Linux Device Tree
[Prev Page][Next Page]
- Re: [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/8] clk: qcom: gdsc: Enable supply reglator in GPU GX handler
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [RFC PATCH 1/2] dt-bindings: mfd: Add ROHM BD71828 system-power-controller property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [RFC PATCH 2/2] mfd: rohm-bd71828: Add power off functionality
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH v4 2/2] backlight: Add new lm3509 backlight driver
- From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
- Re: [PATCH v3 0/4] riscv: sophgo: add reset support for SG2042
- From: patchwork-bot+linux-riscv@xxxxxxxxxx
- Re: [PATCH RESEND 1/2] dt-bindings: arm: qcom,coresight-tpda: drop redundant type from ports
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v11 0/7] drm/meson: add support for MIPI DSI Display
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v11 2/7] clk: meson: add vclk driver
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v11 6/7] arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v11 4/7] drm/meson: gate px_clk when setting rate
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH RESEND 1/2] dt-bindings: arm: qcom,coresight-tpda: drop redundant type from ports
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [RESEND PATCH] dt-bindings: display: sony, td4353-jdi: allow width-mm and height-mm
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v6 05/11] riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2 5/7] ARM: dts: samsung: exynos5433: specify the SPI FIFO depth
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: backlight: Add Texas Instruments LM3509
- From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: amd: use capital "OR" for multiple licenses in SPDX
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: (subset) [PATCH 2/2] arm64: dts: juno: fix thermal zone node names
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/4] ARM: dts: samsung: smdkv310: fix keypad no-autorepeat
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: samsung: s5pv210: align onenand node name with bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: pinctrl: samsung: drop unused header with register constants
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [RESEND PATCH] dt-bindings: display: sony,td4353-jdi: allow width-mm and height-mm
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 2/2] dt-bindings: timer: narrow regex for unit address to hex numbers
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH RESEND 2/2] dt-bindings: arm: qcom,coresight-tpda: fix indentation in the example
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [RESEND PATCH v4 3/3] dt-bindings: display: novatek,nt36523: define ports
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [RESEND PATCH v4 2/3] dt-bindings: display: novatek,nt35950: define ports
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [RESEND PATCH] dt-bindings: display: sony,td4353-jdi: allow width-mm and height-mm
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
- From: Beleswar Padhi <b-padhi@xxxxxx>
- [PATCH] arm64: dts: qcom: sdx75: add unit address to soc node
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 2/2] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v3 2/3] arm64: dts: qcom: sm8650: add support for the SM8650-HDK board
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: arm: qcom: Document the HDK8650 board
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v3 0/3] arm64: qcom: sm8650: add support for the SM8650-HDK board
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: add IPQ9574 interconnect clocks support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 3/4] clk: qcom: add IPQ9574 interconnect clocks support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 2/4] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: clock: Add interconnect-cells
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v3 0/2] Add properties in dwmac-stm32 documentation
- From: Christophe Roullier <christophe.roullier@xxxxxxxxxxx>
- [RESEND PATCH v4 1/3] dt-bindings: display: panel: add common dual-link schema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] docs: dt-bindings: add missing address/size-cells to example
- From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
- [PATCH v2 0/4] Add interconnect driver for IPQ9574 SoC
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: net: add phy-supply property for stm32
- From: Christophe Roullier <christophe.roullier@xxxxxxxxxxx>
- Re: [PATCH v4 3/8] clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
- [PATCH] ARM: dts: stm32: move can3 node from stm32f746 to stm32f769
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
- From: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxxxxxx>
- [PATCH 0/2] Add initial ARM MHUv3 mailbox support
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- [PATCH 2/2] mailbox: arm_mhuv3: Add driver
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v8] dt-bindings: ata: imx-pata: Convert to dtschema
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- [PATCH] docs: dt-bindings: add missing address/size-cells to example
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v3 0/1] Add StarFive JH8100 dwmac support
- From: Tan Chun Hau <chunhau.tan@xxxxxxxxxxxxxxxx>
- Re: [Upstream] [PATCH 0/2] i.MX93 ADC calibration settings
- From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
- [PATCH v3 1/1] dt-bindings: net: starfive,jh7110-dwmac: Add StarFive JH8100 support
- From: Tan Chun Hau <chunhau.tan@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] i.MX93 ADC calibration settings
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2] arm64: dts: ti: verdin-am62: use SD1 CD as GPIO
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v8 2/2] media: i2c: Add GC08A3 image sensor driver
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: mtd: atmel-nand: convert txt to yaml
- From: <Balamanikandan.Gunasundar@xxxxxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH net-next 1/4] dt-bindings: net: dsa: realtek: describe LED usage
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
- From: WTLI <wtli@xxxxxxxxxxx>
- [PATCH v8 1/8] usb: misc: onboard_hub: use device supply names
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v8 5/8] ARM: multi_v7_defconfig: update ONBOARD_USB_HUB to ONBOAD_USB_DEV
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- [PATCH v8 3/8] drm: ci: arm64.config: update ONBOARD_USB_HUB to ONBOARD_USB_DEV
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: hwmon: Add maxim max31790 driver bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v8 7/8] ASoC: dt-bindings: xmos,xvf3500: add XMOS XVF3500 voice processor
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- [PATCH v8 4/8] arm64: defconfig: update ONBOARD_USB_HUB to ONBOARD_USB_DEV
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- [PATCH v8 0/8] usb: misc: onboard_hub: add support for XMOS XVF3500
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- [PATCH v8 8/8] usb: misc: onboard_dev: add support for XMOS XVF3500
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- [PATCH v8 2/8] usb: misc: onboard_hub: rename to onboard_dev
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- Re: [PATCH V2 RESEND 1/6] dt-bindings: clock: qcom: Add SM8650 video clock controller
- From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
- Re: [PATCH V2 RESEND 1/6] dt-bindings: clock: qcom: Add SM8650 video clock controller
