Use SPI common propteries 'spi-cs-setup-delay-ns' and 'spi-cs-hold-delay-ns', mark private properties 'fsl,spi-cs-sck-delay' and 'fsl,spi-sck-cs-delay' as depericated. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 26f8540cb101b..fef3534157a1d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -104,6 +104,11 @@ flash@0 { compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */ reg = <0>; spi-max-frequency = <1000000>; /* input clock */ + /* Add common SPI property */ + spi-cs-setup-delay-ns = <100>; + spi-cs-hold-delay-ns = <100>; + + /* Deprecated below property */ fsl,spi-cs-sck-delay = <100>; fsl,spi-sck-cs-delay = <100>; }; @@ -112,6 +117,11 @@ slic@2 { compatible = "maxim,ds26522"; reg = <2>; spi-max-frequency = <2000000>; + /* Add common SPI property */ + spi-cs-setup-delay-ns = <100>; + spi-cs-hold-delay-ns = <50>; + + /* Deprecated below property */ fsl,spi-cs-sck-delay = <100>; fsl,spi-sck-cs-delay = <50>; }; @@ -120,6 +130,11 @@ slic@3 { compatible = "maxim,ds26522"; reg = <3>; spi-max-frequency = <2000000>; + /* Add common SPI property */ + spi-cs-setup-delay-ns = <100>; + spi-cs-hold-delay-ns = <50>; + + /* Deprecated below property */ fsl,spi-cs-sck-delay = <100>; fsl,spi-sck-cs-delay = <50>; }; -- 2.34.1