From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Set up the pin function for the Bluetooth enable GPIO.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index ce6ae0771d34..ead0c45ba60c 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1264,6 +1264,17 @@ &tlmm {
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
+ bt_en_state: bt-default-state {
+ bt-en {
+ pins = "gpio21";
+ function = "gpio";
+
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
lt9611_irq_pin: lt9611-irq-state {
pins = "gpio63";
function = "gpio";
--
2.40.1
