On Tue, Dec 05, 2023 at 12:23:10PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Set up the pin function for the Bluetooth enable GPIO.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index ce6ae0771d34..ead0c45ba60c 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1264,6 +1264,17 @@ &tlmm {
> "HST_WLAN_UART_TX",
> "HST_WLAN_UART_RX";
>
> + bt_en_state: bt-default-state {
> + bt-en {
> + pins = "gpio21";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> lt9611_irq_pin: lt9611-irq-state {
> pins = "gpio63";
> function = "gpio";
This makes no sense as a separate patch and should be squashed with the
final patch enabling bluetooth. Same for the first patch.
Johan
