DMA Engine

• Thread Index

• Re: [PATCH v4 1/4] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 0/4] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 0/2] Add support for Loongson1 DMA
  • From: Huacai Chen <chenhuacai@xxxxxxxxxx>
• [PATCH v4 4/4] dmaengine: add driver for Sophgo CV18XX/SG200X dmamux
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v4 3/4] soc/sophgo: add top sysctrl layout file for CV18XX/SG200X
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v4 0/4] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: dma: Add Loongson-1 DMA
  • From: Keguang Zhang <keguang.zhang@xxxxxxxxx>
• Re: [PATCH v6 0/2] Add support for Loongson1 DMA
  • From: Keguang Zhang <keguang.zhang@xxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: dma: Add Loongson-1 DMA
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 02/15] dmaengine: bcm2835: Add support for per-channel flags
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v2 14/15] dmaengine: bcm2835: Add BCM2711 40-bit DMA support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v6 0/2] Add support for Loongson1 DMA
  • From: Huacai Chen <chenhuacai@xxxxxxxxxx>
• [PATCH v6 0/2] Add support for Loongson1 DMA
  • From: Keguang Zhang via B4 Relay <devnull+keguang.zhang.gmail.com@xxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: dma: Add Loongson-1 DMA
  • From: Keguang Zhang via B4 Relay <devnull+keguang.zhang.gmail.com@xxxxxxxxxx>
• [PATCH v6 2/2] dmaengine: Loongson1: Add Loongson1 dmaengine driver
  • From: Keguang Zhang via B4 Relay <devnull+keguang.zhang.gmail.com@xxxxxxxxxx>
• Re: DMA range support on BCM283x
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH v2 RESEND] dmaengine: tegra186: Fix residual calculation
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 4/4] dmaengine: add driver for Sophgo CV18XX/SG200X dmamux
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v3 3/4] soc/sophgo: add top sysctrl layout file for CV18XX/SG200X
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v3 0/4] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• Re: DMA range support on BCM283x
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH] dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH] dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 01/15] dmaengine: bcm2835: Fix several spellos
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2 01/15] dmaengine: bcm2835: Fix several spellos
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v2 01/15] dmaengine: bcm2835: Fix several spellos
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2 01/15] dmaengine: bcm2835: Fix several spellos
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v2 13/15] dt-bindings: dma: Added bcm2711-dma
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v2 01/15] dmaengine: bcm2835: Fix several spellos
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2 12/15] dmaengine: bcm2835: introduce multi platform support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v2 00/15] dmaengine: bcm2835: add BCM2711 40-bit DMA support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 09/15] dmaengine: bcm2835: make address increment platform independent
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 14/15] dmaengine: bcm2835: Add BCM2711 40-bit DMA support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 15/15] ARM: dts: bcm2711: add bcm2711-dma node
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 13/15] dt-bindings: dma: Added bcm2711-dma
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 12/15] dmaengine: bcm2835: introduce multi platform support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 11/15] dmaengine: bcm2835: pass dma_chan to generic functions
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 10/15] dmaengine: bcm2385: drop info parameters
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 08/15] dmaengine: bcm2835: move CB final extra info generation into function
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 07/15] dmaengine: bcm2835: move CB info generation into separate function
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 05/15] dmaengine: bcm2835: Fixes for dma_abort
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 06/15] dmaengine: bcm2835: Support common dma-channel-mask
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 04/15] dmaengine: bcm2835: Support dma flags for multi-beat burst
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 03/15] dmaengine: bcm2835: Add NO_WAIT_RESP, DMA_WIDE_SOURCE and DMA_WIDE_DEST flag
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 02/15] dmaengine: bcm2835: Add support for per-channel flags
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 01/15] dmaengine: bcm2835: Fix several spellos
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 00/15] dmaengine: bcm2835: add BCM2711 40-bit DMA support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v2 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: xilinx: dpdma: Add support for cyclic dma mode
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v4] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: k3-udma: Fix teardown timeout for cyclic mode
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dmaengine: xilinx: dpdma: Fix race condition in vsync IRQ
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [PATCH v2 00/15] dmaengine: bcm2835: add BCM2711 40-bit DMA support
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 12/15] dmaengine: bcm2835: introduce multi platform support
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 13/15] dt-bindings: dma: Added bcm2711-dma
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v2 1/2] dmaengine: xilinx: dpdma: Fix race condition in vsync IRQ
  • From: "Sagar, Vishal" <vishal.sagar@xxxxxxx>
• Re: [PATCH] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v2 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Joy Zou <joy.zou@xxxxxxx>
• Re: [PATCH v2 1/2] dmaengine: xilinx: dpdma: Fix race condition in vsync IRQ
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v9 6/6] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 5/6] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 4/6] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 2/6] dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v9 0/6] iio: new DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] iio: new DMABUF based API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 3/3] dma: Add lockdep asserts to virt-dma
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH 2/3] dma: xilinx_dpdma: Remove unnecessary use of irqsave/restore
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH 1/3] dma: xilinx_dpdma: Fix locking
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH 0/3] dma: xilinx_dpdma: Fix locking
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH v8 6/6] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 5/6] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 4/6] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 2/6] dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 0/6] iio: new DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• DMA range support on BCM283x
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH][next] dmaengine: pch_dma: remove unused function chan2parent
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Remove T Ambarus from few mchp entries
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• RE: dmaengine: CPU stalls while loading bluetooth module
  • From: "bumyong.lee" <bumyong.lee@xxxxxxxxxxx>
• Re: dmaengine: CPU stalls while loading bluetooth module
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v3] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 3/4] dmaengine: imx-sdma: Add multi fifo for DEV_TO_DEV
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 2/4] dmaengine: imx-sdma: Support 24bit/3bytes for sg mode
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 1/4] dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram)
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 0/4] dmaengine: fsl-sdma: Some improvement for fsl-sdma
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• RE: [PATCH 3/4] dmaengine: imx-sdma: Add multi fifo for DEV_TO_DEV
  • From: Joy Zou <joy.zou@xxxxxxx>
• RE: [PATCH 2/4] dmaengine: imx-sdma: Support 24bit/3bytes for sg mode
  • From: Joy Zou <joy.zou@xxxxxxx>
• RE: [PATCH 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Joy Zou <joy.zou@xxxxxxx>
• RE: [PATCH 1/4] dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram)
  • From: Joy Zou <joy.zou@xxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram)
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 1/4] dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram)
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH V9 1/2] dmaengine: amd: Add empty Kconfig and Makefile for AMD drivers
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V10 1/1] dmaengine: amd: qdma: Add AMD QDMA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V10 0/1] AMD QDMA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• Re: [PATCH 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v7 0/6] iio: new DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/6] iio: new DMABUF based API
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH V9 1/2] dmaengine: amd: Add empty Kconfig and Makefile for AMD drivers
  • From: Tadeusz Struk <tstruk@xxxxxxxxxx>
• RE: dmaengine: CPU stalls while loading bluetooth module
  • From: "bumyong.lee" <bumyong.lee@xxxxxxxxxxx>
• [PATCH v4 7/7] crypto: starfive: Add sm4 support for JH8100
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v4 5/7] dmaengine: dw-axi-dmac: Support hardware quirks
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v4 6/7] crypto: starfive: Add sm3 support for JH8100
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v4 4/7] crypto: starfive: Use dma for aes requests
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v4 3/7] crypto: starfive: Skip unneeded key free
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v4 2/7] crypto: starfive: Update hash dma usage
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: crypto: starfive: Add jh8100 support
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v4 0/7] crypto: starfive: Add support for JH8100
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• dmaengine: CPU stalls while loading bluetooth module
  • From: karthikeyan <karthikeyan@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH 4/4] crypto: iaa - Change iaa statistics to atomic64_t
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• [PATCH 3/4] crypto: iaa - Add global_stats file and remove individual stat files
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• [PATCH 2/4] crypto: iaa - Remove comp/decomp delay statistics
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• [PATCH 1/4] crypto: iaa - fix decomp_bytes_in stats
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• [PATCH 0/4] crypto: IAA stats bugfixes and simplifications
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH 0/4] dmaengine: fsl-sdma: Some improvement for fsl-sdma
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v7 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v7 0/6] iio: new DMABUF based API
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/4] dmaengine: imx-sdma: Add i2c dma support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 3/4] dmaengine: imx-sdma: Add multi fifo for DEV_TO_DEV
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 2/4] dmaengine: imx-sdma: Support 24bit/3bytes for sg mode
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/4] dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram)
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 0/4] dmaengine: fsl-sdma: Some improvement for fsl-sdma
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v7 0/6] iio: new DMABUF based API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 5/8] iio: core: Use new helpers from overflow.h in iio_device_alloc()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/8] iio: core: NULLify private pointer when there is no private data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [SPAM] [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dmaengine: fsl-edma: add trace event support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 04/12] bcm2835-dma: Advertise the full DMA range
  • From: Andrea della Porta <aporta@xxxxxxx>
• [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH 0/2] crypto: Intel Analytics Accelerator (IAA) bugfixes
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 5/5] dmaengine: fsl-edma: add i.MX8ULP edma support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 3/5] dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 2/5] dmaengine: fsl-edma: add safety check for 'srcid'
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 1/5] dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 0/5] dmaengine: fsl-edma: add 8ulp support
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 1/5] dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: (subset) [PATCH v4 1/8] overflow: Use POD in check_shl_overflow()
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH RESEND v3 2/2] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH RESEND v3 1/2] dmaengine: axi-dmac: fix possible race in remove()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH RESEND v3 0/2] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: fsl-dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 4/5] dt-bindings: fsl-dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: fsl-dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v4 5/8] iio: core: Use new helpers from overflow.h in iio_device_alloc()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 8/8] dmaengine: ste_dma40: Use new helpers from overflow.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 8/8] dmaengine: ste_dma40: Use new helpers from overflow.h
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/5] dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] dmaengine: tegra186: Fix residual calculation
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v4 1/8] overflow: Use POD in check_shl_overflow()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: tegra186: Fix residual calculation
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: fsl-dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dmaengine: tegra186: Fix residual calculation
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• RE: [PATCH v3 1/6] dt-bindings: crypto: starfive: Add jh8100 support
  • From: JiaJie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/8] overflow: Add struct_size_with_data() and struct_data_pointer() helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v4 2/8] overflow: Add struct_size_with_data() and struct_data_pointer() helpers
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v4 3/8] iio: core: NULLify private pointer when there is no private data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/8] overflow: Use POD in check_shl_overflow()
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v4 4/8] iio: core: Calculate alloc_size only once in iio_device_alloc()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] iio: core: NULLify private pointer when there is no private data
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 6/8] spi: Use new helpers from overflow.h in __spi_alloc_controller()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: core: Calculate alloc_size only once in iio_device_alloc()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v4 5/8] iio: core: Use new helpers from overflow.h in iio_device_alloc()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 7/8] net-device: Use new helpers from overflow.h in netdevice APIs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 8/8] dmaengine: ste_dma40: Use new helpers from overflow.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 6/8] spi: Use new helpers from overflow.h in __spi_alloc_controller()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 1/8] overflow: Use POD in check_shl_overflow()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 3/8] iio: core: NULLify private pointer when there is no private data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 0/8] iio: core: New macros and making use of them
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 2/8] overflow: Add struct_size_with_data() and struct_data_pointer() helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 4/8] iio: core: Calculate alloc_size only once in iio_device_alloc()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: crypto: starfive: Add jh8100 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: crypto: starfive: Add jh8100 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v8 00/38] ep93xx device tree conversion
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• Re: [PATCH 2/2] dma: Add Ingenic PDMA driver support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: dma: Ingenic: DT bindings for Ingenic PDMA
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] dmaengine: xilinx: dpdma: Add support for cyclic dma mode
  • From: Vishal Sagar <vishal.sagar@xxxxxxx>
• [PATCH v2 1/2] dmaengine: xilinx: dpdma: Fix race condition in vsync IRQ
  • From: Vishal Sagar <vishal.sagar@xxxxxxx>
• [PATCH v2 0/2] Xilinx DPDMA fixes and cyclic dma mode support
  • From: Vishal Sagar <vishal.sagar@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: dma: Ingenic: DT bindings for Ingenic PDMA
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] dma: Add Ingenic PDMA driver support
  • From: "bin.yao" <bin.yao@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: dma: Ingenic: DT bindings for Ingenic PDMA
  • From: "bin.yao" <bin.yao@xxxxxxxxxxx>
• [PATCH 2/5] dmaengine: fsl-edma: add safety check for 'srcid'
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 5/5] dmaengine: fsl-edma: add i.MX8ULP edma support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 4/5] dt-bindings: fsl-dma: fsl-edma: add fsl,imx8ulp-edma compatible string
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 3/5] dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/5] dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 0/5] dmaengine: fsl-edma: add 8ulp support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH V9 2/2] dmaengine: amd: qdma: Add AMD QDMA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V9 1/2] dmaengine: amd: Add empty Kconfig and Makefile for AMD drivers
