Linux ARM MSM

• Thread Index

• Re: [PATCH 3/3] clk: qcom: Add SM6115 LPASSCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 7/9] soc: qcom: cpr-common: Add threads support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 1/9] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 9/9] arm64: dts: qcom: msm8998: Configure CPRh
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 4/9] soc: qcom: cpr: Move common functions to new file
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 5/9] soc: qcom: cpr-common: Add support for flat fuse adjustment
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 8/9] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 0/9] Add support for Core Power Reduction v3, v4 and Hardened
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 6/9] soc: qcom: cpr: Use u64 for frequency
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 3/9] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 2/9] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 15/23] ARM: dts: qcom: apq8064: add Krait clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] thermal/drivers/qcom/lmh: Fix missing IRQ check in lmh_probe()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 2/6] cpufreq: qcom-nvmem: create L2 cache device
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/6] cpufreq: qcom-nvmem: provide separate configuration data for apq8064
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 16/37] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 14/37] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 15/37] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 17/23] ARM: dts: qcom: apq8064: add simple CPUFreq support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 16/23] ARM: dts: qcom: apq8064: add L2 cache scaling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 15/23] ARM: dts: qcom: apq8064: add Krait clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 08/23] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 07/23] soc: qcom: spm: add support for voltage regulator
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: qcom: sdx65: correct PCIe EP phy-names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v5 13/37] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 37/37] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 36/37] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: qcom: sdx65: add missing GCC clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: qcom: sdx65: correct PCIe EP phy-names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: sdx65: correct SPMI node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 0/6] cpufreq: qcom-nvmem: support apq8064 cpufreq scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: qcom: drop incorrect cell-index from SPMI
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sc8180x: drop incorrect cell-index from SPMI
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 0/6] cpufreq: qcom-nvmem: support apq8064 cpufreq scaling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: "Maulik Shah (mkshah)" <quic_mkshah@xxxxxxxxxxx>
• Re: [PATCH v3 1/1] scripts: Add add-maintainer.py
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V5 6/6] scsi: ufs: qcom: Handle unipro clk HW division based on scaling conditions.
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v3 1/1] scripts: Add add-maintainer.py
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v3] irqchip/qcom-pdc: add support for v3.2 HW
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH v3 6/6] arm64: dts: qcom: sm8450: add TRNG node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH v3 4/6] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 5/6] arm64: dts: qcom: sm8550: add TRNG node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 1/6] Revert "arm64: dts: qcom: sm8450: Add PRNG"
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 3/6] crypto: qcom-rng - Add support for trng
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: crypto: qcom,prng: document that RNG on SM8450 is a TRNG
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 0/6] arm64: qcom: sm8550: enable RNG
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• RE: [PATCH v1] Bluetooth: btusb: add shutdown function for QCA6174
  • From: Rocky Liao <rjliao@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• [RESEND PATCH v6 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [RESEND PATCH v6 1/3] input: pm8xxx-vib: refactor to easily support new SPMI vibrator
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [RESEND PATCH v6 2/3] dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [RESEND PATCH v6 0/3] Add support for vibrator in multiple PMICs
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• Re: [PATCH v2 5/7] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] crypto: qcom-rng - Add support for trng
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] dt-bindings: crypto: qcom,prng: document that RNG on SM8450 is a TRNG
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• [PATCH v6 2/3] firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• [PATCH v6 1/3] lib/ucs2_string: Add UCS-2 strscpy function
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• [PATCH v6 0/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: PCI: qcom: fix SDX65 compatible
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v3 1/1] scripts: Add add-maintainer.py
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v5 33/37] ARM: dts: qcom: msm8974: move regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 30/37] ARM: dts: qcom: mdm9615: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 31/37] ARM: dts: qcom: msm8660: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 29/37] ARM: dts: qcom: apq8064: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 27/37] ARM: dts: qcom: pm8018: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 28/37] ARM: dts: qcom: pm8058: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 24/37] ARM: dts: qcom: pm8921: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 13/37] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 26/37] ARM: dts: qcom: pm8921: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 25/37] ARM: dts: qcom: pm8058: use defined IRQ flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 23/37] ARM: dts: qcom: pm8018: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 22/37] ARM: dts: qcom: pm8921: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 20/37] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 21/37] ARM: dts: qcom: pm8058: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 34/37] ARM: dts: qcom: pm8921: Disable keypad by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 17/37] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 19/37] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 37/37] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 18/37] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 36/37] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 15/37] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 35/37] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 32/37] ARM: dts: qcom: msm8960: drop useless rpm regulators node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 16/37] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 12/37] ARM: dts: qcom: msm8960: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 10/37] ARM: dts: qcom: mdm9615: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 11/37] ARM: dts: qcom: msm8660: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 14/37] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 07/37] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 08/37] ARM: dts: qcom: strip prefix from PMIC files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 05/37] ARM: dts: qcom: msm8660-surf: use keypad label directly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 04/37] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 09/37] ARM: dts: qcom: apq8064: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 02/37] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 06/37] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 03/37] ARM: dts: qcom: apq8064: correct XOADC register address
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 01/37] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 00/37] ARM: dts: qcom: cleanup PMIC usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sc8180x: drop incorrect cell-index from SPMI
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] ARM: dts: qcom: drop incorrect cell-index from SPMI
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 00/11] mailbox/arm64/ qcom: rework compatibles for fallback
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: PCI: qcom: fix SDX65 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] ARM: dts: qcom: sdx65: correct SPMI node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 22/23] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 14/23] ARM: dts: qcom: apq8064: declare SAW2 regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 19/23] ARM: dts: qcom: msm8960: declare SAW2 regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 23/23] ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 18/23] ARM: dts: qcom: apq8064: enable passive CPU cooling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 21/23] ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 20/23] ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 16/23] ARM: dts: qcom: apq8064: add L2 cache scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 17/23] ARM: dts: qcom: apq8064: add simple CPUFreq support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 10/23] ARM: dts: qcom: apq8064-cm-qs600: constraint cpufreq regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 13/23] ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 15/23] ARM: dts: qcom: apq8064: add Krait clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 09/23] ARM: dts: qcom: apq8064-asus-nexus7-flo: constraint cpufreq regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 12/23] ARM: dts: qcom: apq8064-sony-xperia-lagan-yuga: constraint cpufreq regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 11/23] ARM: dts: qcom: apq8064-ifc6410: constraint cpufreq regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 07/23] soc: qcom: spm: add support for voltage regulator
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 08/23] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 05/23] interconnect: icc-clk: add support for scaling using OPP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 06/23] clk: qcom: krait-cc: rewrite driver to use clk_hw instead of clk
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 03/23] dt-bindings: clock: qcom,krait-cc: Krait core clock controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 04/23] dt-bindings: cache: describe L2 cache on Qualcomm Krait platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 02/23] dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 00/23] ARM: qcom: apq8064: support CPU frequency scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 01/23] dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: qcom: sdx65: add missing GCC clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: qcom: sdx65: correct PCIe EP phy-names
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: PCI: qcom: fix SDX65 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device tree
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: arm: qcom: Add BQ Aquaris M5
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v4 0/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial dts
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] scripts: Add add-maintainer.py
  • From: Nicolas Schier <nicolas@xxxxxxxxx>
• [PATCH v4 6/6] cpufreq: qcom-nvmem: enable core voltage scaling for MSM8960
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/6] cpufreq: qcom-nvmem: support apq8064 cpufreq scaling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/6] cpufreq: qcom-nvmem: create L2 cache device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 5/6] cpufreq: qcom-nvmem: provide separate configuration data for apq8064
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/6] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/6] cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 33/38] ARM: dts: qcom: msm8960: drop useless rpm regulators node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 26/38] ARM: dts: qcom: pm8058: use defined IRQ flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 28/38] ARM: dts: qcom: pm8018: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 25/38] ARM: dts: qcom: pm8921: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 27/38] ARM: dts: qcom: pm8921: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 24/38] ARM: dts: qcom: pm8018: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 21/38] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 23/38] ARM: dts: qcom: pm8921: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 20/38] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 22/38] ARM: dts: qcom: pm8058: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 17/38] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 18/38] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 38/38] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 19/38] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 37/38] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 36/38] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 35/38] ARM: dts: qcom: pm8921: Disable keypad by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 15/38] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 16/38] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 34/38] ARM: dts: qcom: msm8974: move regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 11/38] ARM: dts: qcom: mdm9615: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 32/38] ARM: dts: qcom: msm8660: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 30/38] ARM: dts: qcom: apq8064: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 31/38] ARM: dts: qcom: mdm9615: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 13/38] ARM: dts: qcom: msm8960: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 14/38] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 29/38] ARM: dts: qcom: pm8058: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 09/38] ARM: dts: qcom: strip prefix from PMIC files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 10/38] ARM: dts: qcom: apq8064: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 12/38] ARM: dts: qcom: msm8660: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 07/38] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 08/38] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 06/38] ARM: dts: qcom: msm8660-surf: use keypad label directly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 05/38] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 01/38] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 02/38] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 04/38] ARM: dts: qcom: apq8064: correct XOADC register address
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 00/38] ARM: dts: qcom: cleanup PMIC usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: qcom: sdm845-mtp: enable PCIe support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/5] arm64: dts: qcom: sdm845-mtp: enable Vol-/reset button
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/5] arm64: dts: qcom: sdm845-mtp: specify wifi variant
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/5] arm64: dts: qcom: sdm845-mtp: fix WiFi configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/5] arm64: dts: qcom: sdm845-mtp: misc improvements
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/5] arm64: dts: qcom: sdm845-mtp: switch to mbn firmware
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] PCI: epf-mhi: Really use "align" from EPF core
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH] PCI: epf-mhi: Really use "align" from EPF core
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/7] PCI: epf-mhi: Make use of the alignment restriction from EPF core
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
  • From: Zhang Shurong <zhang_shurong@xxxxxxxxxxx>
• Re: [PATCH 3/3] clk: qcom: Add SM6115 LPASSCC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] clk: qcom: Add SM6115 LPASSCC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: sdm845-mtp: switch to mbn firmware
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: sdm845-mtp: switch to mbn firmware
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] wifi: ath10k: Default to board.bin for legacy board data file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 17/32] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/6] media: platform: venus: Add optional LLCC path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/6] media: platform: venus: Add optional LLCC path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 11/15] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 07/15] media: qcom: camss: Capture VFE CSID dependency in a helper function
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 11/15] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 07/15] media: qcom: camss: Capture VFE CSID dependency in a helper function
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 07/15] media: qcom: camss: Capture VFE CSID dependency in a helper function
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 11/15] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916/39-samsung-a2015: Add flash LED
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 17/32] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 11/15] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RESEND v3 2/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device tree
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 10/15] media: qcom: camss: Allow clocks vfeN vfe_liteN or vfe_lite
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 07/15] media: qcom: camss: Capture VFE CSID dependency in a helper function
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: qcom-msm8916-samsung-fortuna: Include dts from arm64
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 09/15] media: qcom: camss: Improve error printout on icc_get fail
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 07/15] media: qcom: camss: Capture VFE CSID dependency in a helper function
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 04/11] arm64: dts: qcom: sdm630: Drop RPM bus clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm630: remove refs to nonexistent clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm630: remove refs to nonexistent clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] thermal/drivers/qcom/lmh: Fix missing IRQ check in lmh_probe()
  • From: Zhang Shurong <zhang_shurong@xxxxxxxxxxx>
• Re: [PATCH v9 7/7] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 3/7] arm64: dts: qcom: pm8150b: Add a TCPM description
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v9 6/7] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
  • From: Zhang Shurong <zhang_shurong@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: msm8916-samsung-gt58: Add display panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: msm8916-samsung-gt510: Add display panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 19/32] ARM: dts: qcom: pm8921: reorder nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 31/32] ARM: dts: qcom: pm8921: Disable keypad by default
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qru1000-idp: add SDHCI for emmc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 32/32] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 15/15] media: qcom: camss: Comment CSID dt_id field
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 14/15] media: qcom: camss: Convert vfe_disable() from int to void
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 11/15] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] irqchip/qcom-pdc: add support for v3.2 HW
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v3 10/15] media: qcom: camss: Allow clocks vfeN vfe_liteN or vfe_lite
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 09/15] media: qcom: camss: Improve error printout on icc_get fail
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 08/15] media: qcom: camss: Untangle if/else spaghetti in camss
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 07/15] media: qcom: camss: Capture VFE CSID dependency in a helper function
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 04/15] media: qcom: camss: Pass remainder of variables as resources
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 01/15] media: qcom: camss: Amalgamate struct resource with struct resource_ispif
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/6] ARM: dts: qcom: add device tree for Nokia Lumia 830
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/6] ARM: dts: qcom: add device tree for Nokia Lumia 735
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/6] ARM: dts: qcom: add common dt for MSM8x26 Lumias along with Nokia Lumia 630
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8150: extend the size of the PDC resource
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: apq8064: add support to gsbi4 uart
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM6115
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM6115
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sc7180: Reorganize trogdor rt5682 audio codec dts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sc7180: Move trogdor rt5682s bits to a fragment
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM6115
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: qrb5165-rb5: enable displayport controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] ASoC: codecs: lpass-tx-macro: Add SM6115 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] clk: qcom: Add SM6115 LPASSCC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm8350-hdk: add pmr735a regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: enable PCIe support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: qcom: sdm845-mtp: enable Vol-/reset button
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: sdm845-mtp: switch to mbn firmware
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Fix SM6375 GPU ID
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 1/1] scripts: Add add-maintainer.py
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• [PATCH v3 0/1] Add add-maintainer.py script
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• Re: [PATCH] wifi: ath10k: Default to board.bin for legacy board data file
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Fix SM6375 GPU ID
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v4 4/4] drm/msm/dsi: Enable widebus for DSI
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] drm/msm/dpu: Enable widebus for DSI INTF
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: Add newlines to debug printks
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: Add newlines to debug printks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dp: Add newlines to debug printks
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 2/7] PCI: epf-mhi: Make use of the alignment restriction from EPF core
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v7 07/24] iommu/mtk_iommu_v1: Implement an IDENTITY domain
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• Re: [PATCH v1] drm/msm/dp: do not reinitialize phy unless retry during link training
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v7 05/24] iommu/fsl_pamu: Implement a PLATFORM domain
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: sdm845-mtp: enable PCIe support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: sdm845-mtp: switch to mbn firmware
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/5] arm64: dts: qcom: sdm845-mtp: fix WiFi configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/5] arm64: dts: qcom: sdm845-mtp: specify wifi variant
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: sdm845-mtp: enable Vol-/reset button
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFT] arm64: dts: qcom: sc7280: Add missing LMH interrupts
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 06/24] iommu/tegra-gart: Remove tegra-gart
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sm8350: fix pinctrl for UART18
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sm8350-hdk: add missing PMICs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sm8350: fix pinctrl for UART18
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sm8350-hdk: add missing PMICs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm8350-hdk: add pmr735a regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 2/4] firmware: qcom_scm: disable SDI if required
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8150: extend the size of the PDC resource
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 04/24] iommu: Add IOMMU_DOMAIN_PLATFORM for S390
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• [PATCH] drm/msm/adreno: Fix SM6375 GPU ID
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH RFT] arm64: dts: qcom: sc7280: Add missing LMH interrupts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 1/7] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v1] drm/msm/dp: do not reinitialize phy unless retry during link training
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] wifi: ath10k: Default to board.bin for legacy board data file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 03/24] powerpc/iommu: Setup a default domain and remove set_platform_dma_ops
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• Re: [PATCH v7 02/24] iommu: Add IOMMU_DOMAIN_PLATFORM
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• Re: [PATCH RFT] arm64: dts: qcom: sc7280: Add missing LMH interrupts
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/4] arm64: qcom: sa8775p: add support for PCIe
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v3] irqchip/qcom-pdc: add support for v3.2 HW
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 11/33] iris: vidc: add helpers for memory management
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sdm845: cheza doesn't support LMh node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sdm845: Fix PSCI power domain names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 0/7] Improvements to Qcom PCIe EP and EPF MHI drivers
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v12 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
• Re: [PATCH v12 4/6] iommu/s390: Disable deferred flush for ISM devices
  • From: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
• [PATCH 2/3] clk: qcom: reset: Increase max reset delay
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] clk: qcom: Add SM6115 LPASSCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/3] SM6115 LPASSCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/7] Improvements to Qcom PCIe EP and EPF MHI drivers
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH v7 02/24] iommu: Add IOMMU_DOMAIN_PLATFORM
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 0/2] SM6115 TX Macro
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] ASoC: codecs: lpass-tx-macro: Add SM6115 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/2] ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM6115
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RFC DNM] perf: Add support for Qualcomm Last-Level Cache Controller PMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RFC DNM] perf: Add support for Qualcomm Last-Level Cache Controller PMU
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] scripts: Add add-maintainer.py
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• Re: [PATCH] PCI: qcom-ep: Treat unknown irq events as an error
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH v4 08/10] interconnect: qcom: sdm660: Set AB/IB coefficients
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 07/10] interconnect: qcom: qcm2290: Update EBI channel configuration
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 03/10] interconnect: qcom: icc-rpm: Let nodes drive their own bus clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 02/10] interconnect: qcom: icc-rpm: Separate out clock rate calulcations
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 01/10] interconnect: qcom: icc-rpm: Add AB/IB calculations coefficients
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 10/10] clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 06/10] interconnect: qcom: qcm2290: Set AB coefficients
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 00/10] Fix up icc clock rate calculation on some platforms
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 05/10] interconnect: qcom: qcm2290: Hook up MAS_APPS_PROC's bus clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 04/10] interconnect: qcom: icc-rpm: Check for node-specific rate coefficients
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 09/10] interconnect: qcom: msm8996: Set AB/IB coefficients
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• ath10k-firmware: WCN3990: Add board file for SHIFTPHONES SHIFT6mq
  • From: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
• ath10k-firmware: WCN3990: Add board file for Oneplus 6/6T
  • From: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
• ath10k-firmware: WCN3990: Add board file for Xiaomi POCOPHONE F1
  • From: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 10/10] media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: qcom: sdx65: fix SDHCI clocks order
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: qcom: apq8064: drop label property from DSI
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: rpmh: Add RPMH clocks support for SM4450
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: qcom: apq8064: drop label property from DSI
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: qcom: sdx65: fix SDHCI clocks order
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V5 0/3] PCI: designware-ep: Fix DBI access before core init
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH V2 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 2/7] dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 2/7] dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 10/10] media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] ARM: dts: qcom: msm8660: drop 2nd clock frequency from timer
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8960: drop 2nd clock frequency from timer
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: apq8960: reflect that memory node starts at offset 0
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] clk: qcom: Add GCC driver support for SM4450
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RFC DNM] perf: Add support for Qualcomm Last-Level Cache Controller PMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/1] scripts: Add add-maintainer.py
  • From: Nicolas Schier <nicolas@xxxxxxxxx>
• Re: [PATCH V2 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V2 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 10/10] media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 00/10] Hardware wrapped key support for qcom ice and ufs
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH V2 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v12 3/6] s390/pci: Use dma-iommu layer
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v12 1/6] iommu: Allow .iotlb_sync_map to fail and handle s390's -ENOMEM return
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v12 6/6] iommu/dma: Use a large flush queue and timeout for shadow_on_flush
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v12 4/6] iommu/s390: Disable deferred flush for ISM devices
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v12 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v12 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v12 2/6] s390/pci: prepare is_passed_through() for dma-iommu
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] firmware: qcom_scm: disable SDI if required
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 3/5] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
  • From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB
  • From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
  • From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
• [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible
  • From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
  • From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
• [PATCH 0/5] Enable IPQ5018 USB2 support
  • From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
• [PATCH V2 7/7] arm64: defconfig: Build NSS Clock Controller driver for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V2 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V2 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V2 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V2 3/7] clk: qcom: gcc-ipq9574: Add gpll0_out_aux clock
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V2 0/7] Add NSS clock controller support for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V2 2/7] dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V2 1/7] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v6 0/4] Fix some issues in QCOM UFS bindings
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v3 01/16] dt-bindings: phy: migrate QMP USB PHY bindings to qcom,sc8280xp-qmp-usb3-uni-phy.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] mhi: host: Add standard ELF header image download functionality
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v7 02/24] iommu: Add IOMMU_DOMAIN_PLATFORM
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• [PATCH v7 3/3] drm/bridge_connector: implement oob_hotplug_event
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v7 1/3] drm: Add HPD state to drm_connector_oob_hotplug_event()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v7 2/3] drm/bridge_connector: stop filtering events in drm_bridge_connector_hpd_cb()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v7 0/3] drm/bridge_connector: implement OOB HPD handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• ath10k-firmware: WCN3990: Add board file for the Qualcomm Robotics RB2 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• ath10k-firmware: WCN3990: Add board file for the Qualcomm Robotics RB1 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/1] scripts: Add add-maintainer.py
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• Re: [PATCH RFC DNM] perf: Add support for Qualcomm Last-Level Cache Controller PMU
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 16/16] ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 15/16] ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 13/16] arm64: dts: qcom: sm8250: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 14/16] arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 09/16] arm64: dts: qcom: msm8996: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 11/16] arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 12/16] arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 08/16] arm64: dts: qcom: ipq8074: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 07/16] arm64: dts: qcom: ipq6018: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 10/16] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 02/16] phy: qcom-qmp-usb: simplify clock handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 06/16] phy: qcom-qmp-usb: populate offsets configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 03/16] phy: qcom-qmp-usb: rework reset handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 04/16] phy: qcom-qmp-usb: make QPHY_PCS_MISC_CLAMP_ENABLE access conditional
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 01/16] dt-bindings: phy: migrate QMP USB PHY bindings to qcom,sc8280xp-qmp-usb3-uni-phy.yaml
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 05/16] phy: qcom-qmp: move PCS MISC V4 registers to separate header
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 00/16] phy: qcom-qmp-usb: convert to newer style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: clock: qcom: Add GCC clocks for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: rpmh: Add RPMH clocks support for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sdm845: cheza doesn't support LMh node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] clk: qcom: Add GCC driver support for SM4450
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sdm845: Fix PSCI power domain names
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sdm845: cheza doesn't support LMh node
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: clock: qcom: Add GCC clocks for SM4450
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: clock: qcom: Add RPMHCC for SM4450
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/4] clk: qcom: Add GCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: clock: qcom: Add GCC clocks for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 2/4] clk: qcom: rpmh: Add RPMH clocks support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 0/4] clk: qcom: Add support for GCC and RPMHCC on SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: clock: qcom: Add RPMHCC for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH v6 0/4] Fix some issues in QCOM UFS bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 02/33] iris: vidc: add core functions
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH 00/33] Qualcomm video decoder/encoder driver
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH] thermal: Explicitly include correct DT includes
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• [PATCH v2 0/2] Enable tsens and thermal for sa8775p SoC
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• Re: [PATCH v2 7/7] arm64: dts: qcom: sm8450: add TRNG node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/7] arm64: dts: qcom: sm8550: add TRNG node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/7] Revert "arm64: dts: qcom: sm8450: Add PRNG"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/7] Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH -next] phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 5/7] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 7/7] arm64: dts: qcom: sm8450: add TRNG node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/7] Revert "arm64: dts: qcom: sm8450: Add PRNG"
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/7] arm64: qcom: sm8550: enable RNG
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 4/7] crypto: qcom-rng - Add support for trng
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 6/7] arm64: dts: qcom: sm8550: add TRNG node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 3/7] dt-bindings: crypto: qcom,prng: document that RNG on SM8450 is a TRNG
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/7] Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH -next] phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-msm8996: Use read-only RCG ops for RPM bus clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 0/4] Add initial support for SM7125 and Xiaomi SM7125 platform
  • From: David Wronek <davidwronek@xxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gcc-msm8996: Use read-only RCG ops for RPM bus clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sdm845-tama: Add camera GPIO regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sdm845-tama: Add GPIO line names for PMIC GPIOs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/3] SDM845 Xperia GPIO names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sdm845-tama: Add GPIO line names for TLMM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 0/4] Add initial support for SM7125 and Xiaomi SM7125 platform
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible
  • From: Priyansh Jain <quic_priyjain@xxxxxxxxxxx>
• [PATCH -next] phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH v5 10/10] media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 09/10] media: v4l2: Add DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 04/10] media: verisilicon: Refactor postprocessor to store more buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 03/10] media: videobuf2: Be more flexible on the number of queue stored buffers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 06/10] media: verisilicon: vp9: Use destination buffer height to compute chroma offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 05/10] media: verisilicon: Store chroma and motion vectors offset
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 07/10] media: verisilicon: postproc: Fix down scale test
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 08/10] media: verisilicon: vp9: Allow to change resolution while streaming
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 02/10] media: videobuf2: Access vb2_queue bufs array through helper functions
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 01/10] media: videobuf2: Rework offset 'cookie' encoding pattern
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 00/10] Add DELETE_BUF ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v5 2/4] arm64: dts: qcom: pm6150: Add resin and rtc nodes
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v5 3/4] arm64: dts: qcom: Add SM7125 device tree
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH v5 0/4] Add initial support for SM7125 and Xiaomi SM7125 platform
  • From: David Wronek <davidwronek@xxxxxxxxx>
• [PATCH -next] phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/6] soc: qcom: Add LLCC support for multi channel DDR
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH 2/6] soc: qcom: llcc: Refactor llcc driver to support multiple configuration
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v5 1/4] clk: qcom: branch: Add clk_branch2_mdio_ops
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: crypto: qcom,prng: document SM8550
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 1/2] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 6/6] drm/drm-file: Allow size unit selection in drm_show_memory_stats
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: ipq9574: Add support for nsscc node
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 6/6] arm64: defconfig: Build NSS Clock Controller driver for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 2/6] clk: qcom: gcc-ipq9574: Mark nssnoc clocks as critical
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] drm/panfrost: Add fdinfo support GPU load metrics
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5 21/45] drm/msm: dynamically allocate the drm-msm_gem shrinker
  • From: Qi Zheng <zhengqi.arch@xxxxxxxxxxxxx>
• Re: [PATCH v7 01/24] iommu: Add iommu_ops->identity_domain
  • From: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
• [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• [PATCH v2 6/6] drm/drm-file: Allow size unit selection in drm_show_memory_stats
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v2 5/6] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v2 2/6] drm/panfrost: Add fdinfo support GPU load metrics
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v2 1/6] drm/panfrost: Add cycle count GPU register definitions
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v2 4/6] drm/drm_file: Add DRM obj's RSS reporting function for fdinfo
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v2 0/6] Add fdinfo support to Panfrost
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v2 3/6] drm/panfrost: Add fdinfo support for memory stats
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8550: Add PRNG
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: crypto: qcom,prng: document SM8550
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• [PATCH] dt-bindings: thermal: lmh: update maintainer address
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sdm845: Fix PSCI power domain names
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sdm845: cheza doesn't support LMh node
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v2] media: dt-bindings: Convert Omnivision OV7251 to DT schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 03/11] PM / QoS: Fix constraints alloc vs reclaim locking
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] dt-bindings: use capital "OR" for multiple licenses in SPDX
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Harshit Mogalapalli <harshit.m.mogalapalli@xxxxxxxxxx>
• Re: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: arm: qcom: add sc7180-lazor board bindings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: arm: qcom: add sc7180-lazor board bindings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 10/16] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: use capital "OR" for multiple licenses in SPDX
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 1/4] clk: qcom: branch: Add clk_branch2_mdio_ops
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Add Sony Xperia 10 V (PDX235) support
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: arm: qcom: add sc7180-lazor board bindings
