Do some small clean up.
0c562876972ee dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
d9b66cb5fdf62 dmaengine: fsl-edma: add safety check for 'srcid'
aae21b7528311 dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK
Update binding doc.
23a1d1a6609fa dt-bindings: fsl-dma: fsl-edma: add fsl,imx8ulp-edma compatible string
Add 8ulp support.
dmaengine: fsl-edma: add i.MX8ULP edma support
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Changes in v3:
- Change clock name form CHXX-CLK to chxx
- Fix typeo 'clock'
- Add dma-cell description
- About clock-names:
items:
oneOf:
- const: dma
- pattern: ...
Which already detect naming wrong, for example:
clock-names = "dma", "ch00", "ch01", "ch02", "ch03",
....
"ch28", "ch29", "ch30", "abcc";
arch/arm64/boot/dts/freescale/imx8ulp-evk.dtb: dma-controller@29010000: clock-names:32: 'oneOf' conditional failed, one must be fixed:
'dma' was expected
'abcc' does not match '^ch(0[0-9]|[1-2][0-9]|3[01])$'
Only lose order check, such as ch00, dma, ch03, ch02, can pass check.
I think it is good enough.
I tried rob's suggestion, but met some technology issue. Detail see
https://lore.kernel.org/imx/20240229-8ulp_edma-v2-0-9d12f883c8f7@xxxxxxx/T/#mc5767dd505d4b7cfc66586a0631684a57e735476
- Link to v2: https://lore.kernel.org/r/20240229-8ulp_edma-v2-0-9d12f883c8f7@xxxxxxx
Changes in v2:
Fixed dt-bind about clocks number restriction for vf610. Keep the same
restriction for other compatible string.
Send out v2 to avoid consiste test rebot report build error.
Fixed build error
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@xxxxxxxxx>
| Closes: https://lore.kernel.org/oe-kbuild-all/202402292240.149bq00a-lkp@xxxxxxxxx/
Rework dt-binding commit message. Add reason why change clk number to 33.
- Link to v1: https://lore.kernel.org/r/20240227-8ulp_edma-v1-0-7fcfe1e265c2@xxxxxxx
---
Frank Li (3):
dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
dmaengine: fsl-edma: add safety check for 'srcid'
dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK
Joy Zou (2):
dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
dmaengine: fsl-edma: add i.MX8ULP edma support
.../devicetree/bindings/dma/fsl,edma.yaml | 40 +++++++++++++++++-
drivers/dma/fsl-edma-common.c | 6 +++
drivers/dma/fsl-edma-common.h | 2 -
drivers/dma/fsl-edma-main.c | 47 ++++++++++++++++------
drivers/dma/mcf-edma-main.c | 4 +-
5 files changed, 80 insertions(+), 19 deletions(-)
---
base-commit: 37cbf12c590dbe3e66c6d489aaf9b35f7b6a0670
change-id: 20240227-8ulp_edma-12ee2648d74b
Best regards,
---
Frank Li <Frank.Li@xxxxxxx>
