Re: [RESEND PATCH] dmaengine: imx-sdma: support dual fifo for DEV_TO_DEV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 29, 2024 at 12:18 PM Frank Li <Frank.li@xxxxxxx> wrote:
>
> On Fri, Mar 29, 2024 at 11:28:07AM +0800, Shengjiu Wang wrote:
> > SSI and SPDIF are dual fifo interface, when support ASRC P2P
> > with SSI and SPDIF, the src fifo or dst fifo number can be
> > two.
> >
> > The p2p watermark level bit 13 and 14 are designed for
> > these use case. This patch is to complete this function
> > in driver.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> > Signed-off-by: Joy Zou <joy.zou@xxxxxxx>
> > Acked-by: Iuliana Prodan <iuliana.prodan@xxxxxxx>
>
> This already in my sdma improvement patch list.
>
> https://lore.kernel.org/imx/20240318-sdma_upstream-v3-0-da37ddd44d49@xxxxxxx/T/#m59e4e03a527103de7bf1a7fe86e8fbc570454970
>
> This have more nice commit message. Can I take one into my patch series to
> avoid conflict.

Yes, please.

best regards
wang shengjiu
>
> Frank
>
> > ---
> >  drivers/dma/imx-sdma.c | 18 +++++++++++++++++-
> >  1 file changed, 17 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> > index 9b42f5e96b1e..079e6e8f4f59 100644
> > --- a/drivers/dma/imx-sdma.c
> > +++ b/drivers/dma/imx-sdma.c
> > @@ -137,7 +137,11 @@
> >   *                                           0: Source on AIPS
> >   *   12              Destination Bit(DP)     1: Destination on SPBA
> >   *                                           0: Destination on AIPS
> > - *   13-15           ---------               MUST BE 0
> > + *   13              Source FIFO             1: Source is dual FIFO
> > + *                                           0: Source is single FIFO
> > + *   14              Destination FIFO        1: Destination is dual FIFO
> > + *                                           0: Destination is single FIFO
> > + *   15              ---------               MUST BE 0
> >   *   16-23           Higher WML              HWML
> >   *   24-27           N                       Total number of samples after
> >   *                                           which Pad adding/Swallowing
> > @@ -168,6 +172,8 @@
> >  #define SDMA_WATERMARK_LEVEL_SPDIF   BIT(10)
> >  #define SDMA_WATERMARK_LEVEL_SP              BIT(11)
> >  #define SDMA_WATERMARK_LEVEL_DP              BIT(12)
> > +#define SDMA_WATERMARK_LEVEL_SD              BIT(13)
> > +#define SDMA_WATERMARK_LEVEL_DD              BIT(14)
> >  #define SDMA_WATERMARK_LEVEL_HWML    (0xFF << 16)
> >  #define SDMA_WATERMARK_LEVEL_LWE     BIT(28)
> >  #define SDMA_WATERMARK_LEVEL_HWE     BIT(29)
> > @@ -1255,6 +1261,16 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
> >               sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP;
> >
> >       sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT;
> > +
> > +     /*
> > +      * Limitation: The p2p script support dual fifos in maximum,
> > +      * So when fifo number is larger than 1, force enable dual
> > +      * fifos.
> > +      */
> > +     if (sdmac->n_fifos_src > 1)
> > +             sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SD;
> > +     if (sdmac->n_fifos_dst > 1)
> > +             sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DD;
> >  }
> >
> >  static void sdma_set_watermarklevel_for_sais(struct sdma_channel *sdmac)
> > --
> > 2.34.1
> >





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux