Re: [PATCH v4 2/4] gpio: visconti: Add Toshiba Visconti GPIO support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-12-16 09:11, Nobuhiro Iwamatsu wrote:

[...]

> +       for (i = 0; i < num_irq; i++) {
> +               desc = irq_to_desc(priv->irq[i]);
> +               desc->status_use_accessors |= IRQ_NOAUTOEN;
> +               if (devm_request_irq(dev, priv->irq[i],
> +                                    visconti_gpio_irq_handler, 0, name, priv)) {
> +                       dev_err(dev, "failed to request IRQ[%d]\n", i);
> +                       return -ENOENT;
> +               }
> +       }

This should not be needed either when using hiearchical IRQs,
also the irqchip maintainers will beat us up for poking around in the
descs like this.

I understand that the processing equivalent to request_irq() is processed
by the irqchip frame work (or GIC driver). Is this correct?

request_irq() is reserved to endpoint drivers (the driver for the device
driving the IRQ line). If this is indeed a hierarchical irqchip, the
line allocation will be driven from the GPIO framework, and request_irq() will perform the activation. There isn't anything that this driver should
do directly other than configuring its own state and passing the request
along to the parent controller.

And yes, mucking with the irq descriptor will get you in massive trouble,
never do that.

Thanks,

        M.
--
Jazz is not dead. It just smells funny...



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux