On 12/12/2023 1:40 AM, Dmitry Baryshkov wrote:
On Tue, 12 Dec 2023 at 02:23, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
CDM block comes with its own set of registers and operations
which can be done. In-line with other hardware blocks, this
change adds the dpu_hw_cdm abstraction for the CDM block.
changes in v3:
- fix commit text from sub-blk to blk for CDM
- fix kbot issue for missing static for dpu_hw_cdm_enable()
- fix kbot issue for incorrect documentation style
- add more documentation for enums and struct in dpu_hw_cdm.h
- drop "enable" parameter from bind_pingpong_blk() as we can
just use PINGPONG_NONE for disable cases
- drop unnecessary bit operation for zero value of cdm_cfg
changes in v2:
- replace bit magic with relevant defines
- use drmm_kzalloc instead of kzalloc/free
- some formatting fixes
- inline _setup_cdm_ops()
- protect bind_pingpong_blk with core_rev check
- drop setup_csc_data() and setup_cdwn() ops as they
are merged into enable()
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Closes: https://lore.kernel.org/oe-kbuild-all/202312101815.B3ZH7Pfy-lkp@xxxxxxxxx/
Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
---
drivers/gpu/drm/msm/Makefile | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c | 263 ++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h | 130 ++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 1 +
4 files changed, 395 insertions(+)
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 49671364fdcf..b1173128b5b9 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -63,6 +63,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
disp/dpu1/dpu_encoder_phys_wb.o \
disp/dpu1/dpu_formats.o \
disp/dpu1/dpu_hw_catalog.o \
+ disp/dpu1/dpu_hw_cdm.o \
disp/dpu1/dpu_hw_ctl.o \
disp/dpu1/dpu_hw_dsc.o \
disp/dpu1/dpu_hw_dsc_1_2.o \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
new file mode 100644
index 000000000000..4976f8a05ce7
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, The Linux Foundation. All rights reserved.
+ */
+
+#include <drm/drm_managed.h>
+
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_util.h"
+#include "dpu_hw_catalog.h"
+#include "dpu_hw_cdm.h"
+#include "dpu_kms.h"
+
+#define CDM_CSC_10_OPMODE 0x000
+#define CDM_CSC_10_BASE 0x004
+
+#define CDM_CDWN2_OP_MODE 0x100
+#define CDM_CDWN2_CLAMP_OUT 0x104
+#define CDM_CDWN2_PARAMS_3D_0 0x108
+#define CDM_CDWN2_PARAMS_3D_1 0x10C
+#define CDM_CDWN2_COEFF_COSITE_H_0 0x110
+#define CDM_CDWN2_COEFF_COSITE_H_1 0x114
+#define CDM_CDWN2_COEFF_COSITE_H_2 0x118
+#define CDM_CDWN2_COEFF_OFFSITE_H_0 0x11C
+#define CDM_CDWN2_COEFF_OFFSITE_H_1 0x120
+#define CDM_CDWN2_COEFF_OFFSITE_H_2 0x124
+#define CDM_CDWN2_COEFF_COSITE_V 0x128
+#define CDM_CDWN2_COEFF_OFFSITE_V 0x12C
+#define CDM_CDWN2_OUT_SIZE 0x130
+
+#define CDM_HDMI_PACK_OP_MODE 0x200
+#define CDM_CSC_10_MATRIX_COEFF_0 0x004
+
+#define CDM_MUX 0x224
+
+/* CDM CDWN2 sub-block bit definitions */
+#define CDM_CDWN2_OP_MODE_EN BIT(0)
+#define CDM_CDWN2_OP_MODE_ENABLE_H BIT(1)
+#define CDM_CDWN2_OP_MODE_ENABLE_V BIT(2)
+#define CDM_CDWN2_OP_MODE_METHOD_H_AVG BIT(3)
+#define CDM_CDWN2_OP_MODE_METHOD_H_COSITE BIT(4)
+#define CDM_CDWN2_OP_MODE_METHOD_V_AVG BIT(5)
+#define CDM_CDWN2_OP_MODE_METHOD_V_COSITE BIT(6)
+#define CDM_CDWN2_OP_MODE_BITS_OUT_8BIT BIT(7)
+#define CDM_CDWN2_OP_MODE_METHOD_H_OFFSITE GENMASK(4, 3)
+#define CDM_CDWN2_OP_MODE_METHOD_V_OFFSITE GENMASK(6, 5)
I think it might be easier to define
enum {
CDM_CDWN2_METHOD_DROP_PIXEL = 0,
CDM_CDWN2_METHOD_AVG = 1,
CDM_CDWN2_METHOD_ = 2,
CDM_CDWN2_METHOD_DROP_PIXEL = 3,
};
then use FIELD_PREP()
Ok, let me explore that option.
We already have below enum in dpu_hw_cdm.h, we can re-use that
+enum dpu_hw_cdwn_type {
+ CDM_CDWN_DISABLE,
+ CDM_CDWN_PIXEL_DROP,
+ CDM_CDWN_AVG,
+ CDM_CDWN_COSITE,
+ CDM_CDWN_OFFSITE,
+};
+#define CDM_CDWN2_V_PIXEL_DROP_MASK GENMASK(6, 5)
+#define CDM_CDWN2_H_PIXEL_DROP_MASK GENMASK(4, 3)
Why are they called foo_DROP_bar?
Because they are always used with ~
And as per the documentation 0 for this field is pixel drop.
If we are dropping the clearing altogether, then these masks will go
away too.
+
+/* CDM CSC10 sub-block bit definitions */
+#define CDM_CSC10_OP_MODE_EN BIT(0)
+#define CDM_CSC10_OP_MODE_SRC_FMT_YUV BIT(1)
+#define CDM_CSC10_OP_MODE_DST_FMT_YUV BIT(2)
+
+/* CDM HDMI pack sub-block bit definitions */
+#define CDM_HDMI_PACK_OP_MODE_EN BIT(0)
+
+/*
+ * Horizontal coefficients for cosite chroma downscale
+ * s13 representation of coefficients
+ */
+static u32 cosite_h_coeff[] = {0x00000016, 0x000001cc, 0x0100009e};
+
+/*
+ * Horizontal coefficients for offsite chroma downscale
+ */
+static u32 offsite_h_coeff[] = {0x000b0005, 0x01db01eb, 0x00e40046};
+
+/*
+ * Vertical coefficients for cosite chroma downscale
+ */
+static u32 cosite_v_coeff[] = {0x00080004};
+/*
+ * Vertical coefficients for offsite chroma downscale
+ */
+static u32 offsite_v_coeff[] = {0x00060002};
+
+static int dpu_hw_cdm_setup_cdwn(struct dpu_hw_cdm *ctx, struct dpu_hw_cdm_cfg *cfg)
+{
+ struct dpu_hw_blk_reg_map *c = &ctx->hw;
+ u32 opmode = 0;
+ u32 out_size = 0;
No need to init it, please drop.
alright.
+
+ if (cfg->output_bit_depth != CDM_CDWN_OUTPUT_10BIT)
+ opmode |= CDM_CDWN2_OP_MODE_BITS_OUT_8BIT;
+
+ /* ENABLE DWNS_H bit */
+ opmode |= CDM_CDWN2_OP_MODE_ENABLE_H;
+
+ switch (cfg->h_cdwn_type) {
+ case CDM_CDWN_DISABLE:
+ /* CLEAR METHOD_H field */
+ opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
+ /* CLEAR DWNS_H bit */
+ opmode &= ~CDM_CDWN2_OP_MODE_ENABLE_H;
Please, can we get rid of clears for the zero-initialised variable? If
you move the 10bit/8bit check after this switch, you can drop the = 0
from the variable definition and instead have:
Ok, will refine further.
switch (type) {
case DISABLE:
opmode = 0;
break;
case PIXEL_DROP:
opmode = CDM_CDWN2_OP_MODE_ENABLE_H |
FIELD_PREP(CDM_CDWM2_OP_MODE_METHOD_H,
CDM_CDWN2_METHOD_DROP_PIXEL);
break;
case AVG:
opmode = CDM_CDWN2_OP_MODE_ENABLE_H |
FIELD_PREP(CDM_CDWM2_OP_MODE_METHOD_H,
CDM_CDWN2_METHOD_AVG);
break;
// etc.
}
Same for the v_type.
Also could you please drop useless comments which repeat what is being
done in the next line?
ack :)
+ break;
+ case CDM_CDWN_PIXEL_DROP:
+ /* Clear METHOD_H field (pixel drop is 0) */
+ opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
+ break;
+ case CDM_CDWN_AVG:
+ /* Clear METHOD_H field (Average is 0x1) */
+ opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
+ opmode |= CDM_CDWN2_OP_MODE_METHOD_H_AVG;
+ break;
+ case CDM_CDWN_COSITE:
+ /* Clear METHOD_H field (Average is 0x2) */
So, is Average 0x1 or 0x2? Or 0x3 as written below?
The comment is wrong. It should say Co-Site is 0x2, Off-Site is 0x3.
And for the record, average is 0x1 :)
+ opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
+ opmode |= CDM_CDWN2_OP_MODE_METHOD_H_COSITE;
+ /* Co-site horizontal coefficients */
+ DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_0,
+ cosite_h_coeff[0]);
+ DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_1,
+ cosite_h_coeff[1]);
+ DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_2,
+ cosite_h_coeff[2]);
+ break;
+ case CDM_CDWN_OFFSITE:
+ /* Clear METHOD_H field (Average is 0x3) */
+ opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
+ opmode |= CDM_CDWN2_OP_MODE_METHOD_H_OFFSITE;
+
+ /* Off-site horizontal coefficients */
+ DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_0,
+ offsite_h_coeff[0]);
+ DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_1,
+ offsite_h_coeff[1]);
+ DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_2,
+ offsite_h_coeff[2]);
+ break;
+ default:
+ DPU_ERROR("%s invalid horz down sampling type\n", __func__);
+ return -EINVAL;
+ }
+
+ /* ENABLE DWNS_V bit */
+ opmode |= CDM_CDWN2_OP_MODE_ENABLE_V;
+
+ switch (cfg->v_cdwn_type) {
+ case CDM_CDWN_DISABLE:
+ /* CLEAR METHOD_V field */
+ opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
+ /* CLEAR DWNS_V bit */
+ opmode &= ~CDM_CDWN2_OP_MODE_ENABLE_V;
+ break;
+ case CDM_CDWN_PIXEL_DROP:
+ /* Clear METHOD_V field (pixel drop is 0) */
+ opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
+ break;
+ case CDM_CDWN_AVG:
+ /* Clear METHOD_V field (Average is 0x1) */
+ opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
+ opmode |= CDM_CDWN2_OP_MODE_METHOD_V_AVG;
+ break;
+ case CDM_CDWN_COSITE:
+ /* Clear METHOD_V field (Average is 0x2) */
+ opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
+ opmode |= CDM_CDWN2_OP_MODE_METHOD_V_COSITE;
+ /* Co-site vertical coefficients */
+ DPU_REG_WRITE(c,
+ CDM_CDWN2_COEFF_COSITE_V,
+ cosite_v_coeff[0]);
+ break;
+ case CDM_CDWN_OFFSITE:
+ /* Clear METHOD_V field (Average is 0x3) */
+ opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
+ opmode |= CDM_CDWN2_OP_MODE_METHOD_V_OFFSITE;
+
+ /* Off-site vertical coefficients */
+ DPU_REG_WRITE(c,
+ CDM_CDWN2_COEFF_OFFSITE_V,
+ offsite_v_coeff[0]);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cfg->v_cdwn_type || cfg->h_cdwn_type)
+ opmode |= CDM_CDWN2_OP_MODE_EN; /* EN CDWN module */
+ else
+ opmode &= ~CDM_CDWN2_OP_MODE_EN;
+
+ out_size = (cfg->output_width & 0xFFFF) | ((cfg->output_height & 0xFFFF) << 16);
+ DPU_REG_WRITE(c, CDM_CDWN2_OUT_SIZE, out_size);
+ DPU_REG_WRITE(c, CDM_CDWN2_OP_MODE, opmode);
+ DPU_REG_WRITE(c, CDM_CDWN2_CLAMP_OUT, ((0x3FF << 16) | 0x0));
+
+ return 0;
+}
+