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH V9 0/2] AMD QDMA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH v3 5/6] crypto: starfive: Add sm3 support for JH8100
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v3 6/6] crypto: starfive: Add sm4 support for JH8100
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v3 4/6] dmaengine: dw-axi-dmac: Support hardware quirks
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v3 3/6] crypto: starfive: Use dma for aes requests
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v3 2/6] crypto: starfive: Update hash dma usage
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: crypto: starfive: Add jh8100 support
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• [PATCH v3 0/6] crypto: starfive: Add support for JH8100
  • From: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
• subscribe
  • From: delyan@xxxxxxxxx
• [PATCH] dmaengine: zynqmp_dma: rework tasklet to threaded interrupt handler
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH V8 2/2] dmaengine: amd: qdma: Add AMD QDMA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Remove T Ambarus from few mchp entries
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v8 00/38] ep93xx device tree conversion
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove T Ambarus from few mchp entries
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2] MAINTAINERS: Remove T Ambarus from few mchp entries
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove T Ambarus from few mchp entries
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] MAINTAINERS: Remove T Ambarus from few mchp entries
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v8 38/38] dma: cirrus: remove platform code
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v8 09/38] dma: cirrus: Convert to DT for Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v8 08/38] dt-bindings: dma: Add Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v8 00/38] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• Re: [PATCH] dmaengine: altera-msgdma: fix descriptors freeing logic
  • From: Eric Schwarz <eas@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] crypto: iaa - Fix comp/decomp delay statistics
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• [PATCH 1/2] crypto: iaa - Fix async_disable descriptor leak
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• [PATCH 0/2] crypto: Intel Analytics Accelerator (IAA) bugfixes
  • From: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH V8 2/2] dmaengine: amd: qdma: Add AMD QDMA driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [RESEND PATCH V8 2/2] dmaengine: amd: qdma: Add AMD QDMA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [RESEND PATCH V8 1/2] dmaengine: amd: Add empty Kconfig and Makefile for AMD drivers
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [RESEND PATCH V8 0/2] AMD QDMA driver
  • From: Lizhi Hou <lizhi.hou@xxxxxxx>
• [PATCH v7 4/6] iio: buffer-dma: Enable support for DMABUFs
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v7 0/6] iio: new DMABUF based API
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v7 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v7 2/6] dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v7 5/6] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v7 6/6] Documentation: iio: Document high-speed DMABUF based API
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v7 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: pl08x: constify pointer to char in filter function
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: change in AMD ptdma maintainer
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: constify the struct device_type usage
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH RESEND] dmaengine: ptdma: use consistent DMA masks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ptdma: use consistent DMA masks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: change in AMD ptdma maintainer
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dmaengine: axi-dmac: move to device managed probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH RESEND] dmaengine: ptdma: use consistent DMA masks
  • From: Tadeusz Struk <tstruk@xxxxxxxxx>
• Re: [PATCH] dmaengine: ptdma: use consistent DMA masks
  • From: Tadeusz Struk <tstruk@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v3 1/2] dmaengine: axi-dmac: fix possible race in remove()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v3 2/2] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v3 0/2] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2] dmaengine: axi-dmac: move to device managed probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH] MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [PATCH] dmaengine: ptdma: use consistent DMA masks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: change in AMD ptdma maintainer
  • From: Basavaraj Natikar <bnatikar@xxxxxxx>
• Re: [PATCH 1/1] dmaengine: mxs-dma: switch from dma_coherent to dma_pool
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: change in AMD ptdma maintainer
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 03/11] crypto: qce - Convert register r/w for skcipher via BAM/DMA
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH 02/11] crypto: qce - Add bam dma support for crypto register r/w
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [PATCH] MAINTAINERS: change in AMD ptdma maintainer
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• Re: [PATCH 2/4] dt-bindings: clock: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• Re: [PATCH 01/11] crypto: qce - Add support for crypto address read
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: mxs-dma: switch from dma_coherent to dma_pool
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 2/4] dt-bindings: clock: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/4 v2] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH 0/4] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v2 4/4] dmaengine: add driver for Sophgo CV18XX/SG200X dmamux
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v2 3/4] soc/sophgo: add top sysctrl layout file for CV18XX/SG200X
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: soc: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH 0/4] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH 4/4] dmaengine: add driver for Sophgo CV18XX/SG200X dmamux
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH 3/4] soc/sophgo: add top sysctrl layout file for CV18XX/SG200X
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: clock: sophgo: Add top misc controller of CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: dmaengine: Add dmamux for CV18XX/SG200X series SoC
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• [PATCH 0/4] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: ptdma: use consistent DMA masks
  • From: Basavaraj Natikar <bnatikar@xxxxxxx>
• Re: [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Lijun Pan <lijun.pan@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Lijun Pan <lijun.pan@xxxxxxxxx>
• [PATCH] dmaengine: ptdma: use consistent DMA masks
  • From: Tadeusz Struk <tstruk@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: constify the struct device_type usage
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: mxs-dma: switch from dma_coherent to dma_pool
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH v2 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/1] dmaengine: mxs-dma: switch from dma_coherent to dma_pool
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH] dmaengine: idxd: constify the struct device_type usage
  • From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
• [PATCH v2] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: make dsa_bus_type const
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-edma: correct max_segment_size setting
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2] dmaengine: idxd: Remove shadow Event Log head stored in idxd
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: axi-dmac: move to device managed probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v7 0/1] Switchtec Switch DMA Engine Driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA
  • From: "Thierry Reding" <thierry.reding@xxxxxxxxx>
• [PATCH 2/2] dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: convert atmel-xdma.txt to YAML
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: convert atmel-dma.txt to YAML
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2] dmaengine: idxd: Remove shadow Event Log head stored in idxd
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH] dt-bindings: dma: convert atmel-xdma.txt to YAML
  • From: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: dma: convert atmel-dma.txt to YAML
  • From: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
• [PATCH v2] dmaengine: idxd: Remove shadow Event Log head stored in idxd
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] dmaengine: axi-dmac: move to device managed probe
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: make dsa_bus_type const
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: make dsa_bus_type const
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: make dsa_bus_type const
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH] dmaengine: idxd: make dsa_bus_type const
  • From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
• Re: [PATCH v7 00/39] ep93xx device tree conversion
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH] dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v7 0/1] Switchtec Switch DMA Engine Driver
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Clear Event Log head in idxd upon completion of the Enable Device command
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Clear Event Log head in idxd upon completion of the Enable Device command
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Clear Event Log head in idxd upon completion of the Enable Device command
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Lijun Pan <lijun.pan@xxxxxxxxx>
• [PATCH v2 2/2] dmaengine: fsl-edma: use _Generic to handle difference type
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 1/2] dmaengine: fsl-edma: add trace event support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH] dmaengine: idxd: Clear Event Log head in idxd upon completion of the Enable Device command
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH] dmaengine: idxd: Clear Event Log head in idxd upon completion of the Enable Device command
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• [PATCH] dmaengine: idxd: Ensure safe user copy of completion record
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: Using PTDMA driver for generic DMA
  • From: Tadeusz Struk <tstruk@xxxxxxxxxx>
• [PATCH 2/2] dmaengine: fsl-edma: use _Generic to handle difference type
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/2] dmaengine: fsl-edma: add trace event support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 2/2] dmaengine: of: constify of_phandle_args in of_dma_find_controller()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dmaengine: pl08x: constify pointer to char in filter function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 03/16] dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 04/23] dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 05/29] dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 05/38] dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 05/44] dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 1/1] dmaengine: fsl-edma: correct max_segment_size setting
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Using PTDMA driver for generic DMA
  • From: Eric Pilmore <epilmore@xxxxxxxxxx>
• Re: Using PTDMA driver for generic DMA
  • From: Raju Rangoju <Raju.Rangoju@xxxxxxx>
• Re: [PATCH 00/12] Add support for BCM2712 DMA engine
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 0/6] dmaengine: fsl-edma: integrate TCD64 support for 64bit physical address
