Re: [PATCH v1] drm/msm/dpu: improve DSC allocation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 4 Dec 2023 at 18:37, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
>
>
> On 11/29/2023 7:57 PM, Dmitry Baryshkov wrote:
> > On Wed, 29 Nov 2023 at 22:31, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
> >> A DCE (Display Compression Engine) contains two DSC hard slice encoders.
> >> Each DCE start with even DSC encoder index followed by an odd DSC encoder
> >> index. Each encoder can work independently. But Only two DSC encoders from
> >> same DCE can be paired to work together to support merge mode. In addition,
> >> the DSC with even index have to mapping to even pingpong index and DSC with
> >> odd index have to mapping to odd pingpong index at its data path. This patch
> >> improve DSC allocation mechanism with consideration of above factors.
> > Is this applicable to old DSC 1.1 encoders?
> yes, this algorithm should work with V1 too

Are the limitations (odd:odd, allocation in pairs, etc) applicable to
v1.1 encoders?

I assume that at least 'allocate two consecutive DSC for DSC merge' is
not applicable, since there are no separate DCE units.

> >
> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> >> ---
> >>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 94 +++++++++++++++++++++++++++++-----
> >>   1 file changed, 82 insertions(+), 12 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> >> index f9215643..427d70d 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> >> @@ -466,24 +466,94 @@ static int _dpu_rm_reserve_dsc(struct dpu_rm *rm,
> >>                                 struct drm_encoder *enc,
> >>                                 const struct msm_display_topology *top)
> >>   {
> >> -       int num_dsc = top->num_dsc;
> >> -       int i;
> >> +       int num_dsc = 0;
> >> +       int i, pp_idx;
> >> +       bool pair = false;
> >> +       int dsc_idx[DSC_MAX - DSC_0];
> >> +       uint32_t pp_to_enc_id[PINGPONG_MAX - PINGPONG_0];
> >> +       int pp_max = PINGPONG_MAX - PINGPONG_0;
> >> +
> >> +       if (!top->num_dsc || !top->num_intf)
> >> +               return 0;
> >> +
> >> +       /*
> >> +        * Truth:
> >> +        * 1) every layer mixer only connects to one pingpong
> >> +        * 2) no pingpong split -- two layer mixers shared one pingpong
> >> +        * 3) each DSC engine contains two dsc encoders
> >> +        *    -- index(0,1), index (2,3),... etc
> >> +        * 4) dsc pair can only happens with same DSC engine except 4 dsc
> >> +        *    merge mode application (8k) which need two DSC engines
> >> +        * 5) odd pingpong connect to odd dsc
> >> +        * 6) even pingpong connect even dsc
> >> +        */
> >> +
> >> +       /* num_dsc should be either 1, 2 or 4 */
> >> +       if (top->num_dsc > top->num_intf)       /* merge mode */
> >> +               pair = true;
> >> +
> >> +       /* fill working copy with pingpong list */
> >> +       memcpy(pp_to_enc_id, global_state->pingpong_to_enc_id, sizeof(pp_to_enc_id));
> >> +
> >> +       for (i = 0; i < ARRAY_SIZE(rm->dsc_blks); i++) {
> > && num_dsc < top->num_dsc
> >
> >> +               if (!rm->dsc_blks[i])   /* end of dsc list */
> >> +                       break;
> > I'd say, it's `continue' instead, let's just skip the index.
> >
> >> -       /* check if DSC required are allocated or not */
> >> -       for (i = 0; i < num_dsc; i++) {
> >> -               if (!rm->dsc_blks[i]) {
> >> -                       DPU_ERROR("DSC %d does not exist\n", i);
> >> -                       return -EIO;
> >> +               if (global_state->dsc_to_enc_id[i]) {   /* used */
> >> +                       /* consective dsc index to be paired */
> >> +                       if (pair && num_dsc) {  /* already start pairing, re start */
> >> +                               num_dsc = 0;
> >> +                               /* fill working copy with pingpong list */
> >> +                               memcpy(pp_to_enc_id, global_state->pingpong_to_enc_id,
> >> +                                                               sizeof(pp_to_enc_id));
> >> +                       }
> >> +                       continue;
> >>                  }
> >>
> >> -               if (global_state->dsc_to_enc_id[i]) {
> >> -                       DPU_ERROR("DSC %d is already allocated\n", i);
> >> -                       return -EIO;
> >> +               /* odd index can not become start of pairing */
> >> +               if (pair && (i & 0x01) && !num_dsc)
> >> +                       continue;
> > After looking at all conditions, can we have two different helpers?
> > One which allocates a single DSC and another one which allocates a
> > pair. For the pair you can skip odd indices at all and just check if
> > DSC_i and DSC_i+1 are free.
> >
> >> +
> >> +               /*
> >> +                * find the pingpong index which had been reserved
> >> +                * previously at layer mixer allocation
> >> +                */
> >> +               for (pp_idx = 0; pp_idx < pp_max; pp_idx++) {
> >> +                       if (pp_to_enc_id[pp_idx] == enc->base.id)
> >> +                               break;
> >>                  }
> >> +
> >> +               /*
> >> +                * dsc even index must map to pingpong even index
> >> +                * dsc odd index must map to pingpong odd index
> >> +                */
> >> +               if ((i & 0x01) != (pp_idx & 0x01))
> >> +                       continue;
> >> +
> >> +               /*
> >> +                * delete pp_idx so that it can not be found at next search
> >> +                * in the case of pairing
> >> +                */
> >> +               pp_to_enc_id[pp_idx] = NULL;
> >> +
> >> +               dsc_idx[num_dsc++] = i;
> >> +               if (num_dsc >= top->num_dsc)
> >> +                       break;
> >>          }
> >>
> >> -       for (i = 0; i < num_dsc; i++)
> >> -               global_state->dsc_to_enc_id[i] = enc->base.id;
> >> +       if (num_dsc < top->num_dsc) {
> >> +               DPU_ERROR("DSC allocation failed num_dsc=%d required=%d\n",
> >> +                                               num_dsc, top->num_dsc );
> >> +               return -ENAVAIL;
> >> +       }
> >> +
> >> +       /* reserve dsc */
> >> +       for (i = 0; i < top->num_dsc; i++) {
> >> +               int j;
> >> +
> >> +               j = dsc_idx[i];
> >> +               global_state->dsc_to_enc_id[j] = enc->base.id;
> >> +       }
> >>
> >>          return 0;
> >>   }
> >> --
> >> 2.7.4
> >>
> >



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux