On 12/11/23 14:28, Kathiravan Thirumoorthy wrote:
On 12/11/2023 4:02 PM, Konrad Dybcio wrote:
On 11.12.2023 04:37, Kathiravan Thirumoorthy wrote:
Describe the NSS clock controller node and it's relevant external
clocks.
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 42e2e48b2bc3..a1504f6c40c1 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -15,6 +15,18 @@ / {
#size-cells = <2>;
clocks {
+ cmn_pll_nss_200m_clk: cmn-pll-nss-200m-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ #clock-cells = <0>;
+ };
+
+ cmn_pll_nss_300m_clk: cmn-pll-nss-300m-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <300000000>;
+ #clock-cells = <0>;
+ };
+
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -473,6 +485,22 @@ frame@b128000 {
status = "disabled";
};
};
+
+ nsscc: clock-controller@39b00000{
Missing space between the opening curly brace
My bad :( will fix it in next spin.
+ compatible = "qcom,ipq5332-nsscc";
+ reg = <0x39b00000 0x80000>;
the regmap_config in the clk driver has .max_register = 0x800, is this
correct?
As per the memory map, 512KB is the size of this block. However the last register in that region is at the offset 0x800. Shall I update the max_register also to 512KB to keep it consistency?
No, it's fine, I just wanted to know if it's intentional :)
Thanks!
Konrad