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/2] dt-bindings: mmp-dma: YAML conversion
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-qdma: init irq after reg initialization
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v7 0/6] Fix support of dw-edma HDMA NATIVE IP in remote setup
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 10/12] dmaengine: bcm2835: Support DMA-Lite channels
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 07/12] bcm2835-dma: Support dma flags for multi-beat burst
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 00/12] Add support for BCM2712 DMA engine
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v5 0/4] dma: sf-pdma: various sf-pdma updates for the mpfs platform
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 02/12] bcm2835-dma: Add proper 40-bit DMA support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 02/12] bcm2835-dma: Add proper 40-bit DMA support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 02/12] bcm2835-dma: Add proper 40-bit DMA support
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/12] Add support for BCM2712 DMA engine
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 02/12] bcm2835-dma: Add proper 40-bit DMA support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 04/12] bcm2835-dma: Advertise the full DMA range
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 05/12] bcm2835-dma: Derive slave DMA addresses correctly
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 04/12] bcm2835-dma: Advertise the full DMA range
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 06/12] dmaengine: bcm2835: Use to_bcm2711_cbaddr where relevant
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH 06/12] dmaengine: bcm2835: Use to_bcm2711_cbaddr where relevant
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v7 00/39] ep93xx device tree conversion
  • From: andy.shevchenko@xxxxxxxxx
• [PATCH 12/12] bcm2835-dma: Fixes for dma_abort
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 11/12] dmaengine: bcm2835: Rename to_bcm2711_cbaddr to to_40bit_cbaddr
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 10/12] dmaengine: bcm2835: Support DMA-Lite channels
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 09/12] dmaengine: bcm2835: Add BCM2712 support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 08/12] bcm2835-dma: Need to keep PROT bits set in CS on 40bit controller
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 07/12] bcm2835-dma: Support dma flags for multi-beat burst
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 04/12] bcm2835-dma: Advertise the full DMA range
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 06/12] dmaengine: bcm2835: Use to_bcm2711_cbaddr where relevant
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 05/12] bcm2835-dma: Derive slave DMA addresses correctly
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 02/12] bcm2835-dma: Add proper 40-bit DMA support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 03/12] bcm2835-dma: Add NO_WAIT_RESP, DMA_WIDE_SOURCE and DMA_WIDE_DEST flag
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 01/12] bcm2835-dma: Add support for per-channel flags
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH 00/12] Add support for BCM2712 DMA engine
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v8 02/13] dt-bindings: treewide: add access-controllers description
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 076d56d74f17e625b3d63cf4743b3d7d02180379
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: mmp-dma: convert to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Using PTDMA driver for generic DMA
  • From: Tadeusz Struk <tstruk@xxxxxxxxxx>
• Re: [PATCH] dmaengine: at_hdmac: add missing kernel-doc style description
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: at_hdmac: add missing kernel-doc style description
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v1 4/6] dmaengine: dw-edma: Move HDMA_V0_MAX_NR_CH definition to edma.h
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v1 4/6] dmaengine: dw-edma: Move HDMA_V0_MAX_NR_CH definition to edma.h
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v7 0/6] Fix support of dw-edma HDMA NATIVE IP in remote setup
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/1] dmaengine: fsl-qdma: init irq after reg initialization
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/1] dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
  • From: Frank Li <Frank.Li@xxxxxxx>
• [linux-next:master] BUILD REGRESSION 51b70ff55ed88edd19b080a524063446bcc34b62
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: mmp2: drop iram property
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v2 2/2] dt-bindings: mmp-dma: convert to YAML
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v2 0/2] dt-bindings: mmp-dma: YAML conversion
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH] dt-bindings: mmp-dma: convert to YAML
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH] dt-bindings: mmp-dma: convert to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/1] dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v4 0/6] dmaengine: fsl-edma: integrate TCD64 support for 64bit physical address
  • From: Frank Li <Frank.li@xxxxxxx>
• [linux-next:master] BUILD REGRESSION 06f658aadff0e483ee4f807b0b46c9e5cba62bfa
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dmaengine: at_hdmac: add missing kernel-doc style description
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• RE: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: "Rao, Nikhil" <nikhil.rao@xxxxxxxxx>
• Re: [PATCH] dmaengine: virt-dma : fix vchan error on multi-thread
  • From: Jie Hai <haijie1@xxxxxxxxxx>
• Re: [PATCH] dmaengine: dmatest: fix timeout caused by kthread_stop
  • From: Jie Hai <haijie1@xxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Boqun Feng <boqun.feng@xxxxxxxxx>
• Re: [PATCH v2 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl08x: Use kcalloc() instead of kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 41d66f96d0f15a0a2ad6fa2208f6bac1a66cbd52
