14/21] riscv: Update Canaan Kendryte K210 device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 13/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 12/21] riscv: Add Canaan Kendryte K210 FPIOA driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 09/21] dt-bindings: pinctrl: Document canaan,k210-fpioa bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 10/21] dt-binding: mfd: Document canaan,k210-sysctl bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 08/21] dt-bindings: reset: Document canaan,k210-rst bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 07/21] dt-binding: clock: Document canaan,k210-clk bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 06/21] dt-bindings: Add Canaan vendor prefix
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 05/21] riscv: Use vendor name for K210 SoC support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 02/21] riscv: Fix sifive serial driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 04/21] riscv: Fix builtin DTB handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 03/21] riscv: Enable interrupts during syscalls with M-Mode
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 01/21] riscv: Fix kernel time_init()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 00/21] RISC-V Kendryte K210 support improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• linusw/devel baseline: 100 runs, 2 regressions (v5.10-rc4-34-g0f2c7af45d7ee)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next baseline: 108 runs, 2 regressions (v5.10-rc4-34-g0f2c7af45d7e)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/devel build: 7 builds: 0 failed, 7 passed, 11 warnings (v5.10-rc4-34-g0f2c7af45d7ee)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• linusw/for-next build: 7 builds: 0 failed, 7 passed, 22 warnings (v5.10-rc4-34-g0f2c7af45d7e)
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH 16/18] i2c: i2c-core-base: Use the new i2c_acpi_dev_name() in i2c_set_dev_name()
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 05/18] software_node: Alter software_node_unregister_nodes() to unregister the array in reverse order
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH -next] pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: core: Fix unused variable build warnings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] pinctrl: samsung: Pull for v5.11
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] pinctrl: sh-pfc: Updates for v5.11 (take two)
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• [GIT PULL] pinctrl: samsung: Pull for v5.11
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Alex Elder <elder@xxxxxxxx>
• Re: [PATCH v5 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio: mvebu: add pwm support for Armada 8K/7K
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH v2 0/3] gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 06/18] software_node: amend software_node_unregister_node_group() to perform unregistration of array in reverse order to be consistent with software_node_unregister_nodes()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio: mvebu: add pwm support for Armada 8K/7K
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] gpiolib: do not print err message for EPROBE_DEFER
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v4 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] gpiolib: do not print err message for EPROBE_DEFER
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RESEND PATCH 3/4] gpio: xilinx: Modify bitmap_set_value() calls
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 14/18] acpi: utils: Add function to fetch dependent acpi_devices
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 14/18] acpi: utils: Add function to fetch dependent acpi_devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] gpio: tegra: Convert to gpio_irq_chip
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH][next] gpio: ath79: Fix fall-through warning for Clang
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH][next] gpiolib: acpi: Fix fall-through warnings for Clang
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] gpiolib: Don't free if pin ranges are not defined
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: serial: xr_serial: Add gpiochip support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v5 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v5 0/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v3 12/21] riscv: Add Canaan Kendryte K210 FPIOA driver
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 12/21] riscv: Add Canaan Kendryte K210 FPIOA driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] MAINTAINERS: Add entries for Toshiba Visconti GPIO controller
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: gpio: Add bindings for Toshiba Visconti GPIO Controller
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• [PATCH v3 0/4] gpio: visconti: Add Toshiba Visconti GPIO support
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• [PATCH v3 2/4] gpio: visconti: Add Toshiba Visconti GPIO support
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• [PATCH v3 4/4] arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• Re: [PATCH v1] gpio: dwapb: mask/unmask IRQ when disable/enable it
  • From: luojiaxing <luojiaxing@xxxxxxxxxx>
• Re: [PATCH 01/18] property: Return true in fwnode_device_is_available for node types that do not implement this operation
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 10/18] ipu3-cio2: Rename ipu3-cio2.c to allow module to be built from multiple source files retaining ipu3-cio2 name
  • From: Bingbu Cao <bingbu.cao@xxxxxxxxxxxxxxx>
• Re: [PATCH 10/18] ipu3-cio2: Rename ipu3-cio2.c to allow module to be built from multiple source files retaining ipu3-cio2 name
  • From: Bingbu Cao <bingbu.cao@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 2/4] gpio: visoconti: Add Toshiba Visconti GPIO support
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• Re: [PATCH 01/18] property: Return true in fwnode_device_is_available for node types that do not implement this operation
  • From: Bingbu Cao <bingbu.cao@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] gpio: zynq: fix reference leak in zynq_gpio functions
  • From: Qinglang Miao <miaoqinglang@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v4 2/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 14/18] acpi: utils: Add function to fetch dependent acpi_devices
  • From: Dan Scally <djrscally@xxxxxxxxx>
• [PATCH v3 21/21] riscv: Add Canaan Kendryte K210 SD card defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 20/21] riscv: Update Canaan Kendryte K210 defconfig
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 19/21] riscv: Add Kendryte KD233 board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 18/21] riscv: Add SiPeed MAIXDUINO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 17/21] riscv: Add SiPeed MAIX GO board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 16/21] riscv: Add SiPeed MAIX DOCK board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 15/21] riscv: Add SiPeed MAIX BiT board device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 14/21] riscv: Update Canaan Kendryte K210 device tree
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 13/21] riscv: Add Canaan Kendryte K210 reset controller
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 12/21] riscv: Add Canaan Kendryte K210 FPIOA driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 11/21] riscv: Add Canaan Kendryte K210 clock driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 10/21] dt-binding: mfd: Document canaan,k210-sysctl bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 09/21] dt-bindings: pinctrl: Document canaan,k210-fpioa bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 08/21] dt-bindings: reset: Document canaan,k210-rst bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 07/21] dt-binding: clock: Document canaan,k210-clk bindings
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 06/21] dt-bindings: Add Canaan vendor prefix
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 05/21] riscv: Use vendor name for K210 SoC support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 04/21] riscv: Fix builtin DTB handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 03/21] riscv: Enable interrupts during syscalls with M-Mode
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 01/21] riscv: Fix kernel time_init()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 02/21] riscv: Fix sifive serial driver
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 00/21] RISC-V Kendryte K210 support improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH 07/18] software_node: Add support for fwnode_graph*() family of functions
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH kernel v4 6/8] genirq/irqdomain: Move hierarchical IRQ cleanup to kobject_release
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 04/18] software_node: Enforce parent before child ordering of nodes array for software_node_register_nodes()
  • From: Dan Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Dan Scally <djrscally@xxxxxxxxx>
• [PATCH v1 1/1] gpiolib: Don't free if pin ranges are not defined
  • From: Will McVicker <willmcvicker@xxxxxxxxxx>
• [PATCH v1 0/1] gpiolib: Don't free if pin ranges are not defined
  • From: Will McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH kernel v4 5/8] genirq: Add free_irq hook for IRQ descriptor and use for mapping disposal
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH kernel v4 5/8] genirq: Add free_irq hook for IRQ descriptor and use for mapping disposal
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] of: Fix property supplier parsing
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 3/3] pinctrl: qcom: Clear possible pending irq when remuxing GPIOs
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH kernel v4 2/8] genirq/irqdomain: Clean legacy IRQ allocation
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [libgpiod][PATCH v2] build: allow building with pre-v5.5 kernel headers
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/18] property: Add support for calling fwnode_graph_get_endpoint_by_id() for fwnode->secondary
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 17/18] gpio: gpiolib-acpi: Export acpi_get_gpiod()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 16/18] i2c: i2c-core-base: Use the new i2c_acpi_dev_name() in i2c_set_dev_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/18] property: Add support for calling fwnode_graph_get_endpoint_by_id() for fwnode->secondary
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 14/18] acpi: utils: Add function to fetch dependent acpi_devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 14/18] acpi: utils: Add function to fetch dependent acpi_devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] of: Fix property supplier parsing
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: mvebu: fix potential user-after-free on probe
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH 17/18] gpio: gpiolib-acpi: Export acpi_get_gpiod()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 12/18] acpi: Add acpi_dev_get_next_match_dev() and macro to iterate through acpi_devices matching a given _HID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 11/18] media: v4l2-core: v4l2-async: Check possible match in match_fwnode based on sd->fwnode->secondary
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/18] property: Add support for calling fwnode_graph_get_endpoint_by_id() for fwnode->secondary
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/18] software_node: amend software_node_unregister_node_group() to perform unregistration of array in reverse order to be consistent with software_node_unregister_nodes()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 05/18] software_node: Alter software_node_unregister_nodes() to unregister the array in reverse order
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/18] software_node: Enforce parent before child ordering of nodes array for software_node_register_nodes()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/18] software_node: Enforce parent before child ordering of nodes array for software_node_register_nodes()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/18] software_node: Fix failure to put() and get() references to children in software_node_get_next_child()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/18] property: Add support for calling fwnode_graph_get_endpoint_by_id() for fwnode->secondary
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/18] property: Add support for calling fwnode_graph_get_endpoint_by_id() for fwnode->secondary
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/18] property: Return true in fwnode_device_is_available for node types that do not implement this operation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] ipu3: Add driver for dummy INT3472 ACPI device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 06/18] software_node: amend software_node_unregister_node_group() to perform unregistration of array in reverse order to be consistent with software_node_unregister_nodes()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] gpio: xra1403: remove unneeded spi_set_drvdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH][next] gpiolib: acpi: Fix fall-through warnings for Clang
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 16/18] i2c: i2c-core-base: Use the new i2c_acpi_dev_name() in i2c_set_dev_name()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 15/18] i2c: i2c-core-acpi: Add i2c_acpi_dev_name()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 17/18] gpio: gpiolib-acpi: Export acpi_get_gpiod()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH][next] gpiolib: acpi: Fix fall-through warnings for Clang
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] gpio: zynq: fix reference leak in zynq_gpio functions
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: dwapb: fix NULL pointer dereference at dwapb_gpio_suspend()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 10/21] dt-binding: Document canaan,k210-sysctl bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] gpio: omap: handle deferred probe with dev_err_probe() for gpiochip_add_data()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2 09/21] dt-bindings: Document canaan,k210-fpioa bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] gpio: xra1403: remove unneeded spi_set_drvdata()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] gpio: dwapb: Remove unnecessary error message
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>