+static int dpu_hw_cdm_enable(struct dpu_hw_cdm *ctx, struct dpu_hw_cdm_cfg *cdm)
+{
+ struct dpu_hw_blk_reg_map *c = &ctx->hw;
+ const struct dpu_format *fmt;
+ u32 opmode = 0;
+ u32 csc = 0;
+
+ if (!ctx || !cdm)
+ return -EINVAL;
+
+ fmt = cdm->output_fmt;
+
+ if (!DPU_FORMAT_IS_YUV(fmt))
+ return -EINVAL;
+
+ dpu_hw_csc_setup(&ctx->hw, CDM_CSC_10_MATRIX_COEFF_0, cdm->csc_cfg, true);
+ dpu_hw_cdm_setup_cdwn(ctx, cdm);
+
+ if (cdm->output_type == CDM_CDWN_OUTPUT_HDMI) {
+ if (fmt->chroma_sample != DPU_CHROMA_H1V2)
+ return -EINVAL; /*unsupported format */
+ opmode = CDM_HDMI_PACK_OP_MODE_EN;
+ opmode |= (fmt->chroma_sample << 1);
+ }
+
+ csc |= CDM_CSC10_OP_MODE_DST_FMT_YUV;
+ csc &= ~CDM_CSC10_OP_MODE_SRC_FMT_YUV;
+ csc |= CDM_CSC10_OP_MODE_EN;
+
+ if (ctx && ctx->ops.bind_pingpong_blk)
+ ctx->ops.bind_pingpong_blk(ctx, cdm->pp_id);
+
+ DPU_REG_WRITE(c, CDM_CSC_10_OPMODE, csc);
+ DPU_REG_WRITE(c, CDM_HDMI_PACK_OP_MODE, opmode);
+ return 0;
+}
+
+static void dpu_hw_cdm_bind_pingpong_blk(struct dpu_hw_cdm *ctx, const enum dpu_pingpong pp)
+{
+ struct dpu_hw_blk_reg_map *c;
+ int mux_cfg = 0xF; /* Disabled */
lowercase hex. And it is easier to move it to the if (pp) condition,
like it was done for INTF or WB.
ack for the lowercase hex.
hmm, i followed the dpu_hw_dsc_1_2 model, so basically for 0
(PINGPONG_NONE) cases it will stay at 0xf.
+
+ c = &ctx->hw;
+
+ if (pp)
+ mux_cfg = (pp - PINGPONG_0) & 0x7;
+
+ DPU_REG_WRITE(c, CDM_MUX, mux_cfg);
+}
+
+struct dpu_hw_cdm *dpu_hw_cdm_init(struct drm_device *dev,
+ const struct dpu_cdm_cfg *cfg, void __iomem *addr,
+ const struct dpu_mdss_version *mdss_rev)
+{
+ struct dpu_hw_cdm *c;
+
+ c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
+ if (!c)
+ return ERR_PTR(-ENOMEM);
+
+ c->hw.blk_addr = addr + cfg->base;
+ c->hw.log_mask = DPU_DBG_MASK_CDM;
+
+ /* Assign ops */
+ c->idx = cfg->id;
+ c->caps = cfg;
+
+ c->ops.enable = dpu_hw_cdm_enable;
+ if (mdss_rev->core_major_ver >= 5)
+ c->ops.bind_pingpong_blk = dpu_hw_cdm_bind_pingpong_blk;
+
+ return c;
+}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
new file mode 100644
index 000000000000..e7d57dbd6103
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2023, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DPU_HW_CDM_H
+#define _DPU_HW_CDM_H
+
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_top.h"
+
+struct dpu_hw_cdm;
+
+/**
+ * struct dpu_hw_cdm_cfg : current configuration of CDM block
+ *
+ * @output_width: output ROI width of CDM block
+ * @output_height: output ROI height of CDM block
+ * @output_bit_depth: output bit-depth of CDM block
+ * @h_cdwn_type: downsample type used for horizontal pixels
+ * @v_cdwn_type: downsample type used for vertical pixels
+ * @output_fmt: handle to dpu_format of CDM block
+ * @csc_cfg: handle to CSC matrix programmed for CDM block
+ * @output_type: interface to which CDM is paired (HDMI/WB)
+ * @pp_id: ping-pong block to which CDM is bound to
+ */
+struct dpu_hw_cdm_cfg {
+ u32 output_width;
+ u32 output_height;
+ u32 output_bit_depth;
+ u32 h_cdwn_type;
+ u32 v_cdwn_type;
+ const struct dpu_format *output_fmt;
+ const struct dpu_csc_cfg *csc_cfg;
+ u32 output_type;
+ int pp_id;
+};
+
+/*
+ * These values are used indicate which type of downsample is used
+ * in the horizontal/vertical direction for the CDM block.