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] dt-bindings: dmaengine: xilinx_dma: Remove DMA client binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v6 1/6] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 0/4] Add APIs to request TX/RX DMA channels for thread ID
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: bestcomm: Code cleanup for bcom_sram_init
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH] dmaengine: at_hdmac: add missing kernel-doc style description
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v6 1/6] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Lijun Pan <lijun.pan@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• Re: [PATCH] dmaengine: idxd: Avoid unnecessary destruction of file_ida
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• Re: [PATCH v1 5/6] PCI: qcom-ep: Provide number of read/write channel for HDMA
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH v1 0/6] Add Change to integrate HDMA with dwc ep driver
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v1 6/6] PCI: epf-mhi: Add flag to enable HDMA for SA8775P
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 5/6] PCI: qcom-ep: Provide number of read/write channel for HDMA
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH] dmaengine: idxd: Change wmb() to smp_wmb() when copying completion record to user space
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• [PATCH] dmaengine: idxd: Avoid unnecessary destruction of file_ida
  • From: Fenghua Yu <fenghua.yu@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 2/2] dmaengine: shdma: increase size of 'dev_id'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 3/3] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 2/3] dmaengine: shdma: increase size of 'dev_id'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 3/3] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 2/3] dmaengine: shdma: increase size of 'dev_id'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 3/3] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 2/3] dmaengine: shdma: increase size of 'dev_id'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 5/5] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 4/5] dmaengine: shdma: increase size of 'dev_id'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 1/5] dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 10/10] dmaengine: dw-edma: increase size of 'name' in debugfs code
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 09/10] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 08/10] dmaengine: shdma: increase size of 'dev_id'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 01/10] dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 12/12] dmaengine: dw-edma: increase size of 'name' in debugfs code
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 11/12] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 10/12] dmaengine: shdma: increase size of 'dev_id'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 01/12] dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v6 6/6] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 5/6] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 4/6] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 2/6] dmaengine: dma-axi-dmac: Implement device_prep_slave_dma_vec
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 1/6] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 0/6] iio: new DMABUF based API, v6
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH v2 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 596764183be8ebb13352b281a442a1f1151c9b06
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v7 6/6] dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• [PATCH v7 5/6] dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• [PATCH v7 4/6] dmaengine: dw-edma: Add HDMA remote interrupt configuration
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• [PATCH v7 2/6] dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• [PATCH v7 3/6] dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• [PATCH v7 0/6] Fix support of dw-edma HDMA NATIVE IP in remote setup
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• [PATCH v7 1/6] dmaengine: dw-edma: Fix the ch_count hdma callback
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• Re: [PATCH v2 6/7] arm64: dts: allwinner: h616: Add DMA controller and DMA channels
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH] dt-bindings: mmp-dma: convert to YAML
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH] dt-bindings: mmp-dma: convert to YAML
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dmaengine: pl08x: Use kcalloc() instead of kzalloc()
  • From: Erick Archer <erick.archer@xxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
  • From: "Kumar, Udit" <u-kumar1@xxxxxx>
• [PATCH] dt-bindings: mmp-dma: convert to YAML
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 7/7] arm64: dts: allwinner: h616: Add SPDIF device node
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v2 6/7] arm64: dts: allwinner: h616: Add DMA controller and DMA channels
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v2 5/7] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v2 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v2 3/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: sound: sun4i-spdif: Fix requirements for H6
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH v2 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH] crypto: iaa - Remove header table code
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 01af33cc9894b4489fb68fa35c40e9fe85df63dc
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH v5 5/8] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH] dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
  • From: Vaishnav Achath <vaishnav.a@xxxxxx>
• [PATCH v4 4/4] dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH v4 3/4] dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH v4 2/4] dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH v4 1/4] dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH v4 0/4] Add APIs to request TX/RX DMA channels for thread ID