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH V2 RESEND 1/6] dt-bindings: clock: qcom: Add SM8650 video clock controller
- From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
- Re: [PATCH V2 RESEND 6/6] arm64: dts: qcom: sm8650: Add video and camera clock controllers
- From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
- [PATCH v1 0/2] Patches for rockchip clk input / output switch
- From: Sugar Zhang <sugar.zhang@xxxxxxxxxxxxxx>
- [PATCH v1 2/2] dt-bindings: clock: rockchip: Add support for clk input / output switch
- From: Sugar Zhang <sugar.zhang@xxxxxxxxxxxxxx>
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- Re: [PATCH v2] gpio: Add ChromeOS EC GPIO driver
- From: patchwork-bot+chrome-platform@xxxxxxxxxx
- Re: [PATCH 0/2] mfd: cros_ec_dev: Add gpio device and DT binding
- From: patchwork-bot+chrome-platform@xxxxxxxxxx
- Re: [PATCH v2] arm64: dts: rockchip: Add cache information to the SoC dtsi for RK3328
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Qingfang Deng <dqfext@xxxxxxxxx>
- Re: [PATCH 0/2] mfd: cros_ec_dev: Add gpio device and DT binding
- From: patchwork-bot+chrome-platform@xxxxxxxxxx
- Re: [PATCH v9 2/2] dt-bindings: mtd: fixed-partition: Add binman compatibles
- From: Simon Glass <sjg@xxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add cache information to the SoC dtsi for RK356x
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v2] riscv: dts: sophgo: add watchdog dt node for CV1800
- From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
- Re: [PATCH v2] gpio: Add ChromeOS EC GPIO driver
- From: patchwork-bot+chrome-platform@xxxxxxxxxx
- Re: [PATCH v2 0/3] rockchip: small DTS fixes for RK3399 Puma
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi CM5
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add cache information to the SoC dtsi for RK3328
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add cache information to the SoC dtsi for RK356x
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- [PATCH v7 15/15] [DNI] arm64: dts: broadcom: Add overlay for Raspberry Pi 4B IMX219 camera
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 14/15] ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 13/15] ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 12/15] ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 11/15] ARM: dts: bcm2835: Add Unicam CSI nodes
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 10/15] ARM: dts: bcm2835-rpi: Move firmware-clocks from bcm2711 to bcm2835
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 08/15] dt-bindings: media: Add bindings for bcm2835-unicam
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v7 00/15] media: Add driver for the Raspberry Pi <5 CSI-2 receiver
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v4 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v4 2/4] dt-bindings: serial: fsl-linflexuart: add compatible for S32G3
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v4 1/4] dt-bindings: arm: fsl: add NXP S32G3 board
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v4 0/4] NXP S32G3 SoC initial bring-up
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- Re: [PATCH RESEND v5 1/2] phy: Add Embedded DisplayPort and DisplayPort submodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 0/6] iio: accel: adxl345: Add spi-3wire feature
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v2 2/2] iio: health: max30102: add support for max30101
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 0/2] iio: health: max30102: add support for max30101
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v3 4/6] iio: accel: adxl345: Remove single info instances
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v3 3/6] iio: accel: adxl345: Add spi-3wire option
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v4 2/2] drm/msm/dp: Add support for the X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 0/2] drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH RESEND v5 2/2] phy: qcom: edp: Add set_mode op for configuring eDP/DP submode
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH RESEND v5 1/2] phy: Add Embedded DisplayPort and DisplayPort submodes
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH RESEND v5 0/2] phy: qcom: edp: Allow eDP/DP configuring via set_mode op
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH 06/25] ASoC: meson: g12a-toacodec: fix "Lane Select" width
- From: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Icenowy Zheng <uwu@xxxxxxxxxx>
- Re: [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Icenowy Zheng <uwu@xxxxxxxxxx>
- TownHub Contact Form
- From: TownHub Theme <wordpress@xxxxxxxxxxxxx>
- Re: [PATCH v8 4/4] riscv: dts: thead: Enable LicheePi 4A eMMC and microSD
- From: Xi Ruoyao <xry111@xxxxxxxxxxx>
- [PATCH 2/2] ARM: dts: qcom: Add support for Motorola Moto G (2013)
- From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013)
- From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: imx93: Make calibration properties configurable
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/2] i.MX93 ADC calibration settings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/6] iio: accel: adxl345: Add spi-3wire feature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 5/6] iio: accel: adxl345: Group bus configuration
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/6] iio: accel: adxl345: Remove single info instances
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/6] iio: accel: adxl345: Add spi-3wire option
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 7/7] iio: adc: ad7380: add support for ad738x-4 4 channels variants
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 5/7] iio: adc: ad7380: prepare for parts with more channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 4/7] iio: adc: ad7380: add support for pseudo-differential parts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add support for AD4000
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/7] iio: adc: ad7380: new driver for AD7380 ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- RE: [PATCH v5 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
- Re: [PATCH net-next v2 0/9] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
- From: Benjamin Bigler <benjamin@xxxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi CM5
- From: Andy Yan <andyshrk@xxxxxxx>
- Re: [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: health: maxim,max30102: fix compatible check
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v5 4/4] clk: imx: add i.MX95 BLK CTL clk driver
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v5 3/4] dt-bindings: clock: add i.MX95 clock header
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v5 2/4] dt-bindings: clock: support i.MX95 Display Master CSR module
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v5 1/4] dt-bindings: clock: support i.MX95 BLK CTL module
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v5 0/4] Add support i.MX95 BLK CTL module clock features
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH 1/1] arm64: dts: rockchip: disable analog audio for rock-5b
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- Re: [PATCH net-next 1/4] dt-bindings: net: dsa: realtek: describe LED usage
- From: Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>
- Re: [PATCH v8 4/4] riscv: dts: thead: Enable LicheePi 4A eMMC and microSD
- From: Drew Fustini <drew@xxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: rtc: armada-380-rtc: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: rtc: armada-380-rtc: convert to dtschema
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- [PATCH 4/4] dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 3/4] dt-bindings: rtc: digicolor-rtc: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 2/4] dt-bindings: rtc: alphascale,asm9260: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 1/4] dt-bindings: rtc: armada-380-rtc: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 0/4] dt-bindings: rtc: convert multiple devices to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add support for AD4000
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v3 1/5] dt-bindings: mfd: Add rk816 binding
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH v9 1/2] dt-bindings: mtd: fixed-partitions: Add alignment properties
- From: Simon Glass <sjg@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Deepak Gupta <debug@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add support for AD4000
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: net: ipq4019-mdio: add IPQ9574 compatible
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 04/25] clk: meson: a1: add the audio clock controller driver
- From: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: Fixing the devicetree of Rock 5 Model B (and possibly others)
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- Re: Fixing the devicetree of Rock 5 Model B (and possibly others)
- From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
- Re: Fixing the devicetree of Rock 5 Model B (and possibly others)
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: Fixing the devicetree of Rock 5 Model B (and possibly others)
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- Fixing the devicetree of Rock 5 Model B (and possibly others)
- From: Pratham Patel <prathampatel@xxxxxxxxxxxxxx>
- [PATCH v5 00/11] Turris Omnia MCU driver
- From: Marek Behún <kabel@xxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: ipq9574: add MDIO bus
- From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: net: ipq4019-mdio: add IPQ9574 compatible
- From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
- [PATCH v3 5/5] dmaengine: fsl-edma: add i.MX8ULP edma support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 3/5] dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 2/5] dmaengine: fsl-edma: add safety check for 'srcid'
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 1/5] dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 0/5] dmaengine: fsl-edma: add 8ulp support
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v3 1/5] dt-bindings: mfd: Add rk816 binding
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 6/6] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 2/2] hwmon: pmbus: adp1050: Add driver support
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: hwmon: pmbus: adp1050: add bindings
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 5/5] dt-bindings: hwmon: ibm,p8-occ-hwmon: move to trivial devices
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: hwmon: stts751: convert to dtschema
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 3/5] dt-bindings: hwmon: pwm-fan: drop text file
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/5] dt-bindings: hwmon: as370: convert to dtschema
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: hwmon: max6650: convert to dtschema
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 5/5] regulator: rk808: Add RK816 support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v3 4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v3 3/5] pinctrl: rk805: Add rk816 pinctrl support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v3 2/5] mfd: rk8xx: Add RK816 support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v3 1/5] dt-bindings: mfd: Add rk816 binding
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v3 0/5] Add RK816 PMIC support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v3 6/6] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v3 5/6] iio: accel: adxl345: Group bus configuration
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v3 4/6] iio: accel: adxl345: Remove single info instances
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v3 3/6] iio: accel: adxl345: Add spi-3wire option
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v3 2/6] iio: accel: adxl345: Make data_range obsolete
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v3 1/6] iio: accel: adxl345: Pass function pointer to core
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v3 0/6] iio: accel: adxl345: Add spi-3wire feature
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: [PATCH] of: property: fw_devlink: Fix stupid bug in remote-endpoint parsing
- From: John Watts <contact@xxxxxxxxxx>
- [PATCH v6 00/11] riscv: add initial support for Canaan Kendryte K230
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 04/11] dt-bindings: interrupt-controller: Add Canaan K230 PLIC
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 03/11] dt-bindings: timer: Add Canaan K230 CLINT
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 02/11] dt-bindings: add Canaan K230 boards compatible strings
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v6 09/11] reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 07/11] clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 11/11] riscv: config: enable ARCH_CANAAN in defconfig
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 10/11] riscv: dts: add initial canmv-k230 and k230-evb dts
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 08/11] pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 05/11] riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 06/11] soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 01/11] dt-bindings: riscv: Add T-HEAD C908 compatible
- From: Yangyu Chen <cyy@xxxxxxxxxxxx>
- [PATCH v6 4/4] pinctrl: Implementation of the generic scmi-pinctrl driver
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 2/4] dt-bindings: firmware: arm,scmi: support pinctrl protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 1/4] firmware: arm_scmi: introduce helper get_max_msg_size
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 0/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: mfd: Add rk816 binding
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH v4 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: mfd: Add rk816 binding
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: leds: add LED_FUNCTION_MOBILE for mobile network
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: mfd: Add rk816 binding
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: mfd: Add rk816 binding
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 0/9] Setting live video input format for ZynqMP DPSUB
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sm8250-xiaomi-elish: set pm8150b_vbus regulator-min-microamp and regulator-max-microamp
- From: Jianhua Lu <lujianhua000@xxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
- [PATCH v2 5/5] regulator: rk808: Add RK816 support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v2 4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v2 2/5] mfd: rk8xx: Add RK816 support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v2 3/5] pinctrl: rk805: Add rk816 pinctrl support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v2 1/5] dt-bindings: mfd: Add rk816 binding
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v2 0/5] Add RK816 PMIC support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH v2 2/2] dt-bindings: leds: add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
- From: INAGAKI Hiroshi <musashino.open@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: leds: add LED_FUNCTION_MOBILE for mobile network
- From: INAGAKI Hiroshi <musashino.open@xxxxxxxxx>
- [PATCH v2 0/2] dt-bindings: leds: add LED_FUNCTION_* mainly for router devices
- From: INAGAKI Hiroshi <musashino.open@xxxxxxxxx>
- Re: [PATCH 2/5] mfd: rk8xx: Add RK816 support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/2] ASoC: dt-bindings: fsl-asoc-card: convert to YAML
- From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v1 2/2] media: i2c: Add GC05A2 image sensor driver
- From: Zhi Mao (毛智) <zhi.mao@xxxxxxxxxxxx>
- [PATCH v8 2/2] media: i2c: Add GC08A3 image sensor driver
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- [PATCH v8 1/2] media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- [PATCH v8 0/2] media: i2c: Add support for GC08A3 sensor
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- Re: [PATCH 2/2] of: property: fw_devlink: Fix links to supplier when created from phandles
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- Re: [PATCH] of: property: fw_devlink: Fix stupid bug in remote-endpoint parsing
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- [PATCH v2 2/2] media: i2c: Add GC05A2 image sensor driver
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- [PATCH v2 1/2] media: dt-bindings: i2c: add GalaxyCore GC05A2 image sensor
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- [PATCH v2 0/2] media: i2c: Add support for GC05A2 sensor
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: sm8450: Update SNPS Phy parameters for QRD platform
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH V2 RESEND 6/6] arm64: dts: qcom: sm8650: Add video and camera clock controllers
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH V2 RESEND 2/6] clk: qcom: videocc-sm8550: Add support for videocc XO clk ares
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: add IPQ9574 interconnect clocks support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v2 00/21] Add PCIe bridge node in DT for Qcom SoCs
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/2] iio: adc: Add support for AD4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: adc: Add AD4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH 0/2] Add support for AD4000 series
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Re: [PATCH 2/5] mfd: rk8xx: Add RK816 support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH v3 5/5] dt-bindings: hwmon: ibm,p8-occ-hwmon: move to trivial devices
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 4/5] dt-bindings: hwmon: stts751: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 3/5] dt-bindings: hwmon: pwm-fan: drop text file
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 1/5] dt-bindings: hwmon: as370: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 0/5] dt-bindings: hwmon: convert multiple devices to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH 3/8] block: add new genhd flag GENHD_FL_NVMEM
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [PATCH 0/8] block: implement NVMEM provider
- From: Bart Van Assche <bvanassche@xxxxxxx>
- RE: [PATCH v3 7/9] drm/atomic-helper: Add select_output_bus_format callback
- From: "Klymenko, Anatoliy" <Anatoliy.Klymenko@xxxxxxx>
- RE: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: "Klymenko, Anatoliy" <Anatoliy.Klymenko@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 1/5] dt-bindings: misc: Add mikrobus-connector
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v4 4/5] dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 3/5] dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
- From: Conor Dooley <conor@xxxxxxxxxx>
- RE: [PATCH net-next v3 08/12] net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames
- From: Selvamani Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>
- Re: [PATCH v1 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: remoteproc: add Versal-NET platform
- From: Tanmay Shah <tanmay.shah@xxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 2/2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: nvmem: Remove fsl,t1023-sfp in favor of fsl,layerscape-sfp
- From: Sean Anderson <sean.anderson@xxxxxxxxx>
- Re: [PATCH v4 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 1/5] dt-bindings: misc: Add mikrobus-connector
- From: Ayush Singh <ayushdevel1325@xxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: pm7250b: Add a TCPM description
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: nvmem: Remove fsl,t1023-sfp in favor of fsl,layerscape-sfp
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [PATCH 4/8] block: implement NVMEM provider
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 3/8] block: add new genhd flag GENHD_FL_NVMEM
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 0/8] block: implement NVMEM provider
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: media: rockchip-rga: add rockchip,rk3588-rga
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 4/5] dt-bindings: hwmon: stts751: convert to dtschema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/5] mfd: rk8xx: Add RK816 support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: usb: qcom,pmic-typec: Add support for the PM7250B PMIC
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v1 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 4/8] block: implement NVMEM provider
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [PATCH 0/8] block: implement NVMEM provider
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [PATCH 3/8] block: add new genhd flag GENHD_FL_NVMEM
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [PATCH 1/4] dt-bindings: soc: mediatek: Add support for MT8188 VPPSYS
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: media: mediatek: mdp3: Add support for MT8188 RDMA
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Deepak Gupta <debug@xxxxxxxxxxxx>
- Re: [PATCH v2 4/4] virt: vmgenid: add support for devicetree bindings
- From: "Landge, Sudan" <sudanl@xxxxxxxxxxxx>
- Re: [PATCH v4 2/8] clk: qcom: gdsc: Enable supply reglator in GPU GX handler
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Deepak Gupta <debug@xxxxxxxxxxxx>
- Re: [PATCH v2] spi: dt-bindings: jcore,spi: convert spi-jcore to dtschema
- From: Kousik Sanagavarapu <five231003@xxxxxxxxx>
- [PATCH 1/1] arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v1 0/4] virt: vmgenid: Add devicetree bindings support
- From: "Landge, Sudan" <sudanl@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: nvmem: Remove fsl,t1023-sfp in favor of fsl,layerscape-sfp
- From: Sean Anderson <sean.anderson@xxxxxxxxx>
- Re: [PATCH v7 7/7] mtd: ubi: provide NVMEM layer over UBI volumes
- From: Richard Weinberger <richard@xxxxxx>
- Re: [PATCH v4 10/11] pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO
- From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [PATCH v7 7/7] mtd: ubi: provide NVMEM layer over UBI volumes
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [RFC PATCH 2/3] drm/tidss: Add support for display sharing
- From: Devarsh Thakkar <devarsht@xxxxxx>
- Re: [PATCH v4 10/11] pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO
- From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH v2 2/2] clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 0/2] Add OSTM support for Renesas RZ/V2H(P) SoC
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH v2] spi: dt-bindings: jcore,spi: convert spi-jcore to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/1] ASoC: dt-bindings: fsl-audmix: Convert fsl,audmix.txt to yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: hwmon: pmbus: adp1050: add bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/4] media: dt-binding: media: Document rk3588’s vepu121
- From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
- [PATCH v2 1/1] ASoC: dt-bindings: fsl-esai: Convert fsl,esai.txt to yaml
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH 2/2] dt-bindings: leds: add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
- From: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 5/5] serial: sh-sci: Add support for RZ/V2H(P) SoC
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v4 4/5] dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v4 3/5] dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v4 2/5] dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v4 1/5] dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v4 0/5] Add SCIF support for Renesas RZ/V2H(P) SoC
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- Re: [PATCH v4 2/4] arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v8 6/8] perf: imx_perf: add support for i.MX95 platform
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v8 5/8] perf: imx_perf: fix counter start and config sequence
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v8 4/8] perf: imx_perf: refactor driver for imx93
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v1 0/4] virt: vmgenid: Add devicetree bindings support
- From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH net-next v5 13/17] net: pse-pd: Use regulator framework within PSE framework
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH v4 10/11] pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO
- From: Bhargav Raviprakash <bhargav.r@xxxxxxxx>
- Re: [PATCH net-next v5 13/17] net: pse-pd: Use regulator framework within PSE framework
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: dt-bindings: fsl-asoc-card: convert to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: exynos: gs101: define all PERIC USI nodes
- From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
- Re: [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH v2 4/4] virt: vmgenid: add support for devicetree bindings
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [PATCH v3 2/2] drm/msm/dp: Add support for the X1E80100
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v1 0/4] virt: vmgenid: Add devicetree bindings support
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3 2/2] drm/msm/dp: Add support for the X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v3 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v3 0/2] drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH v1] arm64: dts: freescale: verdin-imx8mp: enable Verdin I2C_3_HDMI interface
- From: Vitor Soares <ivitro@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: dt-bindings: fsl-asoc-card: convert to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 3/3] power: reset: add new gs101-poweroff driver
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: qcom: sm8250: describe HS signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
- From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: qcom: sm8250: describe HS signals properly
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2 3/7] phy: qcom: qmp-pcie: register second optional PHY AUX clock
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 1/2] arm64: dts: qcom: sm8250: describe HS signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 0/2] arm64: dts: qcom: sm8250: fix description of the Type-C signals
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 0/2] dt-bindings: usb: qcom,pmic-typec: OF graph corrections
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: add IPQ9574 interconnect clocks support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: 回复: [PATCH RFC 03/21] media: cadence: csi2rx: Support runtime PM
- From: Jai Luthra <j-luthra@xxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB role switching
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB role switching
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 3/7] phy: qcom: qmp-pcie: register second optional PHY AUX clock
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v2 4/7] phy: qcom: qmp-pcie: register PHY AUX clock for SM8[456]50 4x2 PCIe PHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 3/7] phy: qcom: qmp-pcie: register second optional PHY AUX clock
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH net-next v5 13/17] net: pse-pd: Use regulator framework within PSE framework
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH v2 2/7] phy: qcom: qmp-pcie: refactor clock register code
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: pm7250b: Add a TCPM description
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 1/2] ASoC: dt-bindings: fsl-asoc-card: convert to YAML
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH 2/2] ARM: dts: imx6sx-nitrogen6sx: drop incorrect cpu-dai property
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH 0/2] ASoC: dt-bindings: convert fsl-asoc-card.txt to YAML
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- Re: [PATCH 1/5] dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: arm: qcom,coresight-funnel: Add label for multi-ouput
- From: Tingwei Zhang <quic_tingweiz@xxxxxxxxxxx>
- Re: [PATCH v5 09/21] drivers: crypto: meson: process more than MAXDESCS descriptors
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH 1/2] dt-bindings: arm64: marvell: add solidrun cn9130 clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- 回复: [PATCH RFC 03/21] media: cadence: csi2rx: Support runtime PM
- From: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: hwmon: Add maxim max31790 driver bindings
- From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [RFC v3 04/16] clk: starfive: Convert the word "jh71x0" to "starfive"
- From: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- Re: [PATCH v3 7/9] drm/atomic-helper: Add select_output_bus_format callback
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: arm: qcom,coresight-funnel: Add label for multi-ouput
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- [PATCH v2 7/7] arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 6/7] arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 5/7] arm64: dts: qcom: sm8450: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 3/7] phy: qcom: qmp-pcie: register second optional PHY AUX clock
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 4/7] phy: qcom: qmp-pcie: register PHY AUX clock for SM8[456]50 4x2 PCIe PHY
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: document PHY AUX clock on SM8[456]50 SoCs
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 2/7] phy: qcom: qmp-pcie: refactor clock register code
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 0/7] arm64: qcom-sm8[456]50: properly describe the PCIe Gen4x2 PHY AUX clock
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- RE: [RFC v3 03/16] clk: starfive: Rename file name "jh71x0" to "common"
- From: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
- RE: [RFC v3 02/16] reset: starfive: Convert the word "jh71x0" to "starfive"
- From: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
- [PATCH 4/4] media: platform: mtk-mdp3: Add support for MT8188 MDP3 components
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH 3/4] dt-bindings: media: mediatek: mdp3: Add support for MT8188 RDMA
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH 2/4] soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH 1/4] dt-bindings: soc: mediatek: Add support for MT8188 VPPSYS
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH 0/4] Support MediaTek MT8188 Media Data Path 3 (MDP3)
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: hwmon: Add NCT7363Y documentation
- From: Rob Herring <robh@xxxxxxxxxx>
- RE: [RFC v3 01/16] reset: starfive: Rename file name "jh71x0" to "common"
- From: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
- Re: [PATCH 13/13] ASoC: ti: davinci-i2s: Opitonally drive DX pin during capture streams
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v1 4/4] HID: Load firmware directly from file to IC
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v1 2/4] HID: Add Himax HX83102J touchscreen driver
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v1 3/4] HID: Add DRM panel follower function
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v1 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v1 0/4] HID: Add support for Himax HX83102j touchscreen
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- Re: [PATCH v6 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface
- From: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
- Re: [PATCH v5 09/21] drivers: crypto: meson: process more than MAXDESCS descriptors
- From: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
- Re: [PATCH v1 0/4] virt: vmgenid: Add devicetree bindings support
- From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
- [PATCH v5 0/2] hwmon: Driver for Nuvoton NCT7363Y
- From: baneric926@xxxxxxxxx
- Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v5 2/2] hwmon: Add driver for I2C chip Nuvoton NCT7363Y
- From: baneric926@xxxxxxxxx
- [PATCH v5 1/2] dt-bindings: hwmon: Add NCT7363Y documentation
- From: baneric926@xxxxxxxxx
- Re: [PATCH 0/4] regulator: Add X-Powers AXP717 PMIC support
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 10/11] pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- Re: [PATCH v2 4/4] virt: vmgenid: add support for devicetree bindings
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH 5/5] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB role switching
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- [PATCH 4/5] arm64: dts: qcom: pm7250b: Add a TCPM description
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- [PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- [PATCH 2/5] dt-bindings: usb: qcom,pmic-typec: Add support for the PM7250B PMIC
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- [PATCH 1/5] dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- [PATCH 0/5] Add TCPM support for PM7250B and Fairphone 4
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- Re: [PATCH v5 2/3] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc
- From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: mtd: atmel-nand: convert txt to yaml
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: mfd: Add rk816 binding
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: arm: qcom,coresight-funnel: Add label for multi-ouput
- From: Tingwei Zhang <quic_tingweiz@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: nvmem: Remove fsl,t1023-sfp in favor of fsl,layerscape-sfp
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2] spi: dt-bindings: jcore,spi: convert spi-jcore to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: adc: nxp,imx93-adc.yaml: Add calibration properties
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: rockchip: Add RGA2 support to rk3588
- From: Jianfeng Liu <liujianfeng1994@xxxxxxxxx>
- [PATCH v2 5/5] dt-bindings: hwmon: ibm,p8-occ-hwmon: move to trivial devices
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 4/5] dt-bindings: hwmon: stts751: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 3/5] dt-bindings: hwmon: pwm-fan: drop text file
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 1/5] dt-bindings: hwmon: as370: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 0/5] dt-bindings: hwmon: convert multiple devices to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH] sh: j2: drop incorrect SPI controller max frequency property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v8 8/8] perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v8 7/8] perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v8 6/8] perf: imx_perf: add support for i.MX95 platform
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v8 5/8] perf: imx_perf: fix counter start and config sequence
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v8 4/8] perf: imx_perf: refactor driver for imx93
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v8 3/8] perf: imx_perf: let the driver manage the counter usage rather the user
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v8 2/8] perf: imx_perf: add macro definitions for parsing config attr
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v8 1/8] dt-bindings: perf: fsl-imx-ddr: Add i.MX95 compatible
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v2] spi: dt-bindings: jcore,spi: convert spi-jcore to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2] spi: dt-bindings: jcore,spi: convert spi-jcore to dtschema
- From: Kousik Sanagavarapu <five231003@xxxxxxxxx>
- RE: [PATCH v7 5/8] perf: imx_perf: fix counter start and config sequence
- From: Xu Yang <xu.yang_2@xxxxxxx>
- RE: [PATCH v7 4/8] perf: imx_perf: refactor driver for imx93
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
- From: Sumit Garg <sumit.garg@xxxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] ASoC: dt-bindings: fsl-esai: Convert fsl,esai.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- RE: [PATCH 0/4] Add StarFive's StarLink-500 Cache Controller
- From: Joshua Yeong <joshua.yeong@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2] spi: dt-bindings: jcore,spi: convert spi-jcore to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: add IPQ9574 interconnect clocks support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH net-next v3 06/12] net: ethernet: oa_tc6: implement internal PHY initialization
- From: <Parthiban.Veerasooran@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: add IPQ9574 interconnect clocks support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: remoteproc: add Versal-NET platform
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v1 0/2] media: rockchip: rga: Add rk3568 support
- From: Jianfeng Liu <liujianfeng1994@xxxxxxxxx>
- Re: [PATCH v1 0/4] virt: vmgenid: Add devicetree bindings support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v1 1/2] dt-bindings: media: rockchip-rga: add rockchip,rk3588-rga
- From: Jianfeng Liu <liujianfeng1994@xxxxxxxxx>
- [PATCH v1 2/2] arm64: dts: rockchip: Add RGA2 support to rk3588
- From: Jianfeng Liu <liujianfeng1994@xxxxxxxxx>
- [PATCH v1 0/2] media: rockchip: rga: Add rk3568 support
- From: Jianfeng Liu <liujianfeng1994@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: mtd: atmel-nand: convert txt to yaml
- From: <Balamanikandan.Gunasundar@xxxxxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: i2c: nxp,pnx-i2c: Convert to dtschema
- From: Animesh Agarwal <animeshagarwal28@xxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Samuel Holland <samuel.holland@xxxxxxxxxx>
- [PATCH v4 2/2] ASoC: nau8325: new driver
- From: Seven Lee <wtli@xxxxxxxxxxx>
- [PATCH v4 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
- From: Seven Lee <wtli@xxxxxxxxxxx>
- [PATCH v4 0/2] ASoC: nau8325: Modify driver code and dtschema.
- From: Seven Lee <wtli@xxxxxxxxxxx>
- Re: [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm64: marvell: add solidrun cn9130 clearfog boards
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 5/5] dt-bindings: hwmon: ibm,p8-occ-hwmon: move to trivial devices
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: hwmon: pwm-fan: drop text file
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: hwmon: as370: convert to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2 3/3] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v2 2/3] iio: accel: adxl345: Add spi-3wire feature
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v2 1/3] iio: accel: adxl345: Update adxl345
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v2 0/3] iio: adxl345: add spi-3wire
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: [RISC-V] [tech-j-ext] [RFC PATCH 5/9] riscv: Split per-CPU and per-thread envcfg bits
- From: Samuel Holland <samuel.holland@xxxxxxxxxx>
- Re: [PATCH 2/4] arm64: dts: allwinner: drop underscore in node names
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH v3] dt-bindings: i2c: nxp,pnx-i2c: Convert to dtschema
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 0/4] Add RIIC support for Renesas RZ/V2H SoC
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v6 1/4] fpga: xilinx-spi: extract a common driver core
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 3/4] fpga: xilinx-selectmap: add new driver
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 0/4] fpga: xilinx-selectmap: add new driver
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 2/4] dt-bindings: fpga: xlnx,fpga-selectmap: add DT schema
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 4/4] fpga: xilinx-core: add new gpio names for prog and init
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH 2/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm64: marvell: add solidrun cn9130 clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH 0/2] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- RE: [PATCH net-next v3 08/12] net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames
- From: Selvamani Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>
- [PATCH v2 1/7] clk: qcom: gcc-sm7150: Make clk_init_data const and various fixes
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 4/7] dt-bindings: clock: qcom: Add SM7150 CAMCC clocks
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- Re: [PATCH 4/5] dt-bindings: hwmon: stts751: convert to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3 9/9] drm: xlnx: Intoduce TPG CRTC driver
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 7/9] drm/atomic-helper: Add select_output_bus_format callback
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 5/9] drm: xlnx: zynqmp_dpsub: Minimize usage of global flag
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 6/9] drm: xlnx: zynqmp_dpsub: Set input live format
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 3/9] drm: xlnx: zynqmp_dpsub: Add connected live layer helper
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 4/9] drm: xlnx: zynqmp_dpsub: Anounce supported input formats
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 2/9] drm: xlnx: zynqmp_dpsub: Update live format defines
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 1/9] drm: xlnx: zynqmp_dpsub: Set layer mode during creation
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v3 0/9] Setting live video input format for ZynqMP DPSUB
- From: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
- [PATCH v2 3/7] clk: qcom: Add Display Clock Controller driver for SM7150
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- [PATCH v2 0/7] Add dispcc, videocc and camcc for SM7150.
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- [PATCH v2 2/7] dt-bindings: clock: qcom: Add SM7150 DISPCC clocks
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- [PATCH v2 7/7] clk: qcom: Add Video Clock Controller driver for SM7150
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- [PATCH v2 6/7] dt-bindings: clock: qcom: Add SM7150 VIDEOCC clocks
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- [PATCH v2 5/7] clk: qcom: Add Camera Clock Controller driver for SM7150
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- Re: [PATCH 1/8] dt-bindings: block: add basic bindings for block devices
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH 4/8] block: implement NVMEM provider
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH v6 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] virt: vmgenid: add support for devicetree bindings
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 4/8] block: implement NVMEM provider
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [PATCH net-next v3 08/12] net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 1/8] dt-bindings: block: add basic bindings for block devices
- From: Bart Van Assche <bvanassche@xxxxxxx>
- [PATCH 8/8] mmc: block: set GENHD_FL_NVMEM
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 7/8] mmc: block: set fwnode of disk devices
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 6/8] mmc: core: set card fwnode_handle
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 5/8] dt-bindings: mmc: mmc-card: add block device nodes
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 4/8] block: implement NVMEM provider
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 3/8] block: add new genhd flag GENHD_FL_NVMEM
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 2/8] block: partitions: populate fwnode
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 1/8] dt-bindings: block: add basic bindings for block devices
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- [PATCH 0/8] block: implement NVMEM provider
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Mark Brown <broonie@xxxxxxxxxx>
- RE: [PATCH net-next v3 06/12] net: ethernet: oa_tc6: implement internal PHY initialization
- From: Selvamani Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: "Karel Balej" <balejk@xxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 5/5] dt-bindings: hwmon: ibm,p8-occ-hwmon: move to trivial devices
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 4/5] dt-bindings: hwmon: stts751: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 3/5] dt-bindings: hwmon: pwm-fan: drop text file
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 1/5] dt-bindings: hwmon: as370: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 0/5] dt-bindings: hwmon: convert multiple devices to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 2/2] iio: health: max30102: add support for max30101
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: health: maxim,max30102: add max30101
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 0/2] iio: health: max30102: add support for max30101
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH 13/13] ASoC: ti: davinci-i2s: Opitonally drive DX pin during capture streams
- From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- Re: (subset) [PATCH] dt-bindings: leds: pca963x: Convert text bindings to YAML
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: "Karel Balej" <balejk@xxxxxxxxx>
- Re: (subset) [PATCH] dt-bindings: leds: pca963x: Convert text bindings to YAML
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2] spi: dt-bindings: jcore,spi: convert spi-jcore to dtschema
- From: Kousik Sanagavarapu <five231003@xxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 2/4] dt-bindings: serial: fsl-linflexuart: add compatible for S32G3
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: arm: fsl: Document NXP S32G3 board
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: hwmon: lm87: convert to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: hwmon: lm87: convert to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v1 0/4] virt: vmgenid: Add devicetree bindings support
- From: "Landge, Sudan" <sudanl@xxxxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: "Karel Balej" <balejk@xxxxxxxxx>
- Re: [PATCH 00/31] Clean up thermal zone polling-delay
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: thermal: convert st,stih407-thermal to DT schema
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH v2 2/3] thermal: qcom: lmh: Check for SCM availability at probe
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH 0/4] regulator: Add X-Powers AXP717 PMIC support
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH 5/6] media: chips-media: wave5: refine SRAM usage
- From: Brandon Brnich <b-brnich@xxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: "Karel Balej" <balejk@xxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: "Karel Balej" <balejk@xxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: hwmon: max6650: convert to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/2] dt-bindings: hwmon: convert lm87 and max6650 to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH net-next v5 13/17] net: pse-pd: Use regulator framework within PSE framework
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] coresight: Add support for multiple output ports on the funnel
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: Re: [PATCH 5/6] media: chips-media: wave5: refine SRAM usage
- From: Ivan Bornyakov <brnkv.i1@xxxxxxxxx>
- [PATCH v2 2/2] dt-bindings: hwmon: max6650: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: hwmon: lm87: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v2 0/2] dt-bindings: hwmon: convert lm87 and max6650 to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: nvmem: Remove fsl,t1023-sfp in favor of fsl,layerscape-sfp
- From: Sean Anderson <sean.anderson@xxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH 1/1] ASoC: dt-bindings: fsl-esai: Convert fsl,esai.txt to yaml
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH net-next v5 13/17] net: pse-pd: Use regulator framework within PSE framework
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH 5/6] media: chips-media: wave5: refine SRAM usage
- From: Brandon Brnich <b-brnich@xxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: "Karel Balej" <balejk@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v3 2/2] phy: add driver for MediaTek XFI T-PHY
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH v3 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v3 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v3 2/4] dt-bindings: serial: fsl-linflexuart: add compatible for S32G3
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v3 1/4] dt-bindings: arm: fsl: Document NXP S32G3 board
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- [PATCH v3 0/4] NXP S32G3 SoC initial bring-up
- From: Wadim Mueller <wafgo01@xxxxxxxxx>
- Re: [PATCH net-next v3 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 13/13] ASoC: ti: davinci-i2s: Opitonally drive DX pin during capture streams
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: remoteproc: add Versal-NET platform
- From: Tanmay Shah <tanmay.shah@xxxxxxx>
- [PATCH RFC] arm64: dts: lx2160a: extend 32-bit, and add 64-bit pci regions
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v2 1/1] ASoC: dt-bindings: fsl-audmix: Convert fsl,audmix.txt to yaml
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH 0/5] Add RK816 PMIC support
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: (subset) [PATCH 1/2] dt-bindings: leds: qcom-lpg: Document PM6150L compatible
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: (subset) [PATCH] dt-bindings: leds: pca963x: Convert text bindings to YAML
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: arm: qcom,coresight-funnel: Add label for multi-ouput
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH v5 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: arm: qcom,coresight-funnel: Add label for multi-ouput
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 5/5] regulator: rk808: Add RK816 support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 3/5] pinctrl: rk805: Add rk816 pinctrl support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 2/5] mfd: rk8xx: Add RK816 support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 1/5] dt-bindings: mfd: Add rk816 binding
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 0/5] Add RK816 PMIC support
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: leds: add LED_FUNCTION_MOBILE for mobile network
- From: INAGAKI Hiroshi <musashino.open@xxxxxxxxx>
- [PATCH v4 2/2] hwmon: pmbus: adp1050: Add driver support
- From: Radu Sabau <radu.sabau@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: hwmon: pmbus: adp1050: add bindings
- From: Radu Sabau <radu.sabau@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: hwmon: max6650: convert to dtschema
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- RE: [PATCH v3 1/2] dt-bindings: hwmon: pmbus: adp1050: add bindings
- From: "Sabau, Radu bogdan" <Radu.Sabau@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: hwmon: max6650: convert to dtschema
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: hwmon: max6650: convert to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: spi: convert spi-jcore to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: hwmon: pmbus: adp1050: add bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: leds: add LED_FUNCTION_MOBILE for mobile network
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] dt-bindings: spi: convert spi-jcore to dtschema
- From: Kousik Sanagavarapu <five231003@xxxxxxxxx>
- Re: [PATCH v9 2/2] dt-bindings: mtd: fixed-partition: Add binman compatibles
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v9 1/2] dt-bindings: mtd: fixed-partitions: Add alignment properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 0/4] virt: vmgenid: Add devicetree bindings support
- From: Rob Herring <robh@xxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]