Linux ARM MSM
[Prev Page][Next Page]
- [PATCH V6 4/6] scsi: ufs: qcom: Align unipro clk attributes configuration as per HPG, (continued)
- [PATCH net-next 0/2] net: qrtr: Few qrtr fixes,
Sricharan Ramabadhran
- [PATCH V3 0/4] Enable IPQ5018 USB2 support,
Nitheesh Sekar
- [PATCH v6 0/4] add clock controller of qca8386/qca8084,
Luo Jie
- [PATCH 0/2] pinctrl: qcom: lpass-lpi: allow slew rate bit in main pin config register,
Krzysztof Kozlowski
- [RFT PATCH 1/2] arm64: dts: qcom: apq8096-db820c: fix missing clock populate,
Krzysztof Kozlowski
- [PATCH V2] clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequencies,
Devi Priya
- [PATCH] bus: mhi: ep: Do not allocate event ring element on stack,
Manivannan Sadhasivam
- [PATCH V2] clk: qcom: clk-alpha-pll: Use determine_rate instead of round_rate,
Devi Priya
- [PATCH] dt-bindings: firmware: Add documentation for qcom,platform-parts-info,
Naman Jain
- [PATCH v2 0/4] MPM pin mappings,
Konrad Dybcio
- [PATCH v2] arm64: dts: ipq5018: Correct uart1_pins pinconf,
Ziyang Huang
- [PATCH v1 0/5] Add multimode invoke request IOCTl support,
Ekansh Gupta
- [PATCH 1/1] arm64: dts: ipq5018: Correct uart1_pins pinconf, hzy
- [PATCH] arm64: dts: qcom: split pmr735d into 2,
Neil Armstrong
- [PATCH v5] usb: typec: qcom: Update the logic of regulator enable and disable,
Hui Liu via B4 Relay
- [PATCH] clk: qcom: gcc-msm8996: Remove RPM bus clocks,
Konrad Dybcio
- [PATCH v2] clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks,
Varadarajan Narayanan
- [PATCH v12 0/4] Enable IPQ5332 USB2,
Varadarajan Narayanan
- [PATCH v1] misc: fastrpc: Clean buffers on remote invocation failures,
Ekansh Gupta
- [PATCH v1] misc: fastrpc: Reset metadata buffer to avoid incorrect free,
Ekansh Gupta
- [PATCH v1] misc: fastrpc: Free DMA handles for RPC calls with no arguments,
Ekansh Gupta
- [PATCH v11 0/4] Enable IPQ5332 USB2,
Varadarajan Narayanan
- [PATCH V3] dt-bindings: usb: dwc3: Add IPQ5018 compatible, Nitheesh Sekar
- [PATCH 16/16] drm/msm/dpu: add cdm blocks to dpu snapshot,
Abhinav Kumar
- [PATCH 11/16] drm/msm/dpu: add an API to setup the CDM block for writeback,
Abhinav Kumar
- [PATCH 15/16] drm/msm/dpu: add NV12 in the list of supported WB formats,
Abhinav Kumar
- [PATCH 07/16] drm/msm/dpu: add cdm blocks to RM,
Abhinav Kumar
- [PATCH 14/16] drm/msm/dpu: do not allow YUV formats if no CDM block is present,
Abhinav Kumar
- [PATCH 09/16] drm/msm/dpu: add CDM related logic to dpu_hw_ctl layer,
Abhinav Kumar
- [PATCH 12/16] drm/msm/dpu: plug-in the cdm related bits to writeback setup,
Abhinav Kumar
- [PATCH 13/16] drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output,
Abhinav Kumar
- [PATCH 06/16] drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block,
Abhinav Kumar
- [PATCH 10/16] drm/msm/dpu: add support to disable CDM block during encoder cleanup,
Abhinav Kumar
- [PATCH 03/16] drm/msm/dpu: rename dpu_encoder_phys_wb_setup_cdp to match its functionality,
Abhinav Kumar
- [PATCH 02/16] drm/msm/dpu: add formats check for writeback encoder,
Abhinav Kumar
- [PATCH 04/16] drm/msm/dpu: add cdm blocks to sc7280 dpu_hw_catalog,
Abhinav Kumar
- [PATCH 05/16] drm/msm/dpu: add cdm blocks to sm8250 dpu_hw_catalog, Abhinav Kumar
- [PATCH 08/16] drm/msm/dpu: add support to allocate CDM from RM,
Abhinav Kumar
- [PATCH 01/16] drm/msm/dpu: fix writeback programming for YUV cases,
Abhinav Kumar
- [PATCH 0/2] FEMTOPHY REFGEN regulator,
Konrad Dybcio
- [PATCH V2 0/4] Enable IPQ5018 USB2 support,
Nitheesh Sekar
- [PATCH] clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks,
Varadarajan Narayanan
- [PATCH v4 0/7] Add support for LUT PPG,
Anjelique Melendez
- [PATCH v8 0/6] soc: qcom: llcc: Add support for QDU1000/QRU1000,
Komal Bajaj
- [PATCH 00/11] Initial support for the Fairphone 5 smartphone,
Luca Weiss
- [PATCH 08/11] soc: qcom: socinfo: Add SoC ID for QCM6490, Luca Weiss
- [PATCH 02/11] nvmem: qfprom: Mark core clk as optional, Luca Weiss
- [PATCH 10/11] dt-bindings: arm: qcom: Add QCM6490 Fairphone 5, Luca Weiss
- [PATCH 01/11] arm64: dts: qcom: sc7280: Mark some nodes as 'reserved', Luca Weiss
- [PATCH 11/11] arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5, Luca Weiss
- [PATCH 03/11] arm64: dts: qcom: sc7280: Move qfprom clock to chrome-common, Luca Weiss
- [PATCH 04/11] arm64: dts: qcom: pm7250b: make SID configurable, Luca Weiss
- [PATCH 07/11] dt-bindings: arm: qcom,ids: Add SoC ID for QCM6490, Luca Weiss
- [PATCH 06/11] dt-bindings: pinctrl: qcom,sc7280: Allow gpio-reserved-ranges, Luca Weiss
- [PATCH 05/11] arm64: dts: qcom: pm8350c: Add flash led node, Luca Weiss
- [PATCH 09/11] cpufreq: Add QCM6490 to cpufreq-dt-platdev blocklist, Luca Weiss
- Re: (subset) [PATCH 00/11] Initial support for the Fairphone 5 smartphone, Bjorn Andersson
- [PATCH v3 00/10] media: qcom: camss: Bugfix series,
Bryan O'Donoghue
- [PATCH v3 05/10] media: qcom: camss: Fix VFE-17x vfe_disable_output(), Bryan O'Donoghue
- [PATCH v3 01/10] media: qcom: camss: Fix pm_domain_on sequence in probe, Bryan O'Donoghue
- [PATCH v3 03/10] media: qcom: camss: Fix genpd cleanup, Bryan O'Donoghue
- [PATCH v3 07/10] media: qcom: camss: Fix missing vfe_lite clocks check, Bryan O'Donoghue
- [PATCH v3 04/10] media: qcom: camss: Fix vfe_get() error jump, Bryan O'Donoghue
- [PATCH v3 06/10] media: qcom: camss: Fix VFE-480 vfe_disable_output(), Bryan O'Donoghue
- [PATCH v3 08/10] media: qcom: camss: Fix invalid clock enable bit disjunction, Bryan O'Donoghue
- [PATCH v3 02/10] media: qcom: camss: Fix V4L2 async notifier error path, Bryan O'Donoghue
- [PATCH v3 10/10] media: qcom: camss: Fix csid-gen2 for test pattern generator, Bryan O'Donoghue
- [PATCH v3 09/10] media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3, Bryan O'Donoghue
- Re: [PATCH v3 00/10] media: qcom: camss: Bugfix series, Laurent Pinchart
- Re: [PATCH v3 00/10] media: qcom: camss: Bugfix series, Bryan O'Donoghue
- [PATCH] dt-bindings: usb: dwc3: Add IPQ5018 compatible,
Nitheesh Sekar
- [PATCH 0/7] 8550 dma coherent and more,
Konrad Dybcio
- [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups,
Elliot Berman
- [PATCH v4] usb: typec: qcom: Update the logic of regulator enable and disable,
Hui Liu via B4 Relay
- [PATCH] soc: qcom: socinfo: Add SM8550-adjacent PMICs,
Konrad Dybcio
- [PATCH 0/4] EUSB2 repeater init sequence override,
Konrad Dybcio
- [PATCH v5 00/32] Introduce QC USB SND audio offloading support,
Wesley Cheng
- [PATCH v5 25/32] ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API, Wesley Cheng
- [PATCH v5 23/32] ASoC: dt-bindings: Add Q6USB backend, Wesley Cheng
- [PATCH v5 05/32] usb: host: xhci-mem: Allow for interrupter clients to choose specific index, Wesley Cheng
- [PATCH v5 11/32] sound: usb: card: Introduce USB SND platform op callbacks, Wesley Cheng
- [PATCH v5 07/32] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port, Wesley Cheng
- [PATCH v5 09/32] ASoC: qdsp6: q6afe: Increase APR timeout, Wesley Cheng
- [PATCH v5 14/32] dt-bindings: usb: xhci: Add num-hc-interrupters definition, Wesley Cheng
- [PATCH v5 08/32] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp, Wesley Cheng
- [PATCH v5 04/32] usb: host: xhci-mem: Cleanup pending secondary event ring events, Wesley Cheng
- [PATCH v5 02/32] xhci: add helper to stop endpoint and wait for completion, Wesley Cheng
- [PATCH v5 06/32] ASoC: Add SOC USB APIs for adding an USB backend, Wesley Cheng
- [PATCH v5 10/32] ASoC: qcom: Add USB backend ASoC driver for Q6, Wesley Cheng
- [PATCH v5 19/32] sound: usb: card: Check for support for requested audio format, Wesley Cheng
- [PATCH v5 20/32] sound: soc: soc-usb: Add PCM format check API for USB backend, Wesley Cheng
- [PATCH v5 28/32] sound: soc: qdsp6: Add SND kcontrol for fetching offload status, Wesley Cheng
- [PATCH v5 22/32] sound: usb: Prevent starting of audio stream if in use, Wesley Cheng
- [PATCH v5 26/32] sound: Pass USB SND card and PCM information to SOC USB, Wesley Cheng
- [PATCH v5 30/32] sound: usb: qc_audio_offload: Use card and PCM index from QMI request, Wesley Cheng
- [PATCH v5 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition, Wesley Cheng
- [PATCH v5 32/32] sound: soc: soc-usb: Rediscover USB SND devices on USB port add, Wesley Cheng
- [PATCH v5 31/32] sound: usb: card: Allow for rediscovery of connected USB SND devices, Wesley Cheng
- [PATCH v5 27/32] sound: soc: qdsp6: Add SND kcontrol to select offload device, Wesley Cheng
- [PATCH v5 21/32] sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device, Wesley Cheng
- [PATCH v5 15/32] usb: dwc3: Add DT parameter to specify maximum number of interrupters, Wesley Cheng
- [PATCH v5 12/32] sound: usb: Export USB SND APIs for modules, Wesley Cheng
- [PATCH v5 18/32] sound: usb: Introduce QC USB SND offloading support, Wesley Cheng
- [PATCH v5 17/32] sound: usb: qcom: Add USB QMI definitions, Wesley Cheng
- [PATCH v5 24/32] ASoC: dt-bindings: Update example for enabling USB offload on SM8250, Wesley Cheng
- [PATCH v5 29/32] sound: soc: qcom: q6usb: Add headphone jack for offload connection status, Wesley Cheng
- [PATCH v5 16/32] usb: host: xhci-plat: Set XHCI max interrupters if property is present, Wesley Cheng
- [PATCH v5 01/32] xhci: add support to allocate several interrupters, Wesley Cheng
- [PATCH v5 03/32] xhci: sideband: add initial api to register a sideband entity, Wesley Cheng
- [PATCH 0/2] 8550 USB QMPPHY fixups,
Konrad Dybcio
- [PATCH] clk: qcom: Fix SM_GPUCC_8450 dependencies,
Nathan Chancellor
- [PATCH 0/9] Enable USB3 for IPQ5332,
Praveenkumar I
- [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY, Praveenkumar I
- [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver, Praveenkumar I
- [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY, Praveenkumar I
- [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver, Praveenkumar I
- [PATCH 5/9] dt-bindings: usb: dwc3: Update IPQ5332 compatible, Praveenkumar I
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY, Praveenkumar I
- [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes, Praveenkumar I
- [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support, Praveenkumar I
- [PATCH 9/9] arm64: defconfig: Enable UNIPHY driver, Praveenkumar I
- Re: [PATCH 0/9] Enable USB3 for IPQ5332, Krzysztof Kozlowski
[PATCH 0/3] Add APSS clock driver support for IPQ5018,
Gokul Sriram Palanisamy
[PATCH v3 0/2] irqchip/qcom-pdc: support v3.2 HW,
Dmitry Baryshkov
[PATCH v10 0/4] Enable IPQ5332 USB2,
Varadarajan Narayanan
[PATCH RFC v6 00/10] Support for Solid Fill Planes,
Jessica Zhang
- [PATCH RFC v6 07/10] drm/atomic: Loosen FB atomic checks, Jessica Zhang
- [PATCH RFC v6 03/10] drm: Add solid fill pixel source, Jessica Zhang
- [PATCH RFC v6 04/10] drm/atomic: Add pixel source to plane state dump, Jessica Zhang
- [PATCH RFC v6 02/10] drm: Introduce solid fill DRM plane property, Jessica Zhang
- [PATCH RFC v6 01/10] drm: Introduce pixel_source DRM plane property, Jessica Zhang
- [PATCH RFC v6 08/10] drm/msm/dpu: Allow NULL FBs in atomic commit, Jessica Zhang
- [PATCH RFC v6 05/10] drm/atomic: Add solid fill data to plane state dump, Jessica Zhang
- [PATCH RFC v6 06/10] drm/atomic: Move framebuffer checks to helper, Jessica Zhang
- [PATCH RFC v6 10/10] drm/msm/dpu: Add solid fill and pixel source properties, Jessica Zhang
- [PATCH RFC v6 09/10] drm/msm/dpu: Use DRM solid_fill property, Jessica Zhang
- Re: [PATCH RFC v6 00/10] Support for Solid Fill Planes, Sebastian Wick
- Re: [PATCH RFC v6 00/10] Support for Solid Fill Planes, Harry Wentland
[PATCH 00/11] arm64: qcom: add and enable SHM Bridge support,
Bartosz Golaszewski
- [PATCH 05/11] dt-bindings: document the Qualcomm TEE Shared Memory Bridge, Bartosz Golaszewski
- [PATCH 07/11] firmware: qcom-scm: use SHM bridge if available, Bartosz Golaszewski
- [PATCH 09/11] arm64: dts: qcom: sm8450: enable SHM bridge, Bartosz Golaszewski
- [PATCH 10/11] arm64: dts: qcom: sa8775p: enable SHM bridge, Bartosz Golaszewski
- [PATCH 01/11] firmware: qcom-scm: drop unneeded 'extern' specifiers, Bartosz Golaszewski
- [PATCH 02/11] firmware: qcom-scm: order includes alphabetically, Bartosz Golaszewski
- [PATCH 11/11] arm64: dts: qcom: sm8150: enable SHM bridge, Bartosz Golaszewski
- [PATCH 06/11] firmware: qcom-shm-bridge: new driver, Bartosz Golaszewski
- [PATCH 08/11] arm64: defconfig: enable Qualcomm SHM bridge module, Bartosz Golaszewski
- [PATCH 03/11] firmware: qcom-scm: atomically assign and read the global __scm pointer, Bartosz Golaszewski
- [PATCH 04/11] firmware: qcom-scm: add support for SHM bridge operations, Bartosz Golaszewski
- Re: [PATCH 00/11] arm64: qcom: add and enable SHM Bridge support, Dmitry Baryshkov
- Re: (subset) [PATCH 00/11] arm64: qcom: add and enable SHM Bridge support, Bjorn Andersson
[PATCH 0/7] Add support for IPQ5018 tsens,
Sricharan Ramabadhran
[PATCH] freezer,sched: Use saved_state to reduce some spurious wakeups,
Elliot Berman
[PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB,
Adrien Thierry
ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform,
Dmitry Baryshkov
[PATCH v11 00/13] Add multiport support for DWC3 controllers,
Krishna Kurapati
- [PATCH v11 01/13] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport, Krishna Kurapati
- [PATCH v11 04/13] usb: dwc3: core: Access XHCI address space temporarily to read port info, Krishna Kurapati
- [PATCH v11 02/13] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller, Krishna Kurapati
- [PATCH v11 05/13] usb: dwc3: core: Skip setting event buffers for host only controllers, Krishna Kurapati
- [PATCH v11 03/13] usb: xhci: Move extcaps related macros to respective header file, Krishna Kurapati
- [PATCH v11 06/13] usb: dwc3: core: Refactor PHY logic to support Multiport Controller, Krishna Kurapati
- [PATCH v11 10/13] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper, Krishna Kurapati
- [PATCH v11 09/13] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport, Krishna Kurapati
- [PATCH v11 08/13] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver, Krishna Kurapati
- [PATCH v11 07/13] usb: dwc3: qcom: Add helper function to request threaded IRQ, Krishna Kurapati
- [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller, Krishna Kurapati
- [PATCH v11 12/13] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports, Krishna Kurapati
- [PATCH v11 11/13] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280, Krishna Kurapati
[PATCH v14 0/9] Add support for Core Power Reduction v3, v4 and Hardened,
Konrad Dybcio
- [PATCH v14 2/9] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment, Konrad Dybcio
- [PATCH v14 3/9] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver, Konrad Dybcio
- [PATCH v14 6/9] soc: qcom: cpr: Use u64 for frequency, Konrad Dybcio
- [PATCH v14 8/9] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened, Konrad Dybcio
- [PATCH v14 5/9] soc: qcom: cpr-common: Add support for flat fuse adjustment, Konrad Dybcio
- [PATCH v14 4/9] soc: qcom: cpr: Move common functions to new file, Konrad Dybcio
- [PATCH v14 9/9] arm64: dts: qcom: msm8998: Configure CPRh, Konrad Dybcio
- [PATCH v14 1/9] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver, Konrad Dybcio
- [PATCH v14 7/9] soc: qcom: cpr-common: Add threads support, Konrad Dybcio
- Re: [PATCH v14 0/9] Add support for Core Power Reduction v3, v4 and Hardened, Varadarajan Narayanan
[PATCH v3 0/6] arm64: qcom: sm8550: enable RNG,
Neil Armstrong
[Index of Archives]
[Linux ARM Kernel]
[Linux Omap]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Share Photos]
[Fedora ARM]
[Hot Springs Forum]
