Re: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: krzysztof.kozlowski@xxxxxxxxxx
Subject: Re: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
From: Chukun Pan <amadeus@xxxxxxxxxx>
Date: Tue, 5 Dec 2023 11:02:01 +0800
Cc: agross@xxxxxxxxxx, amadeus@xxxxxxxxxx, andersson@xxxxxxxxxx, conor+dt@xxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, konrad.dybcio@xxxxxxxxxx, krzysztof.kozlowski+dt@xxxxxxxxxx, linux-arm-msm@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, robh+dt@xxxxxxxxxx
In-reply-to: <6f4f7903-c112-428b-8082-a8eca7c5981d@linaro.org>
References: <6f4f7903-c112-428b-8082-a8eca7c5981d@linaro.org>

> That does not look like XO, but GCC_USB0_MOCK_UTMI_CLK

I don't have the datasheet, but the reference clock (XO) is 24MHz, 
and I receive the following warning:
clk: couldn't set gcc_usb0_mock_utmi_clk clk rate to 20000000 (-22), current rate: 24000000

Thanks,
Chukun

-- 
2.25.1

Follow-Ups:
- Re: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
  - From: Krzysztof Kozlowski

References:
- Re: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
  - From: Krzysztof Kozlowski

Prev by Date: Re: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: Add QUP5 SPI node
Next by Date: [PATCH v3 0/9] arm64: dts: qcom: switch UFS QMP PHY to new style of bindings
Previous by thread: Re: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
Next by thread: Re: [PATCH v2 1/1] arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
Index(es):
- Date
- Thread

[Index of Archives] [Linux ARM Kernel] [Linux ARM] [Linux Omap] [Fedora ARM] [Linux for Sparc] [IETF Annouce] [Security] [Bugtraq] [Linux MIPS] [ECOS] [Asterisk Internet PBX] [Linux API]

Powered by Linux