STM32 DMA3 is a direct memory access controller with different features depending on its hardware configuration. It is either called LPDMA (Low Power), GPDMA (General Purpose) or HPDMA (High Performance), and it can be found in new STM32 MCUs and MPUs. In STM32MP25 SoC [1], 3 HPDMAs and 1 LPDMA are embedded. Only HPDMAs are used by Linux. Before adding this new driver, this series gathers existing STM32 DMA drivers and bindings under stm32/ subdirectory and adds an entry in MAINTAINERS file. To ease review, the initial "dmaengine: Add STM32 DMA3 support" has been split into functionnalities. Patches 6 to 9 can be squashed into patch 5. Patch 10 has already been proposed [2], the API is now used in stm32-dma3 driver. Indeed, STM32 DMA3 channels can be individually reserved either because they are secure, or dedicated to another CPU. These channels are not registered in dmaengine, so id is not incremented, but, using the new API to specify the channel name, channel name matches the name in the Reference Manual and ease requesting a channel thanks to its name. [1] https://www.st.com/resource/en/reference_manual/rm0457-stm32mp25xx-advanced-armbased-3264bit-mpus-stmicroelectronics.pdf [2] https://lore.kernel.org/lkml/20231213174021.3074759-1-amelie.delaunay@xxxxxxxxxxx/ v2: - fix reference in spi/st,stm32-spi.yaml with an updated description of the dmas property to reflect the new path of STM32 DMA controllers bindings. - address Rob's remarks about st,stm32-dma3.yaml - address Vinod's remarks about stm32-dma3.c Amelie Delaunay (12): dt-bindings: dma: New directory for STM32 DMA controllers bindings dmaengine: stm32: New directory for STM32 DMA controllers drivers MAINTAINERS: Add entry for STM32 DMA controllers drivers and documentation dt-bindings: dma: Document STM32 DMA3 controller bindings dmaengine: Add STM32 DMA3 support dmaengine: stm32-dma3: add DMA_CYCLIC capability dmaengine: stm32-dma3: add DMA_MEMCPY capability dmaengine: stm32-dma3: add device_pause and device_resume ops dmaengine: stm32-dma3: improve residue granularity dmaengine: add channel device name to channel registration dmaengine: stm32-dma3: defer channel registration to specify channel name arm64: dts: st: add HPDMA nodes on stm32mp251 .../dma/{ => stm32}/st,stm32-dma.yaml | 4 +- .../bindings/dma/stm32/st,stm32-dma3.yaml | 129 ++ .../dma/{ => stm32}/st,stm32-dmamux.yaml | 4 +- .../dma/{ => stm32}/st,stm32-mdma.yaml | 4 +- .../devicetree/bindings/spi/st,stm32-spi.yaml | 2 +- MAINTAINERS | 9 + arch/arm64/boot/dts/st/stm32mp251.dtsi | 69 + drivers/dma/Kconfig | 34 +- drivers/dma/Makefile | 4 +- drivers/dma/dmaengine.c | 16 +- drivers/dma/idxd/dma.c | 2 +- drivers/dma/stm32/Kconfig | 47 + drivers/dma/stm32/Makefile | 5 + drivers/dma/{ => stm32}/stm32-dma.c | 2 +- drivers/dma/stm32/stm32-dma3.c | 1838 +++++++++++++++++ drivers/dma/{ => stm32}/stm32-dmamux.c | 0 drivers/dma/{ => stm32}/stm32-mdma.c | 2 +- include/linux/dmaengine.h | 3 +- 18 files changed, 2122 insertions(+), 52 deletions(-) rename Documentation/devicetree/bindings/dma/{ => stm32}/st,stm32-dma.yaml (97%) create mode 100644 Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml rename Documentation/devicetree/bindings/dma/{ => stm32}/st,stm32-dmamux.yaml (89%) rename Documentation/devicetree/bindings/dma/{ => stm32}/st,stm32-mdma.yaml (96%) create mode 100644 drivers/dma/stm32/Kconfig create mode 100644 drivers/dma/stm32/Makefile rename drivers/dma/{ => stm32}/stm32-dma.c (99%) create mode 100644 drivers/dma/stm32/stm32-dma3.c rename drivers/dma/{ => stm32}/stm32-dmamux.c (100%) rename drivers/dma/{ => stm32}/stm32-mdma.c (99%) -- 2.25.1
