On 23-11-22 12:12:00, Dmitry Baryshkov wrote: > On Wed, 22 Nov 2023 at 12:04, Abel Vesa <abel.vesa@xxxxxxxxxx> wrote: > > > > Add some missing v6.20 registers offsets that are needed by the new > > Snapdragon X Elite (X1E80100) platform. > > > > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> > > --- > > drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h > > index 5385a8b60970..7402a94d1be8 100644 > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h > > @@ -14,11 +14,14 @@ > > #define QSERDES_V6_20_TX_LANE_MODE_3 0x80 > > > > #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08 > > +#define QSERDES_V6_20_RX_UCDR_SO_GAIN_RATE_2 0x18 > > #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c > > As a side note, this should be probably 0x1c. Could you please verify > it and send a fix? > Double checked. The values are correct. So I'll just put the SO_GAIN_RATE_2 below FO_GAIN_RATE_3. > > #define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20 > > #define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34 > > #define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c > > #define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0 > > +#define QSERDES_V6_20_RX_DFE_1 0xac > > +#define QSERDES_V6_20_RX_DFE_2 0xb0 > > #define QSERDES_V6_20_RX_DFE_3 0xb4 > > #define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8 > > #define QSERDES_V6_20_RX_GM_CAL 0x10c > > @@ -41,5 +44,6 @@ > > #define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220 > > #define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224 > > #define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228 > > +#define QSERDES_V6_20_RX_BKUP_CTRL1 0x22c > > > > #endif > > > > -- > > 2.34.1 > > > > > > > -- > With best wishes > Dmitry
