On Fri, 8 Dec 2023 at 18:24, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
>
>
> On 12/8/2023 3:12 AM, Dmitry Baryshkov wrote:
> > On Fri, 8 Dec 2023 at 07:07, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
> >>
> >> Since the type and usage of CSC matrices is spanning across DPU
> >> lets introduce a helper to the dpu_hw_util to return the CSC
> >> corresponding to the request type. This will help to add more
> >> supported CSC types such as the RGB to YUV one which is used in
> >> the case of CDM.
> >>
> >> Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> >> ---
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c | 54 +++++++++++++++++++++
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 7 +++
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 39 ++-------------
> >> 3 files changed, 64 insertions(+), 36 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
> >> index 0b05061e3e62..59a153331194 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
> >> @@ -87,6 +87,60 @@ static u32 dpu_hw_util_log_mask = DPU_DBG_MASK_NONE;
> >> #define QOS_QOS_CTRL_VBLANK_EN BIT(16)
> >> #define QOS_QOS_CTRL_CREQ_VBLANK_MASK GENMASK(21, 20)
> >>
> >> +static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
> >> + {
> >> + /* S15.16 format */
> >> + 0x00012A00, 0x00000000, 0x00019880,
> >> + 0x00012A00, 0xFFFF9B80, 0xFFFF3000,
> >> + 0x00012A00, 0x00020480, 0x00000000,
> >> + },
> >> + /* signed bias */
> >> + { 0xfff0, 0xff80, 0xff80,},
> >> + { 0x0, 0x0, 0x0,},
> >> + /* unsigned clamp */
> >> + { 0x10, 0xeb, 0x10, 0xf0, 0x10, 0xf0,},
> >> + { 0x00, 0xff, 0x00, 0xff, 0x00, 0xff,},
> >> +};
> >> +
> >> +static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
> >> + {
> >> + /* S15.16 format */
> >> + 0x00012A00, 0x00000000, 0x00019880,
> >> + 0x00012A00, 0xFFFF9B80, 0xFFFF3000,
> >> + 0x00012A00, 0x00020480, 0x00000000,
> >> + },
> >> + /* signed bias */
> >> + { 0xffc0, 0xfe00, 0xfe00,},
> >> + { 0x0, 0x0, 0x0,},
> >> + /* unsigned clamp */
> >> + { 0x40, 0x3ac, 0x40, 0x3c0, 0x40, 0x3c0,},
> >> + { 0x00, 0x3ff, 0x00, 0x3ff, 0x00, 0x3ff,},
> >> +};
> >> +
> >> +/**
> >> + * dpu_hw_get_csc_cfg - get the CSC matrix based on the request type
> >> + * @type: type of the requested CSC matrix from caller
> >> + * Return: CSC matrix corresponding to the request type in DPU format
> >> + */
> >> +const struct dpu_csc_cfg *dpu_hw_get_csc_cfg(enum dpu_hw_csc_cfg_type type)
> >> +{
> >> + const struct dpu_csc_cfg *csc_cfg = NULL;
> >> +
> >> + switch (type) {
> >> + case DPU_HW_YUV2RGB_601L:
> >> + csc_cfg = &dpu_csc_YUV2RGB_601L;
> >> + break;
> >> + case DPU_HW_YUV2RGB_601L_10BIT:
> >> + csc_cfg = &dpu_csc10_YUV2RGB_601L;
> >> + break;
> >> + default:
> >> + DPU_ERROR("unknown csc_cfg type\n");
> >> + break;
> >> + }
> >> +
> >> + return csc_cfg;
> >> +}
> >> +
> >> void dpu_reg_write(struct dpu_hw_blk_reg_map *c,
> >> u32 reg_off,
> >> u32 val,
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
> >> index fe083b2e5696..49f2bcf6de15 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
> >> @@ -19,6 +19,11 @@
> >> #define MISR_CTRL_STATUS_CLEAR BIT(10)
> >> #define MISR_CTRL_FREE_RUN_MASK BIT(31)
> >>
> >> +enum dpu_hw_csc_cfg_type {
> >> + DPU_HW_YUV2RGB_601L,
> >> + DPU_HW_YUV2RGB_601L_10BIT,
> >> +};
> >> +
> >> /*
> >> * This is the common struct maintained by each sub block
> >> * for mapping the register offsets in this block to the
> >> @@ -368,4 +373,6 @@ bool dpu_hw_clk_force_ctrl(struct dpu_hw_blk_reg_map *c,
> >> const struct dpu_clk_ctrl_reg *clk_ctrl_reg,
> >> bool enable);
> >>
> >> +const struct dpu_csc_cfg *dpu_hw_get_csc_cfg(enum dpu_hw_csc_cfg_type type);
> >
> > I don't think we need extra enum and wrapper. Just export const data
> > structures directly.
> >
>
> I liked this approach because the blocks of DPU such as plane and CDM
> are clients to the dpu_hw_util and just request the type and the util
> handles their request of returning the correct csc matrix.
>
> Do you see any issue with this?
Not an issue, but I don't see anything that requires an extra
abstraction. We perfectly know which CSC config we would like to get.
>
> >> +
> >> #endif /* _DPU_HW_UTIL_H */
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >> index 3235ab132540..31641889b9f0 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >> @@ -21,6 +21,7 @@
> >> #include "dpu_kms.h"
> >> #include "dpu_formats.h"
> >> #include "dpu_hw_sspp.h"
> >> +#include "dpu_hw_util.h"
> >> #include "dpu_trace.h"
> >> #include "dpu_crtc.h"
> >> #include "dpu_vbif.h"
> >> @@ -508,50 +509,16 @@ static void _dpu_plane_setup_pixel_ext(struct dpu_hw_scaler3_cfg *scale_cfg,
> >> }
> >> }
> >>
> >> -static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
> >> - {
> >> - /* S15.16 format */
> >> - 0x00012A00, 0x00000000, 0x00019880,
> >> - 0x00012A00, 0xFFFF9B80, 0xFFFF3000,
> >> - 0x00012A00, 0x00020480, 0x00000000,
> >> - },
> >> - /* signed bias */
> >> - { 0xfff0, 0xff80, 0xff80,},
> >> - { 0x0, 0x0, 0x0,},
> >> - /* unsigned clamp */
> >> - { 0x10, 0xeb, 0x10, 0xf0, 0x10, 0xf0,},
> >> - { 0x00, 0xff, 0x00, 0xff, 0x00, 0xff,},
> >> -};
> >> -
> >> -static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
> >> - {
> >> - /* S15.16 format */
> >> - 0x00012A00, 0x00000000, 0x00019880,
> >> - 0x00012A00, 0xFFFF9B80, 0xFFFF3000,
> >> - 0x00012A00, 0x00020480, 0x00000000,
> >> - },
> >> - /* signed bias */
> >> - { 0xffc0, 0xfe00, 0xfe00,},
> >> - { 0x0, 0x0, 0x0,},
> >> - /* unsigned clamp */
> >> - { 0x40, 0x3ac, 0x40, 0x3c0, 0x40, 0x3c0,},
> >> - { 0x00, 0x3ff, 0x00, 0x3ff, 0x00, 0x3ff,},
> >> -};
> >> -
> >> static const struct dpu_csc_cfg *_dpu_plane_get_csc(struct dpu_sw_pipe *pipe,
> >> const struct dpu_format *fmt)
> >> {
> >> - const struct dpu_csc_cfg *csc_ptr;
> >> -
> >> if (!DPU_FORMAT_IS_YUV(fmt))
> >> return NULL;
> >>
> >> if (BIT(DPU_SSPP_CSC_10BIT) & pipe->sspp->cap->features)
> >> - csc_ptr = &dpu_csc10_YUV2RGB_601L;
> >> + return dpu_hw_get_csc_cfg(DPU_HW_YUV2RGB_601L_10BIT);
> >> else
> >> - csc_ptr = &dpu_csc_YUV2RGB_601L;
> >> -
> >> - return csc_ptr;
> >> + return dpu_hw_get_csc_cfg(DPU_HW_YUV2RGB_601L);
> >> }
> >>
> >> static void _dpu_plane_setup_scaler(struct dpu_sw_pipe *pipe,
> >> --
> >> 2.40.1
> >>
> >
> >
--
With best wishes
Dmitry
