Re: [PATCH v2 0/4] Allwinner H6 RSB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jan 03, 2021 at 04:00:03AM -0600, Samuel Holland wrote:
> The Allwinner H6 SoC contains an RSB controller. It is almost completely
> undocumented, so it was missed when doing the initial SoC bringup.
> 
> This series adds the clock/reset, pin configuration, and device tree
> node needed to use the RSB controller. Since RSB is faster, simpler, and
> generally more reliable than the I2C controller IP in the SoC, switch to
> using it where possible.
> 
> This was tested on an Orange Pi 3 and a Pine H64 model B. This series
> does not switch the Pine H64 to use RSB, as doing so would prevent
> accessing the external RTC that shares the I2C bus.
> 
> Changes v1->v2:
>   - Put the new values at the end of the DT binding headers
> 
> Samuel Holland (4):
>   clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset
>   pinctrl: sunxi: h6-r: Add s_rsb pin functions
>   arm64: dts: allwinner: h6: Add RSB controller node
>   arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection

For the whole series,

Acked-by: Maxime Ripard <mripard@xxxxxxxxxx>

Thanks!
Maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux