While convering the binding to new format, serdes address specified in the
old binding was used as the base address. This causes a boot hang as the
driver tries to access memory region outside of the specified address. Fix
it!
Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # 6.6
Fixes: bb56cff4ac03 ("ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 2aa5089a8513..a88f186fcf03 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -436,9 +436,9 @@ pcie_ep: pcie-ep@1c00000 {
status = "disabled";
};
- pcie_phy: phy@1c07000 {
+ pcie_phy: phy@1c06000 {
compatible = "qcom,sdx55-qmp-pcie-phy";
- reg = <0x01c07000 0x2000>;
+ reg = <0x01c06000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
--
2.25.1