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH] dmaengine: bestcomm: Code cleanup for bcom_sram_init
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 774551425799cb5bbac94e1768fd69eec4f78dd4
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: allwinner: h616: Add SPDIF device node
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 5/7] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 3/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: sound: sun4i-spdif: Fix requirements for H6
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• [PATCH 1/1] dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH] dmaengine: Add a null pointer check to the dma_request_chan
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• [RESEND PATCH v3] dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
  • From: Rex Zhang <rex.zhang@xxxxxxxxx>
• [PATCH v3] dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
  • From: Rex Zhang <rex.zhang@xxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: allwinner: h616: Add SPDIF device node
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 6/7] arm64: dts: allwinner: h616: Add DMA controller and DMA channels
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 5/7] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 3/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 1/7] dt-bindings: sound: sun4i-spdif: Fix requirements for H6
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH 5/7] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH v4 0/6] dmaengine: fsl-edma: integrate TCD64 support for 64bit physical address
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH 2/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH 7/7] arm64: dts: allwinner: h616: Add SPDIF device node
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH 6/7] arm64: dts: allwinner: h616: Add DMA controller and DMA channels
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH 3/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH 1/7] dt-bindings: sound: sun4i-spdif: Fix requirements for H6
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: Clear callback_result for re-used descs
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: xilinx_dma: check for invalid vdma interleaved parameters
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/3] dmaengine: fsl-qdma: Fix some error handling paths
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: k3-udma: Report short packet errors
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: at_hdmac: fix some kernel-doc warnings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [0/3] dmaengine: timb_dma: Adjustments for td_alloc_init_desc()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2] dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/3] dmaengine: timb_dma: Adjustments for td_alloc_init_desc()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: fsl-edma: fix Makefile logic
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: Add a null pointer check to the dma_request_chan
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [Linaro-mm-sig] Re: [PATCH v5 3/8] dmaengine: Add API function dmaengine_prep_slave_dma_vec()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v6 0/6] Fix support of dw-edma HDMA NATIVE IP in remote setup
  • From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
• Re: [PATCH 3/3] dmaengine: dw-edma: increase size of 'name' in debugfs code
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• [PATCH] dmaengine: at_hdmac: fix some kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/6] Fix support of dw-edma HDMA NATIVE IP in remote setup
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION ad5c60d66016e544c51ed98635a74073f761f45d
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v9 02/13] dt-bindings: treewide: add access-controllers description
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v1 6/6] PCI: epf-mhi: Add flag to enable HDMA for SA8775P
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 4/6] dmaengine: dw-edma: Move HDMA_V0_MAX_NR_CH definition to edma.h
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 5/6] PCI: qcom-ep: Provide number of read/write channel for HDMA
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 0/6] Add Change to integrate HDMA with dwc ep driver
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: xilinx: xdma: Fix kernel-doc warnings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: usb-dmac: Avoid format-overflow warning
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: sh: rz-dmac: Avoid format-overflow warning
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: imx-sdma: fix Excess kernel-doc warnings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/2] dmaengine: xilinx: xdma: Fix two clang warnings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 2/3] dmaengine: fsl-qdma: increase size of 'irq_name'
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 1/3] dmaengine: shdma: increase size of 'dev_id'
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 3/3] dmaengine: dw-edma: increase size of 'name' in debugfs code
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH] dt-bindings: dmaengine: xilinx_dma: Remove DMA client binding
  • From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
• [PATCH] dmaengine: imx-sdma: fix Excess kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 1/1] dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH] dmaengine: pl330: Clear callback_result for re-used descs
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/39] ep93xx device tree conversion
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• Re: [PATCH v7 00/39] ep93xx device tree conversion
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v7 39/39] dma: cirrus: remove platform code
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v7 10/39] dma: cirrus: Convert to DT for Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>
• [PATCH v7 09/39] dt-bindings: dma: Add Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@xxxxxxxxxx>