+ */
+enum dpu_hw_cdwn_type {
+ CDM_CDWN_DISABLE,
+ CDM_CDWN_PIXEL_DROP,
+ CDM_CDWN_AVG,
+ CDM_CDWN_COSITE,
+ CDM_CDWN_OFFSITE,
+};
+
+/*
+ * CDM block can be paired with WB or HDMI block. These values match
+ * the input with which the CDM block is paired.
+ */
+enum dpu_hw_cdwn_output_type {
+ CDM_CDWN_OUTPUT_HDMI,
+ CDM_CDWN_OUTPUT_WB,
+};
+
+/*
+ * CDM block can give an 8-bit or 10-bit output. These values
+ * are used to indicate the output bit depth of CDM block
+ */
+enum dpu_hw_cdwn_output_bit_depth {
+ CDM_CDWN_OUTPUT_8BIT,
+ CDM_CDWN_OUTPUT_10BIT,
+};
+
+/**
+ * struct dpu_hw_cdm_ops : Interface to the chroma down Hw driver functions
+ * Assumption is these functions will be called after
+ * clocks are enabled
+ * @enable: Enables the output to interface and programs the
+ * output packer
+ * @bind_pingpong_blk: enable/disable the connection with pingpong which
+ * will feed pixels to this cdm
+ */
+struct dpu_hw_cdm_ops {
+ /**
+ * Enable the CDM module
+ * @cdm Pointer to chroma down context
+ */
+ int (*enable)(struct dpu_hw_cdm *cdm, struct dpu_hw_cdm_cfg *cfg);
+
+ /**
+ * Enable/disable the connection with pingpong
+ * @cdm Pointer to chroma down context
+ * @pp pingpong block id.
+ */
+ void (*bind_pingpong_blk)(struct dpu_hw_cdm *cdm, const enum dpu_pingpong pp);
+};
+
+/**
+ * struct dpu_hw_cdm - cdm description
+ * @base: Hardware block base structure
+ * @hw: Block hardware details
+ * @idx: CDM index
+ * @caps: Pointer to cdm_cfg
+ * @ops: handle to operations possible for this CDM
+ */
+struct dpu_hw_cdm {
+ struct dpu_hw_blk base;
+ struct dpu_hw_blk_reg_map hw;
+
+ /* chroma down */
+ const struct dpu_cdm_cfg *caps;
+ enum dpu_cdm idx;
+
+ /* ops */
+ struct dpu_hw_cdm_ops ops;
+};
+
+/**
+ * dpu_hw_cdm_init - initializes the cdm hw driver object.
+ * should be called once before accessing every cdm.
+ * @dev: DRM device handle
+ * @cdm: CDM catalog entry for which driver object is required
+ * @addr : mapped register io address of MDSS
+ * @mdss_rev: mdss hw core revision
+ */
+struct dpu_hw_cdm *dpu_hw_cdm_init(struct drm_device *dev,
+ const struct dpu_cdm_cfg *cdm, void __iomem *addr,
+ const struct dpu_mdss_version *mdss_rev);
+
+static inline struct dpu_hw_cdm *to_dpu_hw_cdm(struct dpu_hw_blk *hw)
+{
+ return container_of(hw, struct dpu_hw_cdm, base);
+}
+
+#endif /*_DPU_HW_CDM_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index f319c8232ea5..9db4cf61bd29 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -466,6 +466,7 @@ struct dpu_mdss_color {
#define DPU_DBG_MASK_ROT (1 << 9)
#define DPU_DBG_MASK_DSPP (1 << 10)
#define DPU_DBG_MASK_DSC (1 << 11)
+#define DPU_DBG_MASK_CDM (1 << 12)
/**
* struct dpu_hw_tear_check - Struct contains parameters to configure
--
2.40.1
