On 20-06-24, 09:30, Guenter Roeck wrote: > On Wed, May 29, 2024 at 02:02:45PM +0800, Richard Zhu wrote: > > Add i.MX8QM HSIO PHY driver support. > > > > i.MX8QM HSIO has three lane PHY instances, and can be bound to the > > following controllers in the different use cases listed in below table. > > - two lanes capable PCIEA controller. > > - one lane PCIEB controller. > > - AHCI SATA controller. > > > > i.MX8QM HSIO PHYs support the following use cases. > > +----------------------------------------------------+ > > | | Lane0| Lane1| Lane2| > > |-------------------------------|------|------|------| > > | use case 1: PCIEAX2SATA | PCIEA| PCIEA| SATA | > > |-------------------------------|------|------|------| > > | use case 2: PCIEAX2PCIEB | PCIEA| PCIEA| PCIEB| > > |-------------------------------|------|------|------| > > | use case 3: PCIEAPCIEBSATA | PCIEA| PCIEB| SATA | > > +----------------------------------------------------+ > > > > Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> > > Reviewed-by: Frank Li <Frank.Li@xxxxxxx> > > Building alpha:allmodconfig ... failed > -------------- > Error log: > drivers/phy/freescale/phy-fsl-imx8qm-hsio.c: In function 'imx_hsio_set_mode': > drivers/phy/freescale/phy-fsl-imx8qm-hsio.c:459:15: error: implicit declaration of function 'FIELD_PREP' It should be fixed in -next tomorrow. I have applied a patch for that -- ~Vinod