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v7 19/24] iommu/sun50i: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 09/24] iommu: Allow an IDENTITY domain as the default_domain in ARM32
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 06/24] iommu/tegra-gart: Remove tegra-gart
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 22/24] iommu: Add ops->domain_alloc_paging()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 10/24] iommu/exynos: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 12/24] iommu/tegra-smmu: Support DMA domains in tegra
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 00/24] iommu: Make default_domain's mandatory
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 20/24] iommu: Require a default_domain for all iommu drivers
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 08/24] iommu: Reorganize iommu_get_default_domain_type() to respect def_domain_type()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 07/24] iommu/mtk_iommu_v1: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 21/24] iommu: Add __iommu_group_domain_alloc()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 04/24] iommu: Add IOMMU_DOMAIN_PLATFORM for S390
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 17/24] iommu/ipmmu: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 13/24] iommu/omap: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 14/24] iommu/msm: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 24/24] iommu: Convert remaining simple drivers to domain_alloc_paging()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 05/24] iommu/fsl_pamu: Implement a PLATFORM domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 18/24] iommu/mtk_iommu: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 23/24] iommu: Convert simple drivers with DOMAIN_DMA to domain_alloc_paging()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 11/24] iommu/tegra-smmu: Implement an IDENTITY domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 15/24] iommu: Remove ops->set_platform_dma_ops()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 02/24] iommu: Add IOMMU_DOMAIN_PLATFORM
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 01/24] iommu: Add iommu_ops->identity_domain
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 16/24] iommu/qcom_iommu: Add an IOMMU_IDENTITIY_DOMAIN
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v7 03/24] powerpc/iommu: Setup a default domain and remove set_platform_dma_ops
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH v3 0/5] PM: domains: Add control for switching back and forth to HW control
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Fix LDO 12 regulator for PM8550
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/5] PM: domains: Add the domain HW-managed mode to the summary
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: watchdog: qcom-wdt: document IPQ5018
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH V5 6/6] scsi: ufs: qcom: Handle unipro clk HW division based on scaling conditions.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] scripts: Add add-maintainer.py
  • From: Nicolas Schier <nicolas@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: arm: qcom: add sc7180-lazor board bindings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 0/2] qcom-cpufreq-hw: add support for 4 freq domains
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 01/18] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v11 5/6] iommu/dma: Allow a single FQ in addition to per-CPU FQs
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom: check regulator enable status before disabling it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: use capital "OR" for multiple licenses in SPDX
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 2/2] arm64: dts: qcom: sc7180: Add sku_id and board id for lazor/limozeen
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 10/10] drm/msm/a6xx: Poll for GBIF unhalt status in hw_init
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 09/10] drm/msm/a6xx: Add A740 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 07/10] drm/msm/a6xx: Mostly implement A7xx gpu_state
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 08/10] drm/msm/a6xx: Add A730 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 06/10] drm/msm/a6xx: Send ACD state to QMP at GMU resume
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 05/10] drm/msm/a6xx: Add skeleton A7xx support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 04/10] drm/msm/a6xx: Add missing regs for A7XX
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: display/msm/gpu: Allow A7xx SKUs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: display/msm/gmu: Allow passing QMP handle
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 01/10] dt-bindings: display/msm/gmu: Add Adreno 7[34]0 GMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 00/10] A7xx support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] thermal: Explicitly include correct DT includes
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 2/5] PM: domains: Add the domain HW-managed mode to the summary
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 3/5] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 0/5] PM: domains: Add control for switching back and forth to HW control
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• [PATCH v5 2/2] irqchip: irq-qcom-mpm: Support passing a slice of SRAM as reg space
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v5 0/2] Resolve MPM register space situation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom: check regulator enable status before disabling it
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom: check regulator enable status before disabling it
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1] soc: qcom: Add driver to read secondary bootloader (XBL) log
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• Re: [PATCH v11 4/6] iommu/s390: Force ISM devices to use IOMMU_DOMAIN_DMA
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v3 15/15] media: qcom: camss: Comment CSID dt_id field
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 14/15] media: qcom: camss: Convert vfe_disable() from int to void
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 13/15] media: qcom: camss: Support RDI3 for VFE 17x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 11/15] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>