Re: [PATCH v2 7/7] arm64: dts: qcom: aim300: add AIM300 AIoT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/12/2023 10:28, Tengfei Fan wrote:
> Add AIM300 AIoT board DTS support, including usb, serial, PCIe, and sound
> card functions support.
> 
> Co-developed-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
> Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
> Co-developed-by: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/qcs8550-aim300-aiot.dts     | 579 ++++++++++++++++++
>  2 files changed, 580 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 51335f08a742..779a4305a8b5 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -92,6 +92,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
> new file mode 100644
> index 000000000000..099f28b86559
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
> @@ -0,0 +1,579 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/leds/common.h>
> +#include "qcs8550-aim300.dtsi"

Which includes sm8550.dtsi thus I think this is compatible with sm8550.
You even use sm8550 compatibles here, which is one more hint for that
compatibility.

We followed this convention for RB5, although not for QRU/QDU1000 boards.

Anyway, if you add here new SoC compatible, I would expect to see new
SoC DTSI.

I don't have in my notes any previous consensus or decision in these
matters, so let's discuss now.
+CC few Linaro folks

> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
> +	compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550";
> +
> +	aliases {
> +		serial0 = &uart7;
> +	};



Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux