The SAW2 device should describe the regulator constraints rather than
just declaring that it has the regulator.
Drop the 'regulator' property. If/when CPU voltage scaling is
implemented for this platform, proper regulator nodes show be added
instead.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 9844e0b7cff9..d7bd97997ff9 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -353,31 +353,26 @@ acc3: power-manager@b0b8000 {
saw0: regulator@b089000 {
compatible = "qcom,saw2";
reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
- regulator;
};
saw1: regulator@b099000 {
compatible = "qcom,saw2";
reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
- regulator;
};
saw2: regulator@b0a9000 {
compatible = "qcom,saw2";
reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
};
saw3: regulator@b0b9000 {
compatible = "qcom,saw2";
reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
};
saw_l2: regulator@b012000 {
compatible = "qcom,saw2";
reg = <0xb012000 0x1000>;
- regulator;
};
blsp1_uart1: serial@78af000 {
--
2.39.2
