The X1E80100 platform bumps the HW version of QMP phy to v7 for USB, and PCIe. Add the new PCS offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h | 32 ++++++++++++++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 34 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h new file mode 100644 index 000000000000..c7759892ed2e --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_V7_H_ +#define QCOM_PHY_QMP_PCS_V7_H_ + +/* Only for QMP V7 PHY - USB/PCIe PCS registers */ +#define QPHY_V7_PCS_SW_RESET 0x000 +#define QPHY_V7_PCS_PCS_STATUS1 0x014 +#define QPHY_V7_PCS_POWER_DOWN_CONTROL 0x040 +#define QPHY_V7_PCS_START_CONTROL 0x044 +#define QPHY_V7_PCS_POWER_STATE_CONFIG1 0x090 +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG1 0x0c4 +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG2 0x0c8 +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG3 0x0cc +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG6 0x0d8 +#define QPHY_V7_PCS_REFGEN_REQ_CONFIG1 0x0dc +#define QPHY_V7_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 +#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 +#define QPHY_V7_PCS_RATE_SLEW_CNTRL1 0x198 +#define QPHY_V7_PCS_CDR_RESET_TIME 0x1b0 +#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG1 0x1c0 +#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG2 0x1c4 +#define QPHY_V7_PCS_PCS_TX_RX_CONFIG 0x1d0 +#define QPHY_V7_PCS_EQ_CONFIG1 0x1dc +#define QPHY_V7_PCS_EQ_CONFIG2 0x1e0 +#define QPHY_V7_PCS_EQ_CONFIG5 0x1ec + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 71f063f4a56e..21f6a56e7ae3 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -44,6 +44,8 @@ #include "phy-qcom-qmp-pcs-v6_20.h" +#include "phy-qcom-qmp-pcs-v7.h" + /* Only for QMP V3 & V4 PHY - DP COM registers */ #define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00 #define QPHY_V3_DP_COM_SW_RESET 0x04 -- 2.34.